Programmable Engineering of a Biosensing Interface with Tetrahedral DNA Nanostructures for Ultrasensitive DNA Detection

Self‐assembled DNA nanostructures with precise sizes allow a programmable “soft lithography” approach to engineer the interface of electrochemical DNA sensors. By using millimeter‐sized gold electrodes modified with several types of tetrahedral DNA nanostructures (TDNs) of different sizes, both the kinetics and thermodynamics of DNA hybridization were profoundly affected. Because each DNA probe is anchored on an individual TDN, its lateral spacing and interactions are finely tuned by the TDN size. By simply varying the size of the TDNs, the hybridization time was decreased and the hybridization efficiency was increased. More significantly, the detection limit for DNA detection was tuned over four orders of magnitude with differentially nanostructured electrodes, and achieved attomolar sensitivity with polymeric enzyme amplification.     

One Step Preparation of Reduced Graphene Oxide/Pd–Fe3O4@Polypyrrole Composites and Their Application in Catalysis

The simple preparation of catalysts with superior catalytic activity and good reusability is highly desirable. Herein, we report a novel strategy to construct reduced graphene oxide (rGO)/Pd–Fe₃O₄@polypyrrole (PPy) catalysts with Pd and Fe₃O₄ nanoparticles anchored on a rGO nanosheet surface and wrapped in a PPy shell. The synthesis and assembly of both the Pd and Fe₃O₄ nanoparticles, the preparation of the PPy layer, and the reduction of graphene oxide nanosheets were finished in one step. In the system, the PPy layer not only prevented aggregation of Pd and Fe₃O₄ nanoparticles, but also generated a synergistic effect with precursor Pd²⁺ ions, which led to a high dispersity of as‐prepared Pd nanoparticles. Although the procedure was simplified to one step, the catalytic activity and reusability were not sacrificed. In the reduction of 4‐nitrophenol, their catalytic performance was better than that in recent reports. Moreover, the catalysts showed good reusability owing to their magnetic properties.     

Asymmetric Total Synthesis of (−)‐Kravanhin B

The first asymmetric total synthesis of kravanhin B has been accomplished with a linear reaction sequence of 13 steps starting from (R)‐(?)‐carvone. The synthesis features an intramolecular aldol cyclization to construct the desired cis‐fused decalin skeleton and an acid‐catalyzed dehydration and olefin isomerization to install the γ‐butenolide ring.     

Surfactant-Free and Controlled Synthesis of Hexagonal CeVO4 Nanoplates: Photocatalytic Activity and Superhydrophobic Property

Nanomaterials with both superhydrophobic surface properties as well as photocatalytic activities could have important industrial applications. Herein, we synthesized CeVO₄ nanocrystals with hexagonal nanoplate structures from the reaction of decavanadate (K₆V₁₀O₂₈⋅9 H₂O) and CeCl₃⋅H₂O precursors via a hydrothermal method. This synthetic route has four advantages: 1) the reaction condition is relatively mild, 2) it doesn′t need surfactants or templates, 3) it requires no expensive equipment, and 4) products are of higher purity. During synthesis, solution pH, and reaction temperature were found to play important roles in determining the growth process and final morphologies of the CeVO₄ products. These products were characterized spectrophotometrically and via scanning and transmission electron microscopy. Furthermore, the wettability of the as-synthesized film CeVO₄ nanoplates was studied by measuring water contact angle (CA). The largest CA measured was at 169.5 ° for a glass substrate treated with 0.06 g mL⁻¹ CeVO₄ followed by 2 % 1 H, 1 H, 2 H, 2 H-perfluorodecyltriethoxysilane. Finally, the CeVO₄ nanoplates exhibited excellent photocatalytic activity in degradation of rhodamine B (RhB) under UV irradiation and was stable even after repeated cycles of use.     

Four Metal Complexes Based on Bulky Imidazole Ligands: Solvothermal Syntheses,Crystal Structures,and Fluorescence Properties

In order to explore the influences of (de‐)protonation of the imidazole ring on the structural diversity of the resulting complexes, the imidazole‐based ligands 4, 5‐diphenylimidazole (Hdpi) and 1H‐phenanthro[9, 10‐d]imidazole (Hpi) were utilized as bulky building blocks to construct four complexes by solvothermal reactions, i.e. [Ag(Hdpi)₂](NO₃) · (H₂O) ( 1 ), [Cu(dpi)]_∞ ( 2 ), [Cu(Hpi)(NO₃)]_∞ ( 3 ), and [(H₂pi)(NO₃)] · H₂O ( 4 ). In complex 1 , two Hdpi ligands adopt a monodentate pattern and coordinate with one Ag^I ion to form a mononuclear unit, which is further connected by hydrogen bonds into a 1D supramolecular helix. The deprotonated dpi ligand of 2 acts in bidentate mode, and bridges Cu^I ions to afford a 1D chain. In 3 , the NO₃^– ion, acts as a monodentate bridging ligand and joins Cu^I ions to generate a 1D chain. The Hpi ligand employs a monodentate mode to bond with Cu^I ions of the 1D chain. 4 is protonated and two H₂pi nitrogen atoms are free of coordination. Interestingly, hydrogen bonds among the NO₃^– ion, the H₂pi ligand, and the water molecule yield a macro ring R⁴₄(14). The resulting structural diversity reveals that the (de‐)protonation of imidazole ring directly steers the coordination number of ligand, and thus causes a significant effect on the structure, especially the dimensionality. Furthermore, the solid‐state fluorescence properties of the free ligands and compounds 1 – 4 were studied at room temperature.     

