钯催化芳香硝基化合物与烯烃的选择性还原羰化酰胺化反应

与芳香胺相比,芳香硝基化合物具有廉价易得、官能团兼容性好等优点,作为氮源在下游含氮化学品合成中具有广泛的应用.目前烯烃羰化酰胺化反应绝大多数以胺类化合物为氮源,其中直链和支链酰胺产物的选择性主要是通过具有特定电子和位阻特性的配体调控实现.已报道的芳香硝基化合物的还原酰胺化反应研究中,需要外加还原剂或者利用金属羰基化合物Mo(CO)6释放的CO为羰基源和还原剂.本文发展了一种毋须外加还原剂的钯催化芳香硝基化合物与烯烃的还原羰化酰胺化反应新方法.研究发现,钯金属催化剂(特别是离子型)的抗衡阴离子是还原羰化酰胺化反应中化学选择性和羰化区域选择性的关键因素.抗衡阴离子为氯离子、硼酸为助剂时,最优钯前驱物K2PdCl4的产物主要为支链酰胺,此时不同的膦配体并不能调控其区域选择性,这与胺的烯烃酰胺化反应可以通过配体调控羰化的区域选择性表现出明显的不同.含氮中间体原位捕捉、硝基化合物还原下游可能中间体对照实验等研究表明,芳香硝基化合物在以一氧化碳为还原剂的催化还原体系下被完全脱氧还原为氮烯(Ar-N:),再经过烯酰胺中间体进一步烯键还原得到相应的支链酰胺;当离子型钯前驱物的抗衡阴离子配位性较弱时,最优钯前驱物为Pd(CH3CN)4(OTf)2时,以直链酰胺为主要产物,此时不同的膦配体可以调控酰胺化的区域选择性.同样的机理研究表明,在该催化剂体系下芳香硝基化合物首先被还原为芳基胺,然后再发生与现有报道类似的胺类化合物的烯烃羰化酰胺化反应.这两个催化反应体系都表现出了较好的底物适用性,并且可以高效地应用于除草剂(敌稗)的一步合成.本文为以硝基化合物为起始氮源,通过催化控制生成特定含氮中间体,从而可控合成不同的含氮化学品提供了一条新思路.     

选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱及其光催化选择性双键转移的研究

席夫碱是一类具有多功能结构的化合物.本文使用二苯甲胺和苯乙酮为原料合成了(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱,并进行了光催化选择性双键转移的研究.结果 表明,当苯乙酮与二苯甲胺投料比为3∶1,先在135C反应4h,然后升温到165C继续反应3h,可选择性合成(1,3-二苯基-2-亚丁烯基)二苯甲胺席夫碱.该席...     

碳纤维微电极负载金纳米粒子用于绿茶中儿茶素的检测

本文开发了基于纳米金修饰的碳纤维超微电极(CFME)用于儿茶素的定量检测。通过使用柠檬酸三钠还原氯金酸制得纳米金粒子(AuNPs),采用恒电位电沉积法将纳米金修饰在CFME表面。在pH 2.00的Tris-HCl缓冲溶液中,采用差分脉冲法和循环伏安法考察了修饰前后电极对儿茶素的电催化性能。结果表明,纳米金修饰电极对儿茶素具有明显的电催化效果。在优化实验条件下,纳米金修饰的碳纤维超微电极(AuNPs/CFME)与儿茶素浓度在1.00×10^-3~10.0μmol/L范围内呈良好的线性关系,且AuNPs/CFME的电化学性能非常稳定,具有良好的重现性。该方法操作简单,准确性高,可用于对儿茶素进行定量检测。     

两个由双咪唑基配体构筑的镉配合物的合成、晶体结构及理论计算

通过水热法合成了2个新的金属-有机配位聚合物[Cd(nba)_2(mbix)]_2(1)和[Cd((bib)_2Br_2]_n(2)(Hnba=4-硝基苯甲酸,mbix=1,3-双(咪唑基-1-基)苯,bib=1,4-双(咪唑基-1-基)丁烷),并对其进行了元素分析、红外光谱、荧光光谱、单晶和粉末X射线衍射测定。配合物1为零维结构,并通过π-π堆积形成了三维超分子结构;配合物2为具有(4,4)拓扑的二维网状结构。此外,还用高斯03程序PBE0/LANL2DZ方法对配合物1和2进行了自然键轨道(NBO)分析,计算结果表明配位原子与Cd (Ⅱ)离子之间存在着共价作用。     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

