Characteristics of Ag/Bi<Subscript>3.25</Subscript>La<Subscript>0.75</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript>/p-Si heterostructure prepared by sol-gel processing

The metal-ferroelectric-semiconductor (MFS) heterostructure has been fabricated using Bi_3.25La_0.75Ti₃O₁₂ (BLT) as a ferroelectric layer by sol-gel processing. The effect of annealing temperature on phase formation and electrical characteristics of Ag/BLT/p-Si heterostructure were investigated. The BLT thin films annealed at from 500°C to 650°C are polycrystalline, with no pyrochlore or other second phases. The C-V curves of Ag/BLT/p-Si heterostructure annealed at 600°C show a clockwise C-V ferroelectric hysteresis loops and obtain good electrical properties with low current density of below 2×10⁻⁸ A/cm² within ±4 V, a memory window of over 0.7 V for a thickness of 400 nm BLT films. The memory window enlarges and the current density reduces with the increase of annealing temperature, but a annealing temperature over 600°C is disadvantageous for good electrical properties.     

钙与 DBC-偶氮氯膦显色反应的研究及其在高纯氧化钇中钙的测定的应用

在PH8.5-9的液中,钙可与DBC-偶氮氯膦形成一种紫色的稳定配合物。该配合物在625nm处有最大吸收,表观摩尔吸光系数为2.6×10~4L.mol~(-1).cm~(-1),配合物组成为Ca:DBC-偶氮氯膦=1:1。在Zn-DTPA和乙二胺的存在下,较大量的Y~(3+)、Fe~(3+)及Cu~(2+)、Mo(Ⅵ)、Cr~(3+)等三十余种离子不干扰钙的测定。方法的选择性较好,利用本方法,并经简单萃取分离基体后,测定了高纯氧化钇和易切削钢中的微量钙,结果令人满意。标准加入试验回收率好。方法简便实用。     

Sorption of Co(II) ong-alumina in the presence and absence of fulvic acid</p> </p>

Summary The removal of heavy metal ion Co(II) from aqueous solution was studied usingg-Al₂O₃ by batch technique. The experiments were performed at T=20±2 °C, in 0.01M NaNO₃ solutions and under aerobic conditions. The effect of pH, ionic strength, fulvic acid (FA) and alumina amount on the sorption of Co(II) on alumina were also investigated. The pH affected the sorption of Co(II) significantly as compared with the effect of FA and ionic strength. The results indicated that strong chemical bonds are formed between Co(II) and functional groups of the bare or FA coated alumina, and a precipitation of Co(II) takes place on the alumina surface, induced by a transition from the adsorption to surface. The addition sequences of Co/FA on Co(II) sorption were also studied: the sorption of Co(II) in the ternary system was found independent of addition sequences.</p> </p>     

Synthesis,structure, and thermal decomposition of a novel one-dimensional chain complex of manganese(II) with 2,2-diphenic acid and 1,10-phenanthroline

A novel one-dimensional (1D) chain coordination polymer [Mn₂(2,2′-dipha)₂(phen)]_n has been synthesized by hydrothermal reaction, and characterized by elemental analysis, IR spectroscopy, TGA, and X-ray diffraction. Orange crystals crystallized in the monoclinic system, space group C2/c with a = 19.393(7) Å, b = 19.183(7) Å, c = 19.729(7) Å, β = 90.826(6)°, V = 7338(5) ų, Z = 8. In the crystal structure, one manganese atom is six-coordinated with four carboxylate oxygen atoms from one pentadentate 2,2′-dipha ligand and two tetradentate 2,2′-dipha ligands, and with two nitrogen atoms of one phen ligand, giving a slightly distorted octahedral geometry. The other manganese atom is five-coordinated with five oxygen atoms from two tetradentate 2,2′-dipha ligands and two pentadentate 2,2′-dipha ligands and has a trigonal bipyramidal environment. The TGA curve shows that the compound is stable below 310°.     

Ru2(ap)4(sigma-oligo(phenyleneethynyl)) molecular wires: synthesis and electronic characterization

Reported in this contribution are the synthesis, characterization, and charge transport properties of wire-like Ru2(ap)4(OPEn), where ap is 2-anilinopyridinate and OPE is -(CCC6H4)nSCH2CH2SiMe3 with n = 1 (1) and 2 (2). Scanning tunneling microscopy (STM) measurements of compound 2 inserted into a SAM of C11 thiol reveal that molecule 2 exhibits (i) the stochastic switching characteristic of wire molecules embedded in insulating SAMs and (ii) higher conductivity than the C11 thiol SAM. More importantly, analysis of the molecular electronic decay constant (beta) exhibits a decrease of at least 15% as compared to purely organic molecular analogues. Hence, the transport characteristics of molecules can be significantly improved for nanoscale electronics through the incorporation of a Ru2 fragment into conjugated backbone.     

