槲皮素-3-O-丙基衍生物的合成及生物活性研究

槲皮素是具有丰富生物活性的黄酮类化合物,药理活性显著。本文以槲皮素为先导物,选择性对C环3位羟基进行修饰,以廉价的芦丁为原料,经苄基保护、Williamson成醚反应,再经Pd/C催化加氢脱苄基得到28个未见文献报道的槲皮素-3-O-丙基衍生物,其结构经¹H NMR、¹³C NMR、ESI-MS进行确证。采用MTT法考察了所合成化合物对人食管鳞癌（EC109）、人胃癌（HGC27）、人乳腺癌（MCF-7）、小鼠黑色素瘤（B16-F10）的增殖抑制作用。结果显示,通过化学方法对槲皮素结构进行修饰后,其体外抗肿瘤活性增强。其中,化合物F3(IC₅₀=5.23±0.37μmol/L)、F5(IC₅₀=2.63±0.09μmol/L)对小鼠黑色素瘤（B16-F10）抑制作用比5-氟尿嘧啶(IC₅₀=14.38±0.27μmol/L)好,值得进一步研究。     

Mixing of Racemic Poly(L-lactide)/Poly(D-lactide) Blend with Miscible Poly(D,L-lactide):Toward All Stereocomplex-type Polylactide with Strikingly Enhanced SC Crystallizability

Stereocomplex-type polylactide (SC-PLA) consisting of alternatively arranged poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) chains has gained a good reputation as a sustainable engineering plastic with outstanding heat resistance and durability,however its practical applications have been considerably hindered by the weak SC crystallizability.Current methods used to enhance the SC crystallizability are generally achieved at the expense of the precious bio-renewability and/or bio-degradability of PLAs.Herein,we demonstrate a feasible method to address these challenges by incorporating small amounts of poly(D,L-lactide) (PDLLA) into linear high-molecular-weight PLLA/PDLA blends.The results show that the incorporation of the atactic PDLLA leads to a significant enhancement in the SC crystallizability because its good miscibility with the isotactic PLAs makes it possible to greatly improve the chain mixing between PLLA and PDLA as an effective compatibilizer.Meanwhile,the melt stability (i.e.,the stability of PLLA/PDLA chain assemblies upon melting) could also be improved substantially.Very intriguingly,SC crystallites are predominantly formed with increasing content and molecular weight of PDLLA.More notably,exclusive SC crystallization can be obtained in the racemic blends with 20 wt％ PDLLA having weight-average molecular weight of above 1 ×10s g/mol,where the chain mixing level and intermolecular interactions between the PLA enantiomers could be strikingly enhanced.Overall,our work could not only open a promising horizon for the development of all SC-PLA-based engineering plastic with exceptional SC crystallizability but also give a fundamental insight into the crucial role of PDLLA in improving the SC crystallizability of PLLA/PDLA blends.     

MnO2‐Modified Persistent Luminescence Nanoparticles for Detection and Imaging of Glutathione in Living Cells and In Vivo

Persistent luminescence nanoparticles (PLNPs) hold great promise for the detection and imaging of biomolecules. Herein, we have demonstrated a novel nanoprobe, based on the manganese dioxide (MnO₂)‐modified PLNPs, that can detect and image glutathione in living cells and in vivo. The persistent luminescence of the PLNPs can be efficiently quenched by the MnO₂ nanosheets. In the presence of glutathione (GSH), MnO₂ was reduced to Mn²⁺ and the luminescence of PLNPs can be restored. The persistent luminescence property can allow detection and imaging without external excitation and avoid the background noise originating from the in situ excitation. This strategy can offer a promising platform for detection and imaging of reactive species in living cells or in vivo.     

Cross-Linked Polyphosphazene Hollow Nanosphere-Derived N/P-Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom-doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template-free approach to construct cross-linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P-doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g⁻¹). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co-N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom-containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Super‐ and Ferroelastic Organic Semiconductors for Ultraflexible Single‐Crystal Electronics

Like silicon, single crystals of organic semiconductors are pursued to attain intrinsic charge transport properties. However, they are intolerant to mechanical deformation, impeding their application in flexible electronic devices. Such contradictory properties, namely exceptional molecular ordering and mechanical flexibility, are unified in this work. We found that bis(triisopropylsilylethynyl)pentacene (TIPS‐P) crystals can undergo mechanically induced structural transitions to exhibit superelasticity and ferroelasticity. These properties arise from cooperative and correlated molecular displacements and rotations in response to mechanical stress. By utilizing a bending‐induced ferroelastic transition of TIPS‐P, flexible single‐crystal electronic devices were obtained that can tolerate strains (?) of more than 13 % while maintaining the charge carrier mobility of unstrained crystals (μ>0.7 μ₀). Our work will pave the way for high‐performance ultraflexible single‐crystal organic electronics for sensors, memories, and robotic applications.     

