Monte Carlo simulation of electron beam air plasma characteristics

A high-energy electron beam generator is used to generate a plasma in atmosphere. Based on a Monte Carlo toolkit named GEANT4, a model including complete physics processes is established to simulate the passage of the electron beam in air. Based on the model, the characteristics of the electron beam air plasma are calculated. The energy distribution of beam electrons (BEs) indicates that high-energy electrons almost reside in the centre region of the beam, but low-energy electrons always live in the fringe area. The energy deposition is calculated in two cases, i.e., with and without secondary electrons (SEs). Analysis indicates that the energy deposition of SEs accounts for a large part of the total energy deposition. The results of the energy spectrum show that the electrons in the inlet layer of the low-pressure chamber (LPC) are monoenergetic, but the energy spectrum of the electrons in the outlet layer is not pure. The SEs are largely generated at the outlet of the LPC. Moreover, both the energy distribution of BEs and the magnitude of the density of SEs are closely related to the pressure of LPC. Thus, a conclusion is drawn that a low magnitude of LPC pressure is helpful for reducing the energy loss in the LPC and also useful for greatly increasing the secondary electron density in dense air.     

Fabrication of pellicle beam splitters for optical bus application

The optical bus architecture for on-board applications requires a number of optical splitters with precise split ratios to route part of the input signal. Since hollow metal waveguide provides well collimated beams with very small gap loss, it opens the possibility of inserting discrete optical beam splitters (taps). The optical tap requires low excess loss, polarization insensitivity, temperature stability, minimized walk-off of the propagating beam, and cost effective manufacturing. By benefiting from the mature interference coating technology for polarization insensitivity and temperature stability, we design a pellicle beam splitter based on a static microelec tro-mechanical system (MEMS) and develop processes to fabricate pellicle splitters using wafer level bonding of silicon and glass substrates, with subsequent thinning to 20 μm. With the approaches described in this paper, we have demonstrated optical beam splitters with excess loss of less than 0.17 dB that operate at a data rate of 10 Gb/s showing a clean eye diagram while providing controlled split ratio and polarization insensitivity. We have demonstrated a high yielding MEMS based silicon processing platform which has the potential to provide a cost effective manufacturing solution for optical beam splitters.     

Observation of electron weak localization and correlation effects in disordered graphene

We have studied the electron transport properties of a disordered graphene sample, where the disorder was intentionally strengthened by Ga⁺ ion irradiation. The magneto-conductance of the sample exhibits a typical two-dimensional electron weak localization behavior, with electron-electron interaction as the dominant dephasing mechanism. The absence of electron anti-weak localization in the sample implies strong intersublattice and/or intervalley scattering caused by the disorders. The temperature and bias-voltage dependencies of conductance clearly reveal the suppression of conductance at low energies, indicating opening of a Coulomb gap due to electron-electron interaction in the disordered graphene sample. Supported by the National Natural Science Foundation of China (Grant Nos. 10774172 and 10874220), and the National Basic Research Program of China from the MOST (Grant No. 2006CB921304)     

推广的Tschebyshev多项式及其在解强耦合波导方程中的应用

推广了Tschebyshev多项式，对推广的Tschebyshev多项式的性质作了分析；并应用于求解（ N+1）×（N+1）强耦合环形波导耦合器方程，得出解析解. 具体计算了5×5环形定向耦合器 的解，并对弱耦合与强耦合的关系进行了详细分析. 关键词： 推广的Tschebyshev多项式 强耦合波导耦合器     

光纤光栅梳状滤波器及其在新型可选波长激光器中的应用

对现有在同～段光纤上多次写入光栅制成光栅梳状滤波器的方法进行了改进,利用增加光栅长度,精确控制不同光栅的曝光时间,并结合调整光栅实际写入长度的方法,制成了不均衡度小于5％、最低峰值反射率高于95％的光纤光栅梳状滤波器;同时提出了一种新颖的可选波长光纤激光器结构。采用由上述方法制作出的反射率均衡的光纤光栅梳状滤波器和可调光滤波器结合在一起进行波长选择,实现了波长的快速准确选择,同时各个波长激光的输出特性稳定,功率均衡性好,边模抑制比大于50dB。     

ClONO2异构化反应和分解反应的理论研究

用B3LYP/6 31+G(d)和MP2 (Full) /6 31+G(d)优化ClONO2 及其分解反应和异构化反应的过渡态和产物的分子结构 .在B3LYP/6 31+G(d)水平上计算了相关分子的振动频率 .ClONO2 的几何结构、振动频率和红外强度与实验测量值符合得很好 .找到了未曾报道的立体异构体 .对这一立体异构体进行了高级别理论方法CCSD(T) /6 311G(d)和QCISD(T) /6 311G(d)的几何结构优化和振动频率计算 ,表明它是一个稳定的立体异构体 .在所研究的几种反应中 ,ClONO2 分解为NO2 +ClO是最容易进行的反应 .而ClONO2 异构为立体异构体的反应是最难进行的反应 .其所需克服的过渡态的能垒为 4 81.5 2kJ/mol,而反应吸收能量为 2 99.85kJ/mol.次难进行的是ClONO2 经TS1到反应中间体M1,再经TS12而分解为ClNO +O2 的反应 .这个反应通道所需克服过渡态的能垒为 4 2 1.5 5kJ/mol,反应吸收能量为 15 7.98kJ/mol.从以上分析可知 ,和ClO +NO2 反应生成ClONO2 比较 ,ClONO2 具有较好的稳定性 .     

