脱氧核糖核酸与对二甲氨基偶氮苯邻羧酸作用机理的荧光光谱研究

通过实验,采用荧光光谱法研究了对二甲氨基偶氮苯邻羧酸(JJR)与脱氧核糖核酸(DNA)结合反应的特征.由Stern-Volmer方程和双倒数曲线Lineweaver-Burk方程获得了反应的猝灭常数Ksv=1×106～2×106 L/mol、结合常数KA≈0.5×106 mol/L以及对猝灭的类型做出了推断.通过热力学参数、离子强度实验讨论并得到它们以氢键、嵌插入、范德华力等几种方式作用.该反应的最佳实验条件为pH值控制在6.1左右;加入顺序为JJR+DNA+(B-R)适宜反应体系;线性范围在0～100 mg/L之间.     

Visible light driven deuteration of formyl C–H and hydridic C(sp3)–H bonds in feedstock chemicals and pharmaceutical molecules

Deuterium labelled compounds are of significant importance in chemical mechanism investigations, mass spectrometric studies, diagnoses of drug metabolisms, and pharmaceutical discovery. Herein, we report an efficient hydrogen deuterium exchange reaction using deuterium oxide (D₂O) as the deuterium source, enabled by merging a tetra-n-butylammonium decatungstate (TBADT) hydrogen atom transfer photocatalyst and a thiol catalyst under light irradiation at 390 nm. This deuteration protocol is effective with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds (e.g. α-oxy, α-thioxy, α-amino, benzylic, and unactivated tertiary C(sp³)–H bonds). It has been successfully applied to the high incorporation of deuterium in 38 feedstock chemicals, 15 pharmaceutical compounds, and 6 drug precursors. Sequential deuteration between formyl C–H bonds of aldehydes and other activated hydridic C(sp³)–H bonds can be achieved in a selective manner.

A selective hydrogen deuterium exchange reaction with formyl C–H bonds and a wide range of hydridic C(sp³)–H bonds has been achieved by merging tetra-n-butylammonium decatungstate photocatalyst and a thiol catalyst under 390 nm light irradiation.     

Water-Mediated Selective Synthesis of Pyrazolo[1,5-a]quinazolin-5(4H)-ones and [1,2,4]Triazolo[1,5-a]quinazolin-5(4H)-one via Copper-Catalyzed Cascade Reactions

A convenient and sustainable synthesis of pyrazolo[1,5-a]quinazolin-5(4H)-ones and [1,2,4]triazolo[1,5-a]quinazolin-5(4H)-one through copper-catalyzed cascade reactions of 2-bromobenzoates with 1H-pyrazol-5-amines or 1H-1,2,4-triazol-5-amine under ligand-free conditions in water is presented. It is notable that aqueous medium turned out to be crucial for the chemoselective formation of the title compounds. Compared with literature protocols, this new method showed advantages such as simple and sustainable procedure, commercially available starting materials, and convenient reuse of the reaction medium together with the copper catalyst.     

等离子体原子发射光谱法（ICP─AES）间接测定水样中的硫酸根

本文报导以Ｂａ２＋将样品溶液中的硫酸根（ＳＯ）以硫酸钡形式分离，用等离子体光谱法测定余量Ｂａ２＋，从而间接测得ＳＯ含量的方法。该法操作简便、快速、灵敏、准确，化学干扰和光谱干扰小，可准确测定低至０．２ｍｇ的硫酸根含量。方法适用于各种水样中硫酸根的测定，获得满意结果。     

Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.     

High‐Performance Ru1/CeO2 Single‐Atom Catalyst for CO Oxidation: A Computational Exploration

By means of density functional theory computations, we examine the stability and CO oxidation activity of single Ru on CeO₂(111), TiO₂(110) and Al₂O₃(001) surfaces. The heterogeneous system Ru₁/CeO₂ has very high stability, as indicated by the strong binding energies and high diffusion barriers of a single Ru atom on the ceria support, while the Ru atom is rather mobile on TiO₂(110) and Al₂O₃(001) surfaces and tends to form clusters, excluding these systems from having a high efficiency per Ru atom. The Ru₁/CeO₂ exhibits good catalytic activity for CO oxidation via the Langmuir–Hinshelwood mechanism, thus is a promising single‐atom catalyst.     

