谷值电流型脉冲序列控制开关变换器及其能量建模研究

脉冲序列控制是针对工作于电感电流断续导电模式的开关变换器提出的一种非线性、离散控制技术.当开关变换器工作在电感电流连续导电模式时,脉冲序列控制开关变换器存在低频振荡现象,严重影响了脉冲序列控制开关变换器的稳态及瞬态性能.针对这一问题,本文提出一种谷值电流型脉冲序列控制方法,将脉冲序列控制的应用范围从电感电流断续导电模式扩展到电感电流连续导电模式.建立了谷值电流型脉冲序列控制开关变换器的能量迭代模型,并与传统脉冲序列控制开关变换器的能量模型进行对比.结果表明谷值电流型脉冲序列控制电感电流连续导电模式开关变换器具有与传统脉冲序列控制电感电流断续导电模式开关变换器相同的能量传递模式,从而在根本上消除了传统脉冲序列控制电感电流连续导电模式变换器存在的低频振荡现象.     

基于BP神经网络的复杂彩色图像文本定位*

针对复杂彩色图像中文本的特征,提出了基于小波变换和BP神经网络甄别文本区域的算法.该算法首先利用文本块的边缘特征遴选出备选图像块,而后采用小波变换提取备选图像块的纹理特征,把这些纹理特征参量连同图像块的颜色特征和笔画特征参量输入训练好的BP神经网络,判断备选图像块是否包含文本.该方法运算简单,定位时间短.采用专用的文本定位比赛用图进行实验的结果表明,定位准确率可达到92％,召回率为87.4%.     

激光能量对激光诱导Cu等离子体特征辐射强度、电子温度的影响

利用Nd:YAG激光(波长1 064 nm,脉宽10 ns)烧蚀金属Cu靶获得等离子体 .改变激光脉冲能量,观测到Cu的原子谱线和离子谱线随激光脉冲能量有不同的变化关系, 但都在330 mJ/pulse时,谱线强度达到最大,随后在330 mJ～370 mJ/pulse间出现一小平台 ,能量继续增加,各谱线强度减小.同时,使用烧蚀Cu靶产生的五条原子谱线(465.11 nm,5 10.55 nm,515.32 nm,521.82 nm,529.25 nm)的相对强度,在局部热力学平衡近似下,利用B oltzmann图的最小二乘法拟合,测定了不同激光能量下Cu等离子体的电子温度.随激光能量的增加,电子温度近似单调地从1.02×104 K上升到1.46×104 K后,反而有所下降.     

火灾烟雾颗粒凝并分形特性研究

火灾烟雾颗粒因布朗运动由初期的主粒子凝并形成大颗粒的凝团结构，其外形呈现出分形特征，根据分形理论对火灾烟雾颗粒凝团结构进行分析研究，采用场发射扫描电镜对多种材料的烟雾颗粒图像进行测试，通过对烟雾凝团图像进行处理，获得了火灾探测中常见的多种材料的分形维数和分形系数，给出了烟雾颗粒的主粒子粒径，并对其影响因素进行了对比分析，为火灾烟雾探测中颗粒凝并分形特性研究提供有益的探索. 关键词： 火灾 烟雾 颗粒 凝并 分形     

A kind of new algebraic Rossby solitary waves generated by periodic external source

In the article, by employing multiple-scale, perturbation method, a new model is derived to describe the algebraic Rossby solitary waves generated by periodic external source in stratified fluid. The local conservation laws and analytic solutions of the model are obtained, and the breakup properties are discussed. By numeric simulation, some problems on the generation and evolution of the algebraic solitary waves under the influence of periodic external source are theoretically investigated. The results show that besides the solitary waves, an additional harmonic wave appears in the region of the external source forcing. Furthermore, the periodic variation of the external source forcing can prevent solitary waves from breaking. Meanwhile, the detuning parameter has an important effect on the breakup of the algebraic Rossby solitary waves.     

Facile synthesis of biphenyl-fused BODIPY and its property

A biphenyl-fused BODIPY was synthesized through a facile oxidative cyclization of peripheral aryl-substituents at the β-position of the BODIPY unit. The extended π-system of the fused BODIPY induces near-infrared (NIR) absorption and strong π-π interactions in the solid state. These features are beneficial for the application of the dye as a functional material. The biphenyl-fused BODIPY dye was demonstrated to exhibit photocurrent conversion ability on the basis of its n-type semiconducting property.     

Multifunctional Non‐Viral Delivery Systems Based on Conjugated Polymers

Multifunctional nanomaterials with simultaneous therapeutic and imaging functions explore new strategies for the treatment of various diseases. Conjugated polymers (CPs) are considered as novel candidates to serve as multifunctional delivery systems due to their high fluorescence quantum yield, good photostability, and low cytotoxicity. Highly sensitive sensing and imaging properties of CPs are well reviewed, while the applications of CPs as delivery systems are rarely covered. This feature article mainly focuses on CP‐based multifunctional non‐viral delivery systems for drug, protein, gene, and cell delivery. Promising directions for the further development of CP‐based delivery systems are also discussed.

     

Controllable synthesis of well-ordered TiO2 nanotubes in a mixed organic electrolyte for high-efficiency photocatalysis

Well-ordered TiO 2 nanotube arrays (TNAs) were fabricated by electrochemical anodization in a mixed organic electrolyte consisting of ethylene glycol and glycerol. The morphology, structure, crystalline phase, and photocatalytic properties of TNAs were characterized by using TEM, SEM, XRD and photodegradation of methylene blue. It was found that the morphology and structure of TNAs could be significantly influenced by the anodization time and applied voltage. The obtained tube length was found to be proportional to anodization time, and the calculated growth rate of nanotubes was 0.6 m/h. The microstructure analysis demonstrated that the diameter and thickness of the nanotubes increased with the increase of anodization voltage. The growth mechanism of TNAs was also proposed according to the observed relationship between current density and time during anodization. As expected, the obtained TNAs showed a higher photocatalytic activity than the commercial TiO 2 P25 nanoparticles.     

Bridged polyhedral oligomeric silsesquioxane (POSS): A potential member of silsequioxanes

Two novel and well-defined polyhedral oligomeric silsesquioxanes（POSS） with two same Si₈O₁₂ cores and a reactive NH group, namely bridged-POSS（2a and 2b）,have been prepared by the traditional ’corner-capping’ reaction.X-ray diffraction demonstrates that those two POSS have the similar T₈ structure.From the thermo-gravimetric analysis,bridged-POSS shows the belter thermal degradation stability than the contrastive POSS.