3D H-bonding networks self-assembly from pyridinium derivatives and bis(maleonitriledithiolato)zincate(II)

The two ion-pair complexes, [pyH]₂[Zn(mnt)₂] (1) and [4,4′-bipyH₂]-[Zn(mnt)₂] (2), were synthesized, where mnt²⁻ denotes maleonitriledithiolate, and [pyH]⁺, [4,4′-bipyH₂]²⁺ represent pyridinium and diprotonated 4,4′-bipyridinium, respectively. Their single crystal structures show that there are strong bifurcated H-bonding interactions between the cations of the pyridinium derivative and the [Zn(mnt)₂]²⁻ anions in both 1 and 2. The bifurcated H-bonding interactions between the N–H of the pyridiniums and the CN groups of the mnt²⁻ ligands give rise to a 2D layered H-bonding network, the adjacent layers come together in such way as mutual embrace to give a tight pack, thus 2D hydrogen-bonding sheets further develop into 3D H-bonding networks through weak C–HS and ππ stacking interactions in 1. As for 2, the cations and anions connect into several types of H-bonding macrorings ([2+2], [3+3] and [4+4]), these H-bonding macrorings fuse to extend into 2D layered structure, the interpenetration between [3+3] and [4+4] type H-bonding macrorings in the adjacent layers give further rise to novel 3D extended H-bonding networks, in which there are clearly parallel stacks of cations and the chelate rings of anions.     

First principle calculations study of AlN surface terminal structure evolution under different conditions

The surface structure and properties of aluminum nitride (AlN) play an important role in many applications. Using the first principle calculations method, we analyzed the surface terminal structure of AlN and its evolution under different conditions by determining the surface energy, adsorption energy, and evaporation energy of the Al and N terminals on the AlN(0001) surface. Our results show that the reason why the N terminal is less stable than the Al terminal is not only because of its high surface energy but also because its adsorption performance is extremely sensitive to the adsorption position. The surface N atoms combine to form N₂ molecules that escape during the evaporation process at high temperature. After surface N atoms escape, the AlN surface structure reconstitutes to form a hexagonal closest packing (HCP)–like structure, and the energy barrier for the reconstructing process is 3.2 eV. This shows that the structure and form of the AlN(0001) terminals depend on the environmental conditions.     

锆基纤维素手性固定相直接拆分萘普生衍生物

萘普生是一种消炎镇痛药 ,其 S对映体的抗炎作用是 R构型的 2 8倍 ,萘普生及其衍生物的拆分具有重要意义 .手性固定相 HPLC直接拆分 [1～ 4 ] 是最简便的分析方法 .氧化锆是近年来备受关注的色谱载体 [5,6 ] .Carr等 [7] 对碱性药物快速拆分表明氧化锆在手性分离Scheme1　 Structuresof chiral naproxen and its derivatives中的独特选择性 .萘普生及其衍生物在锆基手性固定相上的分离未见文献报道 .本组利用自制的球形氧化锆制备了涂敷型纤维素 -三 ( 3,5 -二甲基苯基氨基甲酸酯 ) -Zr O2 手性固定相 ( CDMPC- Zr O2 - CSP) ,在正…     

Preparation de β-cetonitriles via l'acylation du cyanacetate de trimethylsilyle par les anhydrides mixtes.

β-ketonitriles R¹COCH₂CN and R¹COCH(R²)CN are respectively prepared from (CH₃)₃SiOCOCHLiCN or R²CHLiCN by acylation reaction with mixed anhydrides RCOOCO₂Et.     

HYDROPHOBICITY OF CONTAMINATED SILICONE RUBBER SURFACES

Silicone rubber (SIR) shows superior performance when used outdoors, but its surface can be transformed frominherently hydrophobic to hydrophilic by the adsorption of contaminants. Al(OH)_3, Al_2O_3, quartz powder and active carbonwere selected as authentic contaminants. Hydrophobicity of the surface was determined using contact angle measurement.The results indicate that the adsorbability of the contaminants can strongly affect the hydrophobicity of contaminated SIRsurface. The increasing rate of contact angle of specimens contaminated by Al(OH)_3 was much faster than that by Al_2O_3 andquartz due to the adsorption of migrated low molecular weight (LMW) polydimethylsiloxanes. Specimens contaminated byactive carbon could achieve sunde hydrophobicity within 15 min because active carbon has high adsorbability. Surfaces ofcontaminated ultrapure SIR, polytetrafluoroethylene (PTFE) and glass remain hydrophilic because they contain no mobileLMW components. The addition of oligomeric polydimethylsiloxanes has little effect on the hydrophobicity of contaminantscovered on SIR surface.