From molecule to bulk material: optical properties of hydrogen-bonded dimers [C12H12N4O2AgPF6]2 and [C28H28N6O3AgPF6]2 depend on the arrangement of the oxime moieties

The dependence of the optical properties of [C(12)H(12)N(4)O(2)AgPF(6)](2) (dimer-1) and [C(28)H(28)N(6)O(3)AgPF(6)](2) (dimer-2) on the arrangement of the oxime moieties in the molecule and in bulk crystals was investigated by means of time-dependent density functional theory. Dimer-1 with simple pyridine oxime ligands and a wavy arrangement has a smaller dipole moment and larger transition energy between the two states, and thus smaller third-order polarizabilities and two-photon absorption cross sections. Dimer-2 with extended pyridine oxime ligands and a ladder arrangement has a larger dipole moment and smaller transition energy between the two states, and thus larger third-order polarizabilities and two-photon absorption cross sections. The lowest energy absorption band is red-shifted for dimer-2 as compared with dimer-1, due to more pronounced pi-pi delocalization interactions and weaker hydrogen bonding in dimer-2. The electronic absorption spectra, frequency-dependent third-order polarizabilities, and two-photon absorption cross sections involve significant contributions from charge transfers from pi/pi* orbitals of the pyridine oxime ligands but no contribution from PF(6) (-) ions or H(2)O molecules in the wavelength range studied for the monomers and dimers of the C(12)H(12)N(4)O(2)AgPF(6) and C(28)H(28)N(6)O(3)AgPF(6) molecules. The third-order susceptibilities and two-photon absorption coefficients of bulk solids were estimated on the basis of the optical properties of the corresponding dimers, and the bulk material constructed from dimer-2 has the larger optical parameters of the two.     

Determination of free and protein-bound glutathione in HepG2 cells using capillary electrophoresis with laser-induced fluorescence detection

A rapid method using capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) was developed to determine free and protein-bound glutathione (GSH) in human HepG2 hepatocarcinoma cells. The samples were derivatized with 5-iodoacetamidofluorescein (5-IAF), and analyzed at 22 kV using sodium phosphate buffer (10mM, pH 11.4) and an uncoated 58 cm x 75 microm I.D. fused silica capillary. The analysis time was less than 10 min and N-acetylcysteine was used as internal standard. The derivatization conditions, such as reaction time, 5-IAF concentration, running buffer and cartridge temperature were optimized. Argon gas was used in the study to prevent the oxidization of GSH during sample preparation. The optimized method required only 30-40 nl sample per analysis and was fast and sensitive. The method was applied to the analyses of HepG2 cells treated with the small metal chelating agent, pyrrolidine dithiocarbamate (PDTC). The results demonstrate that the amount of protein-bound GSH, which reflects the amount of protein S-glutathionylation, increased in a time-dependent manner upon cell treatment with PDTC, reaching a maximum of over 50% increase 2h post-PDTC.     

Exploring the interstitial atom in the FeMo cofactor of nitrogenase: insights from QM and QM/MM calculations

Density functional theory and combined quantum mechanics and molecular mechanics (QM/MM) calculations have been used to explore structural features of the FeMo cofactor with an interstitial atom X (X = N, C, or O) and its interactions with CO and N 2. Predicted frequencies of the metal-bound CO, QM/MM-optimized geometries, and calculated redox potentials of the FeMo cofactor with different central ligands show that the oxygen atom is the candidate for the interstitial atom. Calculations on the interactions of the FeMo cofactor with CO and N 2 reveal that there is a remarkable dependence of the binding energy on the binding site and the interstitial atom. Generally, the Fe2 site of the FeMo cofactor has stronger interactions with CO and N 2 than Fe6, and both the Fe2 and Fe6 sites in the N-centered and O-centered clusters of the FeMo cofactor can effectively bind N 2 while the coordination of N 2 to the Fe6 site of the C-centered active cluster is unfavorable energetically. Present results indicate that the protein environment is important for computational characterization of the structure of the FeMo cofactor and properties of the metal-bound CO and N 2 are sensitive to the interstitial atom.     

Preparation of bupleurum nasal spray and evaluation on its safety and efficacy

Radix Bupleuri is widely used in traditional medicine for the treatment of fever, pain, and inflammation associated with influenza or the common cold. The essential oil extracted from the herb is generally claimed to play the major role in the efficacious treatment of fever. The purpose of the present study was to formulate an intranasal delivery system for the essential oil in an aqueous solution used in the form of nasal spray. From 450 g Radix Bupleuri was extracted the essential oil in the amount of about 0.2 ml, which was slightly water-soluble and viscous with low-fluidity. In order to dissolve the essential oil evenly in the aqueous solution, tween-80 (TW-80, used in 10% (w/v) solution), propylene glycol (PG) and diethylene glycol monoethyl ether (TC) were selected as the favorable solubilizing agents, whose amount was respectively determined by L16(4(5)) orthogonal design. An aqueous solution with clarity and no ciliotoxicity was prepared when TW-80 8% (v/v), PG 14.4% (v/v) and TC 14.4% (v/v) were added. Employed to evaluate the acute toxicity, the rats grew well and were kept active and healthy within 14 d after an intranasal administration of this preparation at the dose of oil from 10 g Bupleuri/kg (50-fold higher than the clinical dose), indicating that there would be no serious toxicity at the normal dose. Intranasal administration of this preparation to 2 kg rabbits with fever induced by subcutaneous injection of turpentine decreased body temperature markedly (0.5, 0.8 and 1.0 degrees C respectively at the dose of oil from 1, 2 and 4 g Bupleuri/body). In addition, the administration significantly reduced fever in 200 g rats induced by intramuscular injection of colicine suspension (0.6 degrees C at the dose of oil from 0.8 g Bupleuri/body). The results suggest that the formulation of nasal spray for the essential oil from Radix Bupleuri can be potentially effective in the treatment of fever.     

