Designing and Characterization of Biodegradable Multiblock Poly(L-Lactic Acid)/Polybutadiene Elastomers

A series of poly(L-lactic acid)/polybutadiene (PLA/PB) biodegradable multiblock elastomers was synthesized and characterized. A two-step process to prepare PLA/PB multiblock elastomers was applied. Melt polymerization was used to prepare poly(L-lactic acid) (PLA) terminated with hydroxyl groups and, at the same time, hydroxyl-terminated polybutadiene (HTPB) and 1,6-hexamethylene diisocyanate (HDI) were employed to synthesize diisocyanate-terminated polybutadiene (ITPB). Then, PLA and ITPB were reacted with different PLA/PB weight ratios. Consequently, a series of PLA/PB biodegradable poly(ester-urethane)s with crosslinked chains was obtained. Swelling characteristics and crosslink density of the crosslinked elastomer were investigated. DMA was applied to characterize its thermal properties. The measurement of mechanical properties showed that a PLA/PB elastomer with adjustable mechanical properties was synthesized. Micromorphology, hydrophobicity, and degradability of the material were also characterized.     

Binding numbers for fractional ID-k-factor-critical graphs

LetG be a graph,and k≥2 be a positive integer.A graph G is fractional independentset-deletable k-factor-critical(in short,fractional ID-k-factor-critical),if G I has a fractional k-factor for every independent set I of G.The binding number bind(G)of a graph G is defined as bind(G)=min|NG(X)||X|:=X V(G),NG(X)=V(G).In this paper,it is proved that a graph G is fractional ID-k-factor-critical if n≥6k 9 and bind(G)(3k 1)(n 1)kn 2k+2.     

Structural and functional stabilities of artificially designed DNA ultra-thin films grown by silica Assistance

We report the structural and functional stabilities of artificially synthesized DNA ultra-thin films. Fully covered DNA ultra-thin films on a silica substrate were fabricated by the silica-assisted growth method and those samples were then incubated in various chemicals and physical conditions. The DNA ultra-thin films showed high maintainability under those harsh conditions and these results would aid to facilitate the use of artificial DNA ultra-thin films in advanced research areas such as biophotonics and bioelectronics.     

Average capacity for non-Kolmogorov turbulent slant optical links with beam wander corrected and pointing errors

The effects of beam wander corrected and pointing errors on the average capacity of a non-Kolmogorov turbulent atmosphere communication channel are studied. The gamma–gamma irradiance probability density function model has been considered to include the effects of non-Kolmogorov turbulence. An expression for the average capacity under beam wander corrected, pointing errors and the spectral index of refractive-index fluctuation. Simulation results for effects of circular detection aperture of radius, atmosphere turbulence strength and wavelength on average capacity are presented. Our results show that the average capacity has an oscillation in the case of short propagation distance, but in the case of long propagation distance, it has gradually reduced curves. And the turbulence strength has a strong influence on average capacity. In general, turbulence reduces the average capacity; it can reduce average capacity by increasing of the power law α. We can ignore the little effects of wavelength increases on the average capacity.     

Comment on: “Topology identification and adaptive synchronization of uncertain complex networks with adaptive double scaling functions” [Commun Nonlinear Sci Numer Simul 2011;16:3337-43]

In this comment letter we point out that the main result of the recent paper [Xu Y, Zhou W, Fang J, Sun W. Topology identification and adaptive synchronization of uncertain complex networks with adaptive double scaling functions. Commun Nonlinear Sci Numer Simul 2011;16(18):3337-43] has certain errors. The mistakes are corrected and a correct version is presented in this letter. We further indicate that a sufficient condition has been neglected in a series of articles discussing the same topic of network topology identification; hence we hope this letter can help clarify some unclear concepts about this topic.     

Discovery of a new nontoxic cuprate superconducting system Ga-Ba-Ca-Cu-O

Superconductivity is observed in a new nontoxic cuprate system Ga-Ba-Ca-Cu-O,with T_c=82 K for Ga Ba_2Ca_5Cu_6O_(14+δ)(Ga-1256)and T_c=116 K probably for Ga Ba_2Ca_3Cu_4O_(10+δ)(Ga-1234)or Ga Ba_2Ca_2Cu_3O_(8+δ)(Ga-1223),respectively.All compounds are fabricated by solid state reaction method under high pressure and high temperature.Samples are characterized by resistivity,magnetization and X-ray diffraction(XRD)measurements.The temperature dependence of magnetization measured in both zero-field-cooled and field-cooled processes on one sample(S1)shows two superconducting transitions at about 82 K and113 K.The estimated shielding fraction for the phase with T_cof 82 K is about 67%,while the fraction for another phase with T_(c )of 113 K is quite small.The XRD Rietveld refinement for S1 indicates two main phases existing in the sample,Ga-1256 with fraction of about 58%and non-superconducting Ca_(0.85)Cu O_2with fraction of about 42%respectively.Thus,we can conclude the superconducting phase with transition temperature of 82 K is due to Ga-1256.The resistivity measurement also confirms the superconductivity for S1,and the resistivity reaches zero at about 82 K.The temperature dependence of magnetization for another sample(S2)shows much higher superconducting shielding fraction for the phase with T_cof 116 K,which may be a promising prospective for the synthesis of Ga-1234 or Ga-1223 phase.     

Pressure controllable phase transition in MoTe2 by the interlayer band occupancy

High pressure can effectively control the phase transition of MoTe₂ in experiment, but the mechanism is still unclear. In this work, we show by first-principles calculations that the phase transition is suppressed and $1T^{\prime }$ phase becomes more stable under high pressure, which originates from the pressure-induced change of the interlayer band occupancies near the Fermi energy. Specifically, the interlayer states of $1T^{\prime }$ phase tend to be fully occupied under high pressure, while they keep partially occupied for the $T_d$ phase. The increase of the band occupancies makes the $1T^{\prime }$ phase more favorable in energy and prevents the structure changing from $1T^{\prime }$ to $T_d$ phase. Moreover, we also analyze the superconductivity under high pressure based on BCS theory by calculating the density of states and phonon spectra. Our results may shed some light on understanding the relationship between the interlayer band occupancy and crystal stability of MoTe₂ under high pressures.     

Bioactive Chemical Constituents of Cercis chinensis

Chemistry of Natural Compounds -     

Modeling the Effect of Injection Molding Process Parameters on Warpage Using Neural Network Theory

A back propagation artificial neural network (BPANN) prediction model for warpage of injection-molded polypropylene was developed based on an orthogonal design method. The BPANN model was trained by the input and output data obtained from the moldflow software platform simulations. It is proved that the BPANN model can predict the warpage with reasonable accuracy. Utilizing the BPANN model, the effects of the process parameters, packing pressure (Pp), melt temperature (T_me), mold temperature (T_mo), packing time (t_p), cooling time (t_c), and fill pressure (p_f), on the warpage were investigated. The most important process parameter affecting the warpage was Pp, and the second most important was T_me. The rest of the process parameters, T_mo, t_p, t_c, and p_f, were found to be relatively less influential. Warpage increased with elevating T_mo. In contrast, an increase in Pp and T_me caused the warpage to decrease.