Extraction of uranium(VI) and thorium(IV) from nitric acid solution by N-alkylcaprolactam

Extraction of uranium(VI), thorium(IV) from nitric acid has been studied with N-octylcaprolactam and N-(2-ethyl)hexylcaprolactam. Distribution coefficients of U(VI), Th(IV) and HNO₃ as a function of aqueous NHO₃ concentration, extractant concentration and temperature have been studied. The compositions of extracted species, thermodynamic parameters of extraction have been evaluated. Third phase formation in extraction of U(VI) has been studied. Back extraction behavior of U(VI) and Th(IV) from the organic phase has also been tested. The results obtained are compared with those obtained by using TBP under the same experimental conditions.     

Synthesis and Crystal Structure of Two One—dimensional Chain Copper Complexes [Cu（TTA）2（4,4‘’—azpy）] and [Cu（TTA）2（3,3‘’—azpy）

Two copper complexes [Cu(TTA)₂(4,4′‐azpy)] (1) and [Cu‐(TTA)₂(3,3′‐azpy)] (2) (HTTA = 1,1,1‐trifluoro‐3‐(2‐thenoyl)‐acetone, 4,4′‐azpy = 4,4′‐azobispyridine, 3,3′‐azpy = 3,3′‐azobispyridine) were synthesized and characterized. The crystal structures were determined by X‐ray diffraction analysis. The crystal 1 belongs to triclinic with space group P1 , a = 0.8515(2) nm, b = 0.9259(2) nm, c = 0.9468(2) nm, a = 66.126(9)°, β = 79.667(9)°, γ = 90.13(1)°, Z = 1, V = 0.6692(2) nm³, D_c = 3.425 g/cm³, γ = 2.113 mm^?1, F(000) = 694, R₁ = 0.0594, wR₂ = 0.1499. The crystal 2 belongs to monoclinic with space group P2₁/c, a = 1.0661(2) nm, b = 1.4296(3) ran, c = 1.0041(3) nm, β = 114.50(3)°, V = 1.3926(5) nm³, Z = 2, D_c = 1.646 g/ cm³, μ = 1.015 mm^?1, F(000) = 694, R₁, = 0.0535, wR₂ = 0.1113. In the crystals of complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one‐dimensional linear chains linked through the rodlike 4,4′‐azpy ligands or 3,3′‐azpy ligands.     

Configuration of MFI-type zeolite interacting with the probe molecule P(CH<Subscript>3</Subscript>)<Subscript>3</Subscript> – a theoretical study

With P(CH₃)₃ as the probe molecule adsorbed on titanium silicalite (TS-1) zeolite, the special and important role of T12 site in MFI-type zeolite was clearly elucidated. There are altogether three active sites present in TS-1 zeolite with Ti at the T12 site. Owing to the preferential adsorption of probe molecules on the first Brönsted acidic site, the Ti12 center will probably fail to show Lewis acidity. The ionic [HP(CH₃)₃]⁺ species can be stabilized by the first or second Brönsted acidic site, with the former energetically favored. The latter was formed through the transfer of the ionic [HP(CH₃)₃]⁺ species from the first to the second Brönsted acidic site.     

Selective Inversion of the Proximal or Distal Hydroxyl Groups in syn,syn-3-[N-(Alkoxycarbonyl)amino] 1,2-Diols via Cyclic Sulfates

The formation of cyclic sulfates (4) from syn,syn-3-[N-(benzyloxycarbonyl)amino] 1,2-diols provides a common intermediate to access other diastereomers via two inversion procedures. Thermolysis of the cyclic sulfates in acetonitrile normally leads to inversion of the distal hydroxyl group to form a 1,3-oxazin-2-one (6). Catalytic hydrogenation of the cyclic sulfates under basic conditions (NEt(3)) results in inversion at the proximal hydroxyl group to form a 1,3-oxazolidin-2-one (5).     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

溴酸钾氧化亮绿SF催化光度法测定痕量亚硝酸根

本文基于亚硝酸根对溴酸钾氧化亮绿ＳＦ而使其褪色所起的催化作用，建立了高灵敏度催化吸光光度法测定痕量亚硝酸根的新方法，测定范围为０．０５－２０ｎｇ／ｍｌ，用于不同水样中亚硝酸根的测定，获得了满意结果。     

(±)-金锦香酸二甲酯甲醚的合成

本文以呋喃甲酸甲酯为原料, 经羟烷基化反应, 醇解反应和O-甲基化反应合成(±)-金锦香酸二甲酯甲醚。同时, 还发现了制备2-乙烯基呋喃衍生物的新方法。     

Selection of Anodic Material Used in Electrolytic Process for Producing Hypophosphorous Acid

Black lead, Ti-Ru and Ti-PbO2 were used as anode and stainless steel was used as cathode The electrolytic process of producing hypophosphorous acid with four-compartment electrodialytic cell was studied. The comparison of some factors, such as anodic voltage, product concentration and current efficiency, of black lead, Ti-Ru, and Ti-PbO2 electrodes was conducted. As a result, theTi-PbO2 electrode is the optimal anode material used, it can be in electrolytic process for producing hypophosphorous acid.     

戊烯自由基阳离子的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-31G(d,p)、6-31＋G(d,p)、6-311G(d,p)及6-311＋G(d,p)基组，分别对2-C5H10＋和1-C5H10＋的各种构象进行了几何构型优化，并用B3LYP/6-311G(d,p)进行了频率分析计算.计算预言1-C5H10＋具有非平面构型，与以往报导的从头算计算结论相反.在两个自由基阳离子的各种构象的B3LYP几何构型上，进行了B3LYP和UMP2(full)方法的超精细偶合常数计算，得到了比以往更好的结果.     

有害杂草的微量元素分析

紫茎泽兰和水葫芦均属有害杂草，大规模防治的有效方法还未找到，本文分析研究了采自昆明郊区的紫茎泽兰和滇池水域的水葫芦中微量元素的含量，为进一步开发利用这两种杂草提供科学依据。