Silver‐Mediated Intermolecular 1,2‐Alkylarylation of Styrenes with α‐Carbonyl Alkyl Bromides and Indoles

A new iron‐facilitated silver‐mediated radical 1,2‐alkylarylation of styrenes with α‐carbonyl alkyl bromides and indoles is described, and two new C?C bonds were generated in a single step through a sequence of intermolecular C(sp³)?Br functionalization and C(sp²)?H functionalization across the alkenes. This method provides an efficient access to alkylated indoles with broad substrate scope and excellent selectivity.     

Monomodal polyelectrolyte complex nanoparticles of PDADMAC/Poly(styrenesulfonate): preparation and protein interaction

The binding of the model proteins HSA, LYZ and MYO to PEC nanoparticles is reported. PEC particles were prepared by mixing solutions of PDADMAC either with PSS or PMA-MS, followed by consecutive centrifugation. Monomodal anionic (PEC-1.50) and cationic (PEC-0.66) PEC particles were obtained using non-stoichiometric mixing ratios. PEC/protein conjugates were prepared by adding charged protein solutions to dispersions of respective like charged PEC particles, followed by one centrifugation step. Mixing proteins and PEC particles under attractive conditions led to flocculation of the dispersion. From CD, DLS and AFM the following trend for protein binding at PEC particles under repulsive conditions was obtained: HSA/PEC-1.50 > MYO/PEC-1.50 > LYZ/PEC-0.66. Protein uptakes up to 0.33 g x g(-1) (protein/PEC) (CD) and particle diameter enlargements up to 13 nm (AFM) were obtained at c(PROT) = 0.091 mg . mL(-1). Furthermore, novel spin coated films of PEC particles were interacted with proteins under both repulsive and attractive conditions. In-situ ATR FT-IR spectroscopy revealed that the adsorbed amount of HSA and LYZ under attractive conditions was significantly higher than under repulsive ones, which is analogous to protein adsorption at polyelectrolyte multilayers terminated either by polycation or polyanion. Similarly to the dispersed PEC/protein conjugates, under repulsive conditions the uptake of HSA was higher compared to LYZ. The shown protein uptake under repulsive conditions is related to concepts of mild enzyme or protein binding at nonbiogenic substrates.     

用水热法在铁铬铝合金片上原位合成MCM-22沸石膜

 采用水热法在铁铬铝合金片载体上原位合成了MCM-22沸石膜,并采用X射线衍射和扫描电子显微镜对沸石膜进行了表征,探讨了成膜的影响因素. 结果表明,载体预处理条件对合成沸石膜的品质有较大的影响. 载体仅经碱处理后合成的沸石膜稀疏而不连续; 载体先经碱处理再经酸处理后可得到连续致密的沸石膜,且晶片取向均一; 载体预先涂覆Al2O3胶过渡层后制得的MCM-22沸石膜经超声波清洗后不会脱落,表明沸石膜与载体间的结合力增强. 此外,增大晶化母液量有利于沸石膜的生长.     

Barrier properties of polymer/alumina nanocomposite membranes fabricated by atomic layer deposition

Novel polymer/ceramic nanocomposite membranes were fabricated, characterized and tested for their barrier performance. Atomic layer deposition (ALD) was used to deposit alumina films on primary, micron-sized (16 and 60 μm) high-density polyethylene (HDPE) particles at a rate of 0.5 nm/cycle at 77 °C. Well-dispersed polymer/ceramic nanocomposites were obtained by extruding alumina coated HDPE particles. The dispersion of alumina flakes can be controlled by varying the number of ALD coating cycles and substrate polymer particle size. The diffusion coefficient of fabricated nanocomposite membranes can be reduced to half with the inclusion of 7.29 vol.% alumina flakes. However, a corresponding increase in permeability was also observed due to the voids formed at or near the interface of the polymer and alumina flakes during the extrusion process, as evidenced by electron microscopy. The low surface wettability of the alumina outerlayers was believed to be one of the main reasons of void formation. Particle surface wettability was improved using 3-aminopropyltriethoxysilane (APS) to coat the particle ALD surface modified polymer particles prior to extrusion. The diffusion coefficient and permeability of the membrane using surfactant-modified particles decreased by 20%, relative to the non-modified case.     

