Cyclopalladated ferrocenylimine as an efficient catalyst for the syntheses of diarylmethane derivatives

The cyclopalladated ferrocenylimine adducts Ia , Ib , Ic were evaluated in the Suzuki cross‐coupling reaction of benzyl halides with arylboronic acids. The tricyclohexylphosphine adduct Ia exhibited highly catalytic activity for the coupling of aryl and heteroaryl boronic acids containing various functional groups with benzylic bromides and chlorides (up to 99% yield), furnishing diarylmethane derivatives with low catalyst loading (1 mol%). It is worth noting that catalyst Ia can be reused eight times without losing its catalytic activity. Copyright © 2012 John Wiley & Sons, Ltd.     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

有机层界面对双层有机发光二极管复合效率的影响

建立了双层有机发光二极管中载流子在有机层界面复合的无序跳跃理论模型.由于有机分子材料的空间及能带结构的无序性，采用刚体模型处理有机层界面问题是不恰当的，而采用无序跳跃模型比较合理.复合效率及复合电流由载流子跳跃距离、有机层界面的有效势垒高度及该界面处的电场强度分布所决定：在双层器件ITO/α-NPD/Alq₃/Al中，当所加电压小于19.5V时，复合效率随着载流子跳跃距离的增加而增加，而大于19.5V时，复合效率随着其距离的增加而减少；复合效率随着有机层界面有效势垒高度的增加而增加； 关键词： 有机层界面 双层有机发光二极管 复合效率 有效势垒高度 无序跳跃模型     

CuAPTPP-TDI-TiO2光催化微球的合成及其光催化性能 (cited: 1)

采用Adler法合成了5-(4-氨基苯基)-10,15,20-三苯基卟啉铜配合物(CuAPTPP),通过甲苯二异氰酸酯(TDI)的桥联作用对TiO₂微球进行表面修饰,使TDI分子中的两个活性TDI基团分别与TiO₂表面的羟基和CuAPTPP的氨基反应,将CuAPTPP敏化剂分子以化学键合的方式固定在TiO₂表面,形成光催化微球CuAPTPP-TDI-TiO₂．通过FT-IR、XRD、SEM、EA、UV-Vis和DRS等测试手段对CuAPTPP-TDI-TiO₂进行结构表征．讨论了桥联分子TDI修饰量对光催化微球性能的影响,确定了TDI与TiO₂的最佳摩尔比．以亚甲基蓝(MB)为降解对象,考察了CuAPTPP-TDI-TiO₂微球的可见光催化性能．结果表明,桥联分子TDI在CuAPTPP与TiO₂微球表面形成了牢固的化学键,复合微球在150 W氙灯辐照下降解10 mg/LMB溶液,120 min降解率可达98.7%,其降解率过程服从一级动力学规律,测得降解速率常数为5.1×10^-2 min^-1,半衰期为11.3 min．催化微球在回收4次的条件下,对MB的降解率仍保持在90%以上．     

High-Tc planar SQUID gradiometer for eddy current non-destructive evaluation

This paper reports the fabrication and test of a high-Tc SQUID planar gradiometer which is patterned from YBCO thin film deposited on a SrTiO3 bicrystal substrate. The measurement of noise spectrum at 77K shows that the white noise at 200 Hz is about 1×10^-4 φ0/√Hz. The minimal magnetic gradient is measured and the results suggest that the minimal magnetic gradient is 94 pT/m. The planar gradiometer is used in non-destructive evaluation （NDE） experiments to detect the artifacts in conducting aluminium plates by performing eddy current testing in an unshielded environment. The effect of the exciting coil dimension on the NDE results is investigated. By mapping out the induced field distribution, flaws about 10mm below the plate surface can be clearly identified.     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Multifunctional land‐use value mapping and space type classification: A case study of Puge County,China

Land exhibits diverse functions under the combined influence of natural and human forces. A production–living–ecology functional classification system was constructed by integrating land, ecosystem, and landscape functions. The land functional value was calculated by systematically integrating ecosystem service value assessments. The primary and secondary functions, as well as combinations of different land‐use types, were determined using vertical and horizontal comparison methods. The production–living–ecology ranges were then delineated in Puge County, which is a typical mountain county in China. The production–living–ecology functions identified were well connected with the current land‐use types. The “production–living–ecology” space in Puge County showed obvious multifunctionality and agglomeration. The function identification system proposed in this paper integrated multiple methods, overcame the difficulty of direct quantitative identification of land functions. The methods used to map and quantify land function will enhance our ability to understand and model land system changes and adequately inform policies and planning. Summary for Managers

• The function valuation method constructed in this paper could be used to reflect the multifunctionality and importance of land use and provide guidance and a quantitative basis for regional development planning.
• The spatial classification results provided in this paper could offer a valuable reference for the land management department to scientifically formulate land use planning.
• Under the goal of creating a group‐type urban development pattern and constructing an ecological protection pattern in Puge County, the hotspot analysis results of this paper can provide decision‐making tools and alternative spatial plans.