封离式He-N2-CO2激光器横模特性的测量与分析

利用激光光束分析仪,实时在线测量了一根He-N2-CO2封离式激光管的横模分布特性,得到了激光模式随放电电流的变化关系.实验表明该激光器在最佳工作电流时,容易形成低阶模运转,但很难获得基模运转,通过改善对称性以及加快冷却水流速可以获得基模运转.通过激光动力学过程分析了模式变化的形成原因,为大功率激光器模式控制与改善提供了一定的理论和实验借鉴.     

Zn(Ⅱ)-槲皮素螯合机理的紫外分光光度法研究

采用紫外分光光度法研究Zn^2＋离子与槲皮素在乙醇溶液中形成螯合物量配比及螯合机理。通过定量的槲皮素、山萘酚、柚皮素乙醇溶液与Zn^2＋离子作用,在426nm处测其溶液的吸光度,从而确定Zn^2＋）离子与槲皮素的螯合比为2：1。且螯合位置发生在槲皮素分子3-羟基和4-羰基上与3′,4′-OH位置。     

Phase control of maximal atomic coherence

The atomic coherence in a three-level Λ atom is studied, in which each optical transition is driven by a coherent field and the metastable states are coupled to each other via a microwave field. It’s shown that the atomic coherence crucially depends on the relative phase delay between the envelopes of the amplitudes of the three coupling fields. In particular, when the phase delay is adjusted to 0 or π, the maximal atomic coherence arises, while the maximal atomic coherence doesn’t occur once the phase delay is changed to π/2. The maximal atomic coherence is attributed to the trapping of the population in the lower sublevels.     

Sideband structure spontaneous spectrum without the rotating wave approximation

The effects of the non-rotating wave approximation (non-RWA) on the spontaneous emission of a V-type three-level atom are studied, where the excited states are coupled to a common ground state by a weak laser field and the upper-level doublet is driven by a strong microwave field. When the non-RWA is applied to the interaction of the atom with the microwave field, for some values of the parameters involved, the spontaneous emission spectrum is comprised of a central peak and a series of sidebands with a constant spacing of the microwave frequency, and the central peak and/or sidebands can be split into two components. The physical interpretation of the spectral characteristics is given in light of the dressed states.     

First-principles study of palladium atom adsorption on the boron- or nitrogen-doped carbon nanotubes

We have performed first-principles calculation to investigate the adsorption of a single palladium atom on the surface of the pristine and boron- or nitrogen-doped carbon nanotubes (CNTs). The results show that for the adsorption of a single palladium atom on the pristine CNT surface, the most stable site is Bridge1 site above the axial carbon–carbon bond. Either boron- or nitrogen-doped CNTs can assist palladium surface adsorption, but the detailed mechanisms are different. The enhanced palladium adsorption on boron-doped CNT is attributed to the palladium d orbital strongly hybridized with both boron p orbital and carbon p orbital. The enhancement in palladium adsorption on nitrogen-doped CNT results from activating the nitrogen-neighboring carbon atoms due to the large electron affinity of nitrogen. Furthermore, the axial bond is preferred over the zigzag bond for a palladium atom adsorbed on the surface of all three types of CNTs. The most energetically favorable site for a palladium atom adsorbed on three types of CNTs is above the axial boron–carbon bond in boron-doped CNT. The enhancement in palladium adsorption is more significant for the boron-doped CNT than it is for nitrogen-doped CNT with a similar configuration. So we conclude that accordingly, the preferred adsorption site is determined by the competition between the electron affinity of doped and adsorbed atoms and preferred degree of the axial bond over the zigzag bond.     

Propagation of phase-locked partially coherent flattened beam array in turbulent atmosphere

Analytical formulae for phase-locked partially coherent flattened beam array propagating in a turbulent atmosphere are derived based on the extended Huygens–Fresnel principle. Beam propagation factor (BPF) is introduced to evaluate the beam quality at the receiving plane. The influence of beam order, transverse coherence width length and the intensity of turbulence is discussed in detail.     

Growth and properties of air-processed GdBa2Cu3O7−δ superconductors with fined Gd2BaCuO5 and Gd2Ba4CuFeOy additions

We have succeeded in synthesizing a powder form of Gd₂Ba₄CuFeO_y (Gd2411) in air. GdBa₂Cu₃O_7−δ (Gd123)/Gd₂BaCuO₅ (Gd211) precursor powders added with different amounts of Gd₂Ba₄CuFeO_y (x = 0, 0.002, 0.004, 0.02) in molar ratio to Gd123 have been fabricated successfully into the form of large, single grains by the top seeded melt growth (TSMG) process. The relation between the additions amounts of Gd2411/Gd211 and critical current density (J_C) was analyzed. We found Gd2411 particles stably exist in the Gd123 matrix without degradation of superconducting properties owing to the existence of the Fe magnetic ion. The trapped field was observed to increase significantly compared with the bulk without Gd2411 additions.     

Synthesis of mixed metallic nanoparticles by spark discharge

Short spark discharges (2 μs) were successfully applied to generate mixed particles a few nanometres in diameter by fast quenching. Alloyed Cr–Co electrodes were applied to demonstrate this. Further it was shown that if the anode and the cathode are different materials, the discharge process mixes the vapour of both materials, forming mixed nanoparticles. Electron microscopy (TEM, SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) analyses were performed on the collected particles to study their size, morphology, composition and structure. The average compositions of the particles were measured by inductively coupled plasma (ICP). In addition, online measurements of the particle size distribution by mobility analysis were carried out. In the case of alloyed electrodes (Cr–Co), the relative concentration of the elements in the nanoparticulate sample was consistent with the electrode composition. When using electrodes of different metals (Au–Pd and Ag–Pd) the individual nanoparticles showed a range of mixing ratios. No surface segregation was observed in these mixed noble metal particles. Crystalline nanoparticulate mixed phases were found in all cases.     

半导体可饱和吸收镜被动锁模侧面抽运Nd:YAG激光器研究

利用半导体可饱和吸收镜(SESAM)锁模技术实现的超快脉冲激光器具有结构简单紧凑、脉冲序列稳定等优势,在许多领域有着重要用途,自问世以来受到国内外的广泛关注.分析了SESAM被动锁模侧面抽运固体激光器的具体要求,进行了不同条件下的SESAM被动锁模侧面抽运Nd:YAG激光器实验.获得了最高平均功率9.5 W,脉冲重复频率71 MHz,单脉冲能量约141 nJ的皮秒激光脉冲.对SESAM被动锁模侧面抽运Nd:YAG激光器进行了实验和理论分析,对实现高功率连续超短脉冲激光器进行了探讨.     

Diode-pumped Yb:Lu_2Si_2O_7 laser with tunable and efficient output

Diode-pumped laser action of a new crystal yb3＋：Lu2Si207 （LPS） is demonstrated for the first time to our knowledge. An output power of 2.22 W at 1070 nm and a slope efficiency of 34.7% were achieved with a 5 at.-% Yb： LPS sample. The tuning can cover the range form 1034 to 1080 nm.