De novo synthesis of sugar-aza-crown ethers via a domino Staudinger aza-Wittig reaction

A short and highly efficient route to sugar-aza-crown (SAC) ethers has been developed. The key step of the transformation is a one-pot cyclodimerization of C-glycosyl azido aldehydes via a domino Staudinger aza-Wittig reaction. This process allows the preparation of various orthogonally protected SAC ethers, from both alpha- and beta-C-glycosyl azido aldehydes.     

A global ab initio potential energy surface for HNO (a3A") and quantum mechanical studies of vibrational states and reaction dynamics

A new global potential energy surface for the lowest triplet electronic state (a(3)A") of HNO has been developed by a three-dimensional cubic spline interpolation of more than 13,000 ab initio points, which were calculated at the multireference configuration interaction level with Davidson correction using the augmented correlation-consistent polarized valence quintuple zeta basis set. Two minima and five saddle points were found on the potential energy surface. Low-lying vibrational states were obtained in this new potential using the Lanczos method and assigned. In addition, thermal rate constants for the N + OH → H + NO reactions were obtained using an exact wave packet method. Reasonably good agreement with experimental data was obtained.     

Mononuclear and binuclear rhenium carbonyl nitrosyls: comparison with their manganese analogues

The structures and energetics of Re(NO)(CO)n (n = 5, 4, 3, 2) and Re2(NO)2(CO)n (n = 7, 6) have been investigated using density functional theory. For Re(NO)(CO)4 the preferred structure is an equatorially substituted trigonal bipyramid analogous to the known structure of the manganese analogue. The lowest energy structures for the unsaturated Re(NO)(CO)n (n = 3, 2) species can be derived from this structure by removal of carbonyl groups. A structure is found for Re(NO)(CO)5 in which the NO ligand has attached to one of the CO ligands by forming a C-N bond to give an unprecedented eta(2)-OCNO ligand. However, this structure is predicted to undergo exothermic CO loss to give Re(NO)(CO)4. The preferred structures for the binuclear derivatives Re2(NO)2(CO)n (n = 7, 6) are structures unprecedented for the manganese analogues and consist of a Re(CO)5 unit linked to a Re(NO)2(CO)(n-5) unit. However, only slightly higher in energy are structures of the type Re2(mu-NO)2(CO)n with two bridging nitrosyl groups, similar to the global minima for the manganese analogues. These results predict extensive areas of new rhenium carbonyl nitrosyl chemistry. Thus the synthesis of Re(NO)(CO)4 by methods related to the synthesis of the manganese analogue appears to be feasible. In addition, the existence of an extensive series of Re(NO)2(CO)2X derivatives, as well as a Re2(NO)4(CO)4 dimer, is predicted.     

Experimental and density functional theory and ab initio Hartree-Fock study on the vibrational spectra of 2-(4-fluorobenzylideneamino)-3-mercaptopropanoic acid

2-(4-Fluorobenzylideneamino)-3-mercaptopropanoic acid (4-FC) was synthesized through the reaction of 4-fluorobenzaldehyde and l-cysteine in refluxing EtOH. Its structure was verified by (1)H NMR, FT-IR and Raman. The ground-state geometries were optimized at B3LYP/6-31G**, B3LYP/6-31G*, HF/6-31G** and HF/6-31G* levels without symmetry constrains, respectively. The vibrational wavenumbers of 4-FC were calculated at same level. The scaled theoretical spectra using B3LYP methods, which are in a good agreement with the experimental ones, are superior to those using HF methods.     

Preparation of well-defined core-shell particles by Cu2+-mediated graft copolymerization of methyl methacrylate from bovine serum albumin

Small well-defined core-shell poly(methyl methacrylate)-bovine serum albumin (PMMA-BSA) particles have been prepared in a direct one-step graft copolymerization of MMA from BSA at 75 degrees C in water with a trace amount of Cu2+ (5 microM). Initially, BSA generates free radicals and acts as a multifunctional macroinitiator, which leads to the formation of an amphiphilic PMMA-BSA grafting copolymer. Such formed copolymer chains act as a polymeric stabilizer to promote further emulsion polymerization of MMA inside, resulting in surfactant-free stable core-shell particles, confirmed by a transmission electron microscopic (TEM) analysis. The PMMA-BSA copolymers as well as PMMA homopolymer inside the particles were isolated by Soxhlet extraction and characterized by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetry (TG). The highest grafting efficiency was approximately 80%. Effects of the reaction temperature, the MMA/BSA ratio, and the concentrations of Cu2+ and BSA on such core-shell particle formation have been systematically studied. Due to their inert PMMA core and biocompatible BSA shell, these small polymer particles are potentially useful in biomedical applications.     

pH controlled release of chromone from chromone-Fe3O4 nanoparticles

We report a new strategy for coupling chromone to Fe3O4 nanoparticles. The chromone-Fe3O4 NP conjugate shows a dramatic increase in chromone solubility in cell culture medium from less than 2.5 to 633 microg/ml, leading to the enhanced chromone uptake by HeLa cells. Chromone can be released at low pH and as a result, the chromone-Fe3O4 conjugate is much more efficient in inhibiting the HeLa cell proliferation. Such chromone-Fe3O4 NPs are promising as a powerful multifunctional delivery system for both chromone-based diagnostic and therapeutic applications.