超长碳纳米管的结构调控与制备：进展与挑战

碳纳米管由于其优异的性能和广泛的应用,在过去近三十年中引起了研究者广泛的研究兴趣。在众多不同类型的碳纳米管中,超长碳纳米管由于具有厘米级甚至分米级以上的宏观长度和相对完美的结构,展示出了优异的力学、电学、热学等多方面的优异性能,在透明显示、微电子产业、超强纤维、航空航天等领域具有广阔的应用前景。超长碳纳米管的结构控制制备是充分开发其优异性能并实现其实际应用的关键。在过去二十多年间,超长碳纳米管的研究取得了重要的进展。但同时,在结构控制与批量制备方面也面临巨大的挑战,还存在许多尚未解决的科学与技术难题,从而限制了其实际应用。本文对超长碳纳米管的生长机理、结构控制、选择性制备以及优异性能方面的进展及其背后的创新思想进行了系统的回顾;与此同时,讨论了超长碳纳米管近年来的研究进展、目前面临的挑战和未来的重点攻关方向。期望本文能为超长碳纳米管的可控合成、批量制备以及未来应用提供更多的启发和借鉴,为早日实现高质量超长碳纳米管的宏量制备和产业化起到一些推动作用。     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

A Sustainable Solid Electrolyte Interphase for High‐Energy‐Density Lithium Metal Batteries Under Practical Conditions

High‐energy‐density Li metal batteries suffer from a short lifespan under practical conditions, such as limited lithium, high loading cathode, and lean electrolytes, owing to the absence of appropriate solid electrolyte interphase (SEI). Herein, a sustainable SEI was designed rationally by combining fluorinated co‐solvents with sustained‐release additives for practical challenges. The intrinsic uniformity of SEI and the constant supplements of building blocks of SEI jointly afford to sustainable SEI. Specific spatial distributions and abundant heterogeneous grain boundaries of LiF, LiN_xO_y, and Li₂O effectively regulate uniformity of Li deposition. In a Li metal battery with an ultrathin Li anode (33 μm), a high‐loading LiNi_0.5Co_0.2Mn_0.3O₂ cathode (4.4 mAh cm^?2), and lean electrolytes (6.1 g Ah^?1), 83 % of initial capacity retains after 150 cycles. A pouch cell (3.5 Ah) demonstrated a specific energy of 340 Wh kg^?1 for 60 cycles with lean electrolytes (2.3 g Ah^?1).     

Rational Design of a Two‐Photon Fluorogenic Probe for Visualizing Monoamine Oxidase A Activity in Human Glioma Tissues

Monoamine oxidases have two functionally distinct but structurally similar isoforms (MAO‐A and MAO‐B). The ability to differentiate them by using fluorescence detection/imaging technology is of significant biological relevance, but highly challenging with available chemical tools. Herein, we report the first MAO‐A‐specific two‐photon fluorogenic probe ( F1 ), capable of selective imaging of endogenous MAO‐A enzymatic activities from a variety of biological samples, including MAO‐A‐expressing neuronal SY‐SY5Y cells, the brain of tumor‐bearing mice and human Glioma tissues by using two‐photon fluorescence microscopy (TPFM) with minimal cytotoxicity.     

Two‐Step Oxidation Synthesis of Sulfur with a Red Aggregation‐Induced Emission

Sulfur is not normally considered a light‐emitting material, even though there have been reports of a dim luminescence of this compound in the blue‐to‐green spectral region. Now, it is shown how to make red‐emissive sulfur by a two‐step oxidation approach using elemental sulfur and Na₂S as starting materials, with a high photoluminescence quantum yield of 7.2 %. Polysulfide is formed first and is partially transformed into Na₂S₂O₃ in the first step, and then turns back to elemental S in the second step. The elevated temperature and relatively oxygen‐deficient environment during the second step transforms Na₂S₂O₃ into Na₂SO₃ incorporated with oxygen vacancies, thus resulting in the formation of a solid‐state powder consisting of elemental S embedded in Na₂SO₃. It shows aggregation‐induced emission properties, attributed to the influence of oxygen vacancies on the emission dynamics of sulfur by providing additional lower energy states that facilitate the radiative relaxation of excitons.