2,2′-对苯二甲硫基二乙酸配合物的合成及表征

本文报道了配体 2 ,2′-对苯二甲硫基二乙酸和过渡金属铜 ( )、钴 ( )、镍 ( )配合物的合成。经元素分析、X射线衍射分析、红外光谱、差热 -热重分析等推算了它们的组成并指认了谱带的归属。对铜 ( )配合物进行了电子顺磁共振谱研究。     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

含柔性间隔基的热致液晶性共聚酯的结晶形态

采用偏光显微镜、扫描和透射电镜从不同层次的结构水平上研究了含柔性间隔基热致液晶性共聚酯的结晶形态。在偏光显微镜下观察到典型的负光性球晶形态,透射电镜揭示了球晶是由厚度为10nm并沿着径向生长的片晶结构所组成,分子链沿晶片厚度方向取向排列。并研究了分子链的刚性程度对热致聚芳酯结晶性质的影响。结果表明,分子链刚性越大其结晶性和球晶的完善性越高。     

Mass spectrometric study of gamma-aryl-alpha,-gamma-diethoxy-alpha, beta-butenolides

Electron impact mass spectra of eight of the title compounds are reported. Abundant fragment ions were produced under electron impact (EI) conditions and, with one exception, the ($?hbox?ArC??equiv$ O) ions were the base peaks. The EI fragmentation mechanisms of two representative compounds were studied with the aid of high-resolution and mass-analyzed ion kinetic energy spectrometry (MIKES) data. The M(+) ions fragment to give both an odd-electron ion and an even-electron fragment ion. Two H-atom rearrangements proceeding via four-membered ring intermediates and three losses of CO through i- and alpha-fragmentations were observed under EI. On comparing fragmentations under EI conditions with those under FAB conditions for two of the compounds, the fragmentation mechanisms were reasonably similar, with additional fragmentations rationalized in terms of the ionization proton being located on the oxygen atom of the beta-ethoxy group.     

一步法合成N-1,3-二羟基丙烷-2-基烷基乙酰胺

以5-氨基烷基-2,2-二甲基-1,3-二噁烷为起始原料, 乙酸酐为酰化剂, 一步法选择性地合成氨基二醇类氨基乙酰化产物N-1,3-二羟基丙烷-2-基烷基乙酰胺. 该方法操作简便, 收率高. 所合成的4个新化合物的结构均经FTIR, ¹H NMR, ¹³C NMR及HRMS确证. N-3-(1,3-二羟基丙烷-2-基)丙基乙酰胺(1a)作为关键的中间体, 可以用于HIV-1 Tat/ PCAF BRD抑制剂4的合成.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Theoretical treatment of intermediate electrolysis electrochemical detectors

A simple approach for deriving expressions for the limiting steady-state response of the open tubular electrode, under conditions of intermediate electrolytic yields, is described. This approach couples the principles of laminar fluid dynamics with the theory of the porous electrode reactor. The dependence of the limiting current, I₁, on flow rate, V_f, has the form of I₁ α V^m_f , with m ? $\text{1}\text{3}$, depending upon the electrolytic yield. The effects of electroactive species depletion upon the detector response are discussed. Experimental results are incorporated to support the theoretical conclusions. For a tubular electrode (4-cm long) the degree of conversion decreases from 0.21 to 0.03 and m decreases from 0.42 to 0.32 as the flow rate increases from 0.15 to 3.5 ml min^-1.     

Frictional properties of dilute block-copolymer solutions and homopolymer solutions. Application to molecular weight determination.

An equation for the translational diffusion coefficient of block copolymers in dilute solution has been obtained by modifying Zimm's equation for homopolymers to take into account the existence of dissimilar segments in block copolymers. Illustrative calculations for homopolymers and block copolymers have been made and the results for homopolymers have been compared with experiments and with the calculations of Yamakawa and Fujii. A procedure has been proposed to determine the molecular weight of a block copolymer from measurements of its limiting viscosity number and its sedimentation coefficient or translational diffusion coefficient.     

Generalization of in-situ polymerization method for preparing core-shell polymeric nanospheres and hollow spheres

According to the new method of preparing core-shell nanospheres developed by our group, by using two monomers, 2-hydroxypropyl methacrylate(HPMA) and vinyl acetate(VAc), two kinds of core-shell nanospheres with poly(ɛ-caprolactone) (PCL) as the core and crosslinked poly(2-hydroxypropyl methacrylate) (PHPMA) or poly(vinyl acetate) (PVAc) as the shell were successfully prepared under similar conditions. After degrading the PCL cores of the two kinds of nanospheres by lipase, the corresponding crosslinked poly(methyl acrylic acid) hollow spheres and crosslinked poly(vinyl alcohol) hollow spheres were obtained. Results indicate that the new method we proposed for preparing core-shell polymeric nanospheres via in-situ polymerization can be generalized to a certain extent, and it is suitable for many systems provided the monomer used is soluble in water, while its corresponding polymer is insoluble in water. Translated from Chemical Journal of Chinese University, 2006, 27(9): 1762–1766 [译自: 高等学校化学学报]     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.