聚苯乙烯/蒙脱土熔融插层复合的研究

用熔融法制备了聚苯乙烯／蒙脱土插层复合材料，用Ｘ 射线衍射、ＤＳＣ等手段研究了复合材料的结构与性能．聚苯乙烯熔体不能插层于钠基蒙脱土中，但能插层于经有机化合物处理过的蒙脱土中．     

Preparation of Alum-borneol-PVP Drug-loaded Fibers by Electrospinning

The alum-borneol nanoemulsion(ABN), which combines the mineral medicine alum and the botanical medicine borneol, has been applied for approximately 40 years in the clinical treatment of burns, scalds, radiation dermatitis and shingles, and has a good curative effect. However, the current formula and dosage form of ABN pose problems of low borneol content and ease of precipitation, which greatly affects the efficacy of the drug. In this study, polyvinylpyrrolidone(PVP) was selected as a carrier mixed with different proportions of alum and borneol to produce alum-borneol-PVP fibers(ABPF) by electrospinning. The results showed that the stable system with good drug dispersion was 2:3(alum:borneol). The dissolution content of borneol from the ABPF was about 80% in 4 h, which was much higher than that of the alum-borneol liquid(ABL) and ABN. The ABPF membrane showed a more significant inhibitory effect on Staphylococcus aureus than the ABL and ABN. The composite fiber markedly increased the drug content of borneol, which was 800 times of that in ABN. The fiber had a higher solubility than the nanoemulsion in vitro, which is of great importance for the de-velopment of new forms for the clinical application of alum and borneol.     

基于四水听器的充水弹性管声速测量方法*

实验室中水声材料声学参数的测量主要在水声声管中进行。管内平面波声速是正确测量这些参数的基础。该文提出一种基于四水听器结合不同边界的测量充水弹性管中声速的新方法。该方法利用4个固定位置处的水听器,采用最小二乘的方法,使得两组水听器分别得到的声管末端入射波声压差值的平方最小的声速即为管内平面波声速。该方法利用单频信号,在每一频率点均可测得声速,可以在任一种声管末端边界下进行测量,同时无需知道各水听器到边界的精确距离,在文中的3种边界下声速测量结果具有很好的一致性,实验操作简单、误差很小。该方法的仿真结果与管内声速的理论值吻合得很好,同时实验测量结果与仿真值之间的误差很小,证明了方法的准确性以及鲁棒性,为声管声速测量提供一个很好的思路。     

用于矢量水听器的低频高灵敏度层合梁加速度传感器

压电加速度传感器是同振型矢量水听器的核心部件。为了满足低频高灵敏度矢量水听器的应用需求,提出并研究一种具有层合梁结构的低频高灵敏度加速度传感器。结合弹性力学和压电方程推导层合梁加速度传感器的加速度灵敏度解析解表达式,通过有限元仿真对层合梁加速度传感器尺寸进行优化,给出优化后的尺寸范围。从优化的尺寸范围中选取两种不同尺寸进行加速度传感器振动特性的仿真分析及实物制作(其中压电材料为PZT-5)与性能测试。仿真与测试结果均表明,相比已有的同尺寸金属梁加速度传感器,层合梁加速度传感器可以有效降低谐振频率并提升加速度灵敏度。当压电层厚度为0.5 mm时,加速度灵敏度最大提升3.9 dB,谐振频率下降23%。测试结果与理论分析相符。     

Synthesis and properties of novel soluble poly(amide‐imide)s with different pendant substituents

Two types of novel fluorinated diimide‐diacid monomers—[2,2′‐(4,4′‐(3′‐methylbiphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (III) and [2,2′‐(4,4′‐(3′‐(trifluoromethyl)biphenyl‐2,5‐diyl)bis(oxy)bis(3‐(trifluoromethyl)‐4,1‐phenylene))bis(1,3‐dioxoisoindoline‐5‐carboxylic acid)] (IV)—were respectively designed and prepared by the condensation of diamines I and II with two molar equivalents of trimellitic anhydride. From both diimide‐diacids, two series of novel poly(amide‐imide)s (PAIs) (IIIa–IIIe and IVa–IVe) bearing different pendant groups were prepared by direct polymerization with various aromatic diamines (a–e). All the PAIs had a high glass transition temperatures (T_gs, 232–265 °C), excellent thermal stability (exhibiting only 5% weight loss at 493–542 °C under nitrogen) and good solubility in various organic solvents due to the introduction of the bulky pendant groups. The cast films of these PAIs (80–90 μm) had good optical transparency (73–81% at 450 nm, 85–88% at 550 nm and 87–89% at 800 nm) and low dielectric constants (2.65–2.98 at 1 MHz). The spin‐coated films of these PAIs presented a minimum birefringence value as low as 0.0077–0.0143 at 650 nm and low optical absorption at the near‐infrared optical communication wavelengths of 1310 and 1550 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3243–3252     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

Half‐sandwich Ruthenium (II) complexes with triphenylamine modified dipyridine skeleton and application in biology/luminescence imaging

Four half‐sandwich ruthenium^II (Ru^II) complexes with triphenylamine‐modifed dipyridine frameworks were synthesized and characterized. The cytotoxicity of target complexes toward A549 (lung cancer cells), HeLa (cervical cancer cells) and HepG2 (hepatoma cells) were obtained by the MTT assay, which were superior to cisplatin with the IC₅₀ values changed from 2.4 ± 0.1 μM to 9.2 ± 2.7 μM. Meanwhile, complexes possess the ability of antimetastasis to cancer cells. Ru^II complexes could be transported by serum albumin, catalyze the conversion of NADH (the reduced state of nicotinamide‐adenine dinucleotide) to NAD⁺ and induce the accumulation of reactive oxygen species, which confirmed the antineoplastic mechanism of oxidation. Ru^II complexes could enter A549 cells followed by a non‐energy dependent cellular uptake mechanism, target lysosomes with the Pearson's colocalization coefficient of 0.75, lead to lysosomal damage, disturb the cell cycle (S phase), and eventually induce apoptosis. The results demonstrate that these Ru^II complexes are potential anticancer agents with dual functions, including metastasis inhibition and lysosomal damage.