缩比模型的宽频时域太赫兹雷达散射截面(RCS)研究

本文首次以钛宝石飞秒激光振荡级为抽运源,搭建了国内首套宽频时域太赫兹雷达(带宽0.1—1.3 THz)并进行了基于标准球的系统校正验证.利用该雷达测量了太赫兹波段三种缩比模型的散射时域信号.通过改进后的后向投影算法对模型的轮廓外形进行了成像研究,验证了新型时域散射信号成像机理.太赫兹雷达更高的频率,宽谱的特征和高分辨率成像的能力有望用于隐形外形设计过程,成为新兴的太赫兹散射特征研究平台.     

Scalable synthesis of palladium nanoparticle catalysts by atomic layer deposition

Potential applications in drug delivery from nanostructures composed of two oppositely charged polymethacrylates, eudragit^? L100 (EL) and eudragit^? EPO (EE), loaded with three model basic drugs (D), atenolol, propranolol, and metroclopramide were evaluated. The self-organized nanoparticles based on drug-interpolyelectrolyte complexes (DIPEC), (EL-D₅₀)?CEE_X, were obtained by mixing the aqueous dispersions of both polyelectrolytes at room temperature in an ultrasound bath. Dispersions of (EL-D₅₀) neutralized with increasing proportions of EE exhibited a rise of turbidity, particle sizes in the range of 150?C400?nm, and high negative zeta potential. The sign of zeta potential was shifted from negative to positive by changes in composition of DIPEC. Freeze dried DIPEC were easily redispersed in water yielding nearly the same parameters of fresh dispersions. In vitro release experiments using Franz cells showed that DIPEC systems behave as a drug reservoir that slowly releases the drug as water is placed in the receptor compartment. The release rate was raised by ionic exchange with counterions present in simulated physiological fluids placed in the receptor media. Delivery of D from DIPEC exhibited a remarkable robustness toward simulated physiological media of different pH. The DIPEC systems exhibit interesting properties to design nanoparticulate drug delivery systems for oral and/or topical routes.     

Super-thin cloaks mediated by spoof surface plasmons

We demonstrated the possibility of designing super-thin electromagnetic cloaks based on spoof surface plasmon (SSP). Using a metamaterial layer, incident waves can be coupled into SSP efficiently at the air/metamaterial interface. Due to the strong surface confinement of SSP, EM waves are squeezed into and propagate in deep sub-wavelength scales. Implementation of an 8.2 GHz cloak less than 1/50 the cloaking diameter was presented using split ring resonator (SRR). Excellent cloaking effect was verified by simulations. Rather than isolating objects from the background, such cloaks can drastically enhance the field intensity around the cloaked object. This is of particular importance in applications such as weak wave detection and near-field sensing.     

Steganography and authentication in image sharing without parity bits

Recently, a polynomial-based (k, n) steganography and authenticated image sharing (SAIS) scheme was proposed to share a secret image into n stego-images. At the same time, one can reconstruct a secret image with any k or more than k stego-images, but one cannot obtain any information about the secret from fewer than k stego-images. The beauty of a (k, n)-SAIS scheme is that it provides the threshold property (i.e., k is the threshold value), the steganography (i.e., stego-images look like cover images), and authentication (i.e., detection of manipulated stego-images). All existing SAIS schemes require parity bits for authentication. In this paper, we present a novel approach without needing parity bits. In addition, our (k, n)-SAIS scheme provides better visual quality and has higher detection ratio with respect to all previous (k, n)-SAIS schemes.     

Modeling and optimization of laser transmission joining process between PET and 316L stainless steel using response surface methodology

Laser joining parameters play a very significant role in determining the quality of laser transmission joining between PET films and 316L stainless steel plates. In the present work, Laser power, joining speed and stand-off-distance were considered as joining parameters. The parameters that influence the quality of laser transmission joining were optimized using response methodology for achieving good joint strength and minimal joint width. The central composite second-order Rotational Design (CCRD) has been utilized to plan the experiments and response surface methodology (RSM) is employed to develop mathematical relationships between joining parameters and desired responses. Based on the developed mathematical models, the interaction effects of the process parameters on laser transmission joining were investigated and optimum joining parameters were achieved. The experimental values nearly agree with the predicted values from mathematical models, indicates that the models can predict the responses adequately and optimize the key process parameters quickly.