LD泵浦Nd:YVO4/LBO临界相位匹配腔内倍频瓦级绿光激光器

报道了一种光纤耦合LD泵浦Nd:YVO₄晶体、腔内Ⅰ类临界相位匹配(角度匹配)LBO倍频、瓦级输出的全固态绿光激光器的设计方法和实验结果.采用短三镜折叠腔结构,通过对热透镜焦距的估算及计算机优化设计选取合适的谐振腔参量,在8 W的泵浦功率下,获得了1.6 W绿光基模输出,光-光转换效率达20%.经测量,绿光的偏振比超过400:1,4 h功率稳定度为±1.6%.     

在PowerPoint演示文稿中轻松插入Flash动画

用PowerPoint制作出的幻灯片简洁明快、条理清晰,而且PowerPoint简单易用,非常适合教师上课使用,成为教师制作多媒体课件的工具之一(在我校大部分教师采用PowerPoint制作多媒体课件).在制作多媒体课件过程中,结合适当的媒体技术(动画、声音、文字)不仅能提高课件的直观生动性,激发学生学习兴趣,同时有助于学生对课堂知识的当堂消化和理解,加深记忆.通过我校开展多媒体教学多年的实践发现:对医科学生的基础课、专业基础课和专业课教学中广泛涉及的机能性、原理性的知识适当采用动画其教学效果是传统教学方法无法比拟的.在众多的动画媒体中(avi、mov、mpg、swf、gif、ram等),Flash动画(swf文件)以其作品容量小(单个swf文件通常不到100 K)、质量高和丰富的交互性,特别是近年推出的Flash5同时能结合视频和音频,成为目前最为流行的二维动画.不仅为网页制作增添了活力,同时也为多媒体制作提供了有效的手段,既精巧又实用,素有"闪客"、"动画精灵"之美誉,越来越受到人们的青睐.如果要把Flash制作好的动画插入到PowerPoint制作的课件中,将会使PowerPoint单调的动画增色不少,使课件更具魅力.为此,我校专门开展了一系列Flash动画制作讲座,广大教师都能结合本专业制作Flash动画.如何将Flash动画加入到PowerPoint中,不少教师都是直接通过"超级连接"导入Flash课件,放映时总会出现讨厌的警告信息和警告声音提示,点击确定后打开Flash课件,有时打开的Flash课件窗口还要重新调整,使用十分不便.如何才能更恰当地引入Flash动画呢?不少杂志刊物和网上发表过类似文章,但大都比较复杂,而且在使用中特别是在PowerPoint中放映Flash动画偶尔会出现这样和那样的问题,这也是我们教学工作中经常遇到的问题,具有一定的普遍性.经过与教师们的众多交流和笔者平时反复摸索,找到了较为简便有效的方法,写出来与大家分享.     

THz波在金属镀层空芯波导中传输的理论和实验研究

本文基于微扰法求得不同金属镀层空心圆波导中各模式的损耗系数,对金属镀层空芯波导中THz波传输损耗随金属材料、波导结构等参数的变化关系进行了数值模拟.根据数值分析结果,优化设计并拉制了内径为1.1 mm的镀银空芯波导,实验测得当THz波的频率为2.5 THz时,传输损耗为8.6 dB/m,实现了THz波短距离的有效传输. 关键词： 太赫兹波 金属空芯波导 传输损耗     

量子点环嵌入Aharonov-Bohm干涉器中电子的退耦合态及反共振现象

采用Anderson模型哈密顿量和非平衡态格林函数方法对量子点环以不同构型嵌入A-B干涉器中电子输运的退耦合态及反共振现象进行了理论研究. 结果表明,量子点环A-B干涉器的结构对称性以及穿过A-B干涉器的磁通量是诱发退耦合现象的两种物理机理. 耦合量子点结构的对称性越高,体系在相干电子输运过程中表现出来的退耦合及反共振现象越明显. 而且在具有高度对称性的耦合量子点结构中,通过磁场调节体系的结构参数可以分别使第奇数或第偶数分子本征态从电极上退耦合,从而使电子输运电导表现出奇偶对等振荡现象. 这为设计纳米电子开关器件提供了一个新的物理模型. 关键词： 量子点环 A-B干涉器 退耦合 反共振