强冲击加载条件下的钨合金的界面研究

借助定量金相、扫描电子显微镜、透射电子显微镜等微观分析手段对钨质量分数为９３％的钨合金在１５～５０ＧＰａ冲击压力下微观结构响应性态进行了考察，发现了一些钨合金所特有的现象，即钨颗粒与粘结相交界处出现成分迁移，新相析出；并结合断口分析，探讨了钨合金在冲击作用下发生断裂的微观特征与韧脆转化间的关系及其物理本质。     

实验室废液的回收及效果评价——以“铬废液回收及评价”为例

This paper introduces an experiment about waste liquid recovery and effect evaluation in laboratory. Through this experiment, the basic operations of crystal preparation, chemical analysis and instrumental analysis are further consolidated. At the same time, it allows students to experience a series of possible problems of condition selection and control in the process of waste liquid treatment. We hope to improve the students' ability to analyze and solve problems, enhance their interest in learning, and strengthen their humanistic education.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

Dynamic study of photosensitized one-electron oxidation of polyG by menadione

Quinones including menadione are ubiquitous in nature. They play important roles in aerobic respira- tion and photosynthesis[1,2]. In addition, exogenous quinones are used as antibiotics and anticancer drugs. Their function is closely related to their red…     

Monitoring of mutagenic process with piezoelectric quartz crystal impedance analysis

A novel method for monitoring of mutagenic process of dimethyl sulfate to Salmonella typhimurium strain (TA100) was proposed by using piezoelectric quartz crystal impedance (PQCI) analysis technique. The time courses of responses piezoelectric impedance parameters for a quartz crystal in a culture system were simultaneously obtained and discussed. It was found that the motional resistance variation (DeltaR(m)) increases and frequency shift (Deltaf) of PQC sensor decreases correspondingly during the mutagenic process of the bacteria. These parameters could reflect the variations of viscosity and density of culture system. By fitting DeltaR(m) versus time curves toward Gompertz bacterial growth model, we obtained and discussed the bacterial growth parameters for both normal growth and mutagenic process. The experiments showed that the proposed method could provide real time and multidimensional impedance information to the monitoring of mutagenic process.     

Detection of metal ions using ion-channel sensor based on self-assembled monolayer of thioctic acid

Gold electrodes were chemically modified with thioctic acid monolayer designed to mimic biological ion-channel membranes. The technique was then used in the determination of alkali, alkaline earth, thallium(I), and lanthanum metal cations as analytes. Cyclic voltammograms (CV) of [Fe(CN)6]³⁻ an electroactive marker, were measured in the presence of the various types of analyte cations. In the absence of the analyte cation, electrostatic repulsion between the marker anions and the carboxylate groups of the receptor monolayer hindered the approach of the marker anion to the electrode surface and hence hindered its reduction. The modified electrodes responded well to the metal cations except the alkali metal cations. The sensors could detect the trivalent cation La³⁺ at concentrations as low as 10⁻⁸ M. The response of the sensor to the metal cations increase in the order alkali metal3+ can be discriminated in the ratio 1:100. This makes it possible to determine the trivalent ion in a sample matrix containing monovalent and divalent cations. Thallium(I) ion showed marked deviation in its response as compared to monovalent ions of the alkali metals. The ion-channel sensor based on self-assembled monolayer of thioctic acid therefore offers a potential alternative technique for the selective determination of metal ions.     

In Situ Monitoring of Generation and Precipitation of Ferric Hydroxide Sol with a Piezoelectric Quartz Crystal Impedance Analyzer

The piezoelectric quartz crystal (PQC) impedance technique was applied to monitor in situ generation and precipitation of the ferric hydroxide sol in aqueous solutions at 90 degrees C. Equivalent circuit parameters and resonant frequencies as well as the half-peak width of the electroacoustic conductance spectrum deltaf(G1/2) for the PQC resonance were obtained and analyzed. Three stages, sol generation and simultaneous adsorption, adsorption equilibrium, and precipitation of ferric hydroxide sol could be identified in the process of adding the ferric nitrate solution into the hot water. A scheme of two consecutive reactions occurring at the electrode/solution interface was used to analyze the adsorption kinetics of ferric hydroxide sol onto the Au electrode. In addition, the electrolyte-induced precipitation of the colloid was monitored and discussed. Temperature effect on the PQC resonance behavior in liquid was also investigated. Since the PQC impedance technique provides multidimensional piezoelectric information in situ, it is highly recommended for studying the process of sol-gel generation and precipitation. Copyright 2001 Academic Press.     

Formation of α-Mn2O3 nanorods via a hydrothermal-assisted cleavage-decomposition mechanism

A hydrothermal cleavage-decomposition mechanism was used to synthesize single-crystal α-Mn₂O₃ nanorods at 160 °C for 16 h using KMnO₄ as manganese source and CTAB as reducing regent. The as-synthesized products were characterized by powder X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy and infrared spectrum. The results indicate that the reaction temperature is a crucial factor for the formation of α-Mn₂O₃ nanorods. These nanorods exhibit single-crystal nature, and have an average diameter of 36 nm and lengths of up to 1 μm. Based on our experimental results, a hydrothermal cleavage-decomposition mechanism has been proposed on the formation of α-Mn₂O₃ nanorods.