Differential interactions of plasmid DNA, RNA and endotoxin with immobilised and free metal ions

Separation of negatively charged molecules, such as plasmid DNA (pDNA), RNA and endotoxin forms a bottleneck for the development of pDNA vaccine production process. The use of affinity interactions of transition metal ions with these molecules may provide an ideal separation methodology. In this study, the binding behaviour of pDNA, RNA and endotoxin to transition metal ions, either in immobilised or free form, was investigated. Transition metal ions: Cu2+, Ni2+, Zn2+, Co2+ and Fe3+, typically employed in the immobilised metal affinity chromatography (IMAC), showed very different binding behaviour depending on the type of metal ions and their existing state, i.e. immobilised or free. In the alkaline cell lysate, pDNA showed no binding to any of the IMAC chemistries tested whereas RNA interacted significantly with Cu2+-iminodiacetic acid (IDA) and Ni2+-IDA but showed no substantial binding to the rest of the IMAC chemistries. pDNA and RNA, however, interacted to varying degrees with free metal ions in the solution. The greatest selectivity in terms of pDNA and RNA separation was achieved with Zn2+ which enabled almost full precipitation of RNA while keeping pDNA soluble. For both immobilised and free metal ions, ionic strength of solution affected the metal ion-nucleic acid interaction significantly. Endotoxin, being more flexible, was able to interact better with the immobilised metal ions than the nucleic acids and showed binding to all the IMAC chemistries. The specific interactions of immobilised and/or free metal ions with pDNA, RNA and endotoxin showed a good potential, by selectively removing RNA and endotoxin at high efficiency, to develop a simplified pDNA purification process with improved process economics.     

Chaotic micromixers using two-layer crossing channels to exhibit fast mixing at low Reynolds numbers

We report two chaotic micromixers that exhibit fast mixing at low Reynolds numbers in this paper. Passive mixers usually use the channel geometry to stir the fluids, and many previously reported designs rely on inertial effects which are only available at moderate Re. In this paper, we propose two chaotic micromixers using two-layer crossing channels. Both numerical and experimental studies show that the mixers are very efficient for fluid manipulation at low Reynolds numbers, such as stretching and splitting, folding and recombination, through which chaotic advection can be generated and the mixing is significantly promoted. More importantly, the generation of chaotic advection does not rely on the fluid inertial forces, so the mixers work well at very low Re. The mixers are benchmarked against a three-dimensional serpentine mixer. Results show that the latter is inefficient at Re = 0.2, while the new design exhibits rapid mixing at Re = 0.2 and at Re of O(10(-2)). The new mixer design will benefit various microfluidic systems.     

Unified boundary integral equation for the scattering of elastic and acoustic waves: solution by the method of moments

A unified boundary integral equation (BIE) is developed for the scattering of elastic and acoustic waves. Traditionally, the elastic and acoustic wave problems are solved separately with different BIEs. The elastic wave case is represented in a vector BIE with the traction and displacement vectors as unknowns whereas the acoustic wave case is governed by a scalar BIE with velocity potential or pressure as unknowns. Although these two waves can be unified in the form of a partial differential equation, the unified form in its BIE counterpart has not been reported. In this work, we derive the unified BIE for these two waves and then show that the acoustic wave case can be derived from this BIE by introducing a shielding loss for small shear modulus approximation; hence only one code needs to be maintained for both elastic and acoustic wave scattering. We also derive the asymptotic Green's tensor for zero shear modulus and solve the corresponding vector equation. We employ the method of moments, which has been widely used in electromagnetics, as a numerical tool to solve the BIEs involved. Our numerical experiments show that it can also be used robustly in elastodynamics and acoustics.