Surface-enhanced Raman spectroscopy based on conical holed enhancing substrates

In this contribution, surface-enhanced Raman spectroscopy (SERS) based on conical holed glass substrates deposited with silver colloids was reported for the first time. It combines the advantages of both dry SERS assays based on plane films deposited with silver colloids and wet SERS assays utilizing cuvettes or capillary tubes. Compared with plane glass substrates deposited with silver colloids, the conical holed glass substrates deposited with silver colloids exhibited five-to ten-folds of increase in the rate of signal enhancement, due to the internal multiple reflections of both the excitation laser beam and the Raman scattering photons within conical holes. The application of conical holed glass substrates could also yield significantly stronger and more reproducible SERS signals than SERS assays utilizing capillary tubes to sample the mixture of silver colloids and the solution of the analyte of interest. The conical holed glass substrates in combination with the multiplicative effects model for surface-enhanced Raman spectroscopy (MEM_SERS) achieved quite sensitive and precise quantification of 6-mercaptopurine in complex plasma samples with an average relative prediction error of about 4% and a limit of detection of about 0.02 μM using a portable i-Raman 785H spectrometer. It is reasonable to expect that SERS technique based on conical holed enhancing substrates in combination with MEM_SERS model can be developed and extended to other application areas such as drug detection, environmental monitoring, and clinic analysis, etc.     

A DFT study of DMC formation on Rh‐doped Cu/AC surfaces

The activity and selectivity of heterogeneous catalysts can be significantly improved by dispersion of another active component in the metal substrate. The impact of Rh promoter on the formation of dimethyl carbonate (DMC) via oxidative carbonylation of methanol on Cu–Rh/AC (activated carbon) catalyst was investigated by density functional theory calculations. The most stable configurations of reacting species (CO, OH, CH₃O, monomethyl carbonate, and DMC) adsorbed on the Cu⁰(zero‐valent copper)/AC and Cu–Rh/AC surfaces were determined on the basis of the calculated results. The reaction energy and activation energy of the rate‐limiting steps on the Cu–Rh/AC and Cu⁰/AC surfaces were compared. The activation energies of the rate‐limiting step of CO insertion into dimethoxide are 206.3 and 304.8 kJ mol^?1 on the Cu–Rh/AC and Cu⁰/AC surfaces, respectively. The activation energies of the rate‐limiting step of CO insertion into methoxide are 78.5 and 92.7 kJ/mol on the Cu–Rh/AC and Cu⁰/AC surfaces, respectively. The calculated results indicate that the addition of Rh atom has a significant effect on decreasing the active energy the main pathway for DMC formation. © 2015 Wiley Periodicals, Inc.     

From Polymer to Monomer: Cleavage and Rearrangement of Si‐O‐Si Bonds after Oxidation Yielded an Ordered Cyclic Crystallized Structure

Polymerization reactions are very common in the chemical industry, however, the reaction in which monomers are obtained from polymers is rarely invesitgated. This work reveals for the first time that oxone can break the Si‐O‐Si bond and induce further rearrangement to yield an ordered cyclic structure. The oxidation of P1 , which is obtained by reaction of 2,2′‐1,2‐ethanediylbis(oxy)bis(ethanethiol) (DBOET) with 1,3‐divinyl‐1,1,3,3‐tetramethyldisiloxane (MM^Vi), with oxone yielded cyclic crystallized sulfone–siloxane dimer ( P1‐ox ) after unexpected cleavage and rearrangement of the Si‐O‐Si bond.     

Clean Synthesis of an Economical 3D Nanochain Network of PdCu Alloy with Enhanced Electrocatalytic Performance towards Ethanol Oxidation

A one‐pot method for the fast synthesis of a 3D nanochain network (NNC) of PdCu alloy without any surfactants is described. The composition of the as‐prepared PdCu alloy catalysts can be precisely controlled by changing the precursor ratio of Pd to Cu. First, the Cu content changes the electronic structure of Pd in the 3D NNC of PdCu alloy. Second, the 3D network structure offers large open pores, high surface areas, and self‐supported properties. Third, the surfactant‐free strategy results in a relatively clean surface. These factors all contribute to better electrocatalytic activity and durability towards ethanol oxidation. Moreover, the use of copper in the alloy lowers the price of the catalyst by replacing the noble metal palladium with non‐noble metal copper. The composition‐optimized Pd₈₀Cu₂₀ alloy in the 3D NNC catalyst shows an increased electrochemically active surface area (80.95 m² g^?1) and a 3.62‐fold enhancement of mass activity (6.16 A mg^?1) over a commercial Pd/C catalyst.