Experimental Study on Wave Characteristics of Stilling Basin with a Negative Step

Stilling basin with a negative step is an important structure in hydraulic systems, because it can avoid atomization and decrease scouring problems. Although stilling basins with a negative step have attracted much attention from researchers, few researchers have focused on the wave characteristics. In this research, an experimental study on the wave characteristics of stilling basins with a negative step was carried out. The wave height, average period, wave probability density and power spectrum along the flow direction of different stilling basins with a negative step were described based on the wave theory, and the results indicate discharge and step height have a significant effect on the wave characteristics. The relationships between the different characteristic wave heights, and the empirical formula for the relative characteristic wave height are obtained. Finally, the dimensionless standard deviation at the end of the stilling basin with a negative step is linearly related to the flow-energy ratio and the relative step height under B-jump.     

热处理对WO3纳米薄膜结构及其气致变色性能的影响

以钨粉和过氧化氢溶液为原料, 采用溶胶凝胶法制备了WO3溶胶, 并结合提拉镀膜法, 分别在普通玻璃载玻片和抛光硅片上制备了掺钯气致变色WO3纳米结构薄膜; 并分别在50, 150, 250, 350和450 ℃的空气氛围中对薄膜进行了热处理. 采用IR、双椭圆偏振光谱仪、AFM和XRD分析了薄膜的性质和微观结构, 观察了薄膜的表面形貌, 根据所得数据讨论了不同热处理温度对薄膜的结构和气致变色性能的影响.     

热解吸-气相色谱法测定植物源挥发性有机物

以Tenax-TA、Carboxen 1000和Carbosieve SⅢ为采样管填充料,将植物源挥发性有机物吸附于采样管内,样品通过二次热解吸仪解吸后,随载气进入气相色谱仪,采用氢火焰离子化检测器(FID)测定,建立了利用二次热解吸仪与气相色谱联用技术测定植物挥发性有机物的分析方法。载气N2流速为30 mL/min,60℃下吹扫吸附管2 min,然后在250℃下解吸吸附管5 min,冷却1 min后,在275℃下解吸聚焦管3 min,样品经传输线进入气相色谱。气相色谱载气N2压力为190 kPa,FID检测器温度280℃;进样口温度225℃;初始柱温40℃,停留5 min,以2℃/min升温至120℃,保留1 min,然后以20℃/min升温至200℃,保留10 min。方法重现性好,精密度高,线性相关系数大于0.99;检出限均低于9×10-9g/L;解吸效率大于96%,适用于植物源挥发性有机物的测定。     

Rapid determination of anilines in water samples by dispersive liquid-liquid microextraction based on solidification of floating organic drop prior to gas chromatography-mass spectrometry

A rapid, sensitive and environmentally friendly method for the analysis of 14 anilines in water samples by dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME-SFO) prior to gas chromatography–mass spectrometry (GC-MS) was developed and optimized. In the proposed method, cyclohexane was used as the extraction solvent as its toxicity was much lower than that of the solvent usually used in dispersive liquid–liquid microextraction (DLLME). In the optimized conditions, the method exhibited good analytical performance. Based on a signal-to-noise ratio of 3, limits of detection for anilines were in the range of 0.07 to 0.29 μg L⁻¹, and the linear range was 0.5–200 μg L⁻¹ with regression coefficients (r ²) higher than 0.9977. It was efficient for qualitative and quantitative analysis of anilines in water samples. The relative standard deviations varied from 2.9 to 8.6 % depending on different compounds indicating good precision. Tap water and river water were selected for evaluating the application to real water samples. The relative recoveries of anilines for the two real samples spiked with 10 μg L⁻¹ anilines were in the scope of 78.2–114.6 % and 77.3–115.6 %, respectively.     

Synthesis, crystal structures and characterization of four coordination polymers based on 5-amino-2,4,6-triiodoisophthalic acid

One homochiral 1D coordination polymer [Cu(ATIBDC)(2,2′-bipy)]·3H₂O·CH₃OH (1) and three achiral 1D coordination polymers: [Cd(ATIBDC)(2,2′-bipy)(H₂O)]·3H₂O (2), [Cd(ATIBDC)(phen)(H₂O)]·4H₂O (3), and [Mn(ATIBDC)(phen)₂]·5H₂O (4) have been synthesized and characterized (H₂ATIBDC=5-amino-2,4,6-triiodoisophthalic acid, 2,2′-bipy=2,2′-bipyridine, and phen=1,10-phenanthroline). Extended high dimensional network architectures are further constructed with the help of weak secondary interactions, such as hydrogen bonding, aromatic stacking, and halogen bonding (C-I…π and C-I…N/O). Complex 1 crystallizes in the monoclinic system with chiral space group P2(1) and exhibits a right-handed 2₁ helical chain structure. The homochirality of 1 was confirmed by CD spectrum. Interestingly, two new configurations of decameric water cluster are found in 3 and 4. The acyclic tetrameric cluster (H₂O)₃(CH₃OH) in 1 and (H₂O)₄ in 2 array into highly ordered helical infinite chains. Thermal stabilities of all the complexes have been studied. Solid state fluorescent properties of the Cd(II) complexes have been explored.