TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

In search of covalently bound tetra- and penta-oxygen species: a photoelectron spectroscopic and Ab initio investigation of MO4- and MO5- (M = Li,Na, K,Cs)

Although neutral and ionic O4(0/-/+) species have been observed experimentally and considered for energetic materials, O4(2-) and O5(2-) dianions have not yet been explored. O4(2-) is valent isoelectronic to the well-known ClO3- and SO3(2-) anions, and O5(2-) is valent isoelectronic to ClO4- and SO4(2-). All are stable, common anions in solutions and inorganic salts. In this article, we explore the possibility of making covalently bound O4(2-) and O5(2-) species stabilized in the forms of M+O4(2-) and M+O5(2-) (M = Li, Na, K, Cs) in the gas phase. Laser vaporization experiments using M-containing targets and an O2-seeded carrier gas yielded very intense mass peaks corresponding to MO4- and MO5-. To elucidate the structure and bonding of the newly observed MO4- and MO5- species, we measured their photoelectron spectra and then compared them with ab initio calculations and the spectra of ClO3-, Na+SO3(2-), ClO4-, and Na+SO4(2-). Careful analyses of the experimental and ab initio results showed, however, that the observed species are of the forms, O2-M+O2- and O2-M+O3-. The more interesting M+O4(2-) and M+O5(2-) species were found to be higher-energy isomers, but they are true minima on the potential energy surfaces, which suggests that it might be possible to synthesize bulk materials containing covalently bound tetra- and pentatomic oxygen building blocks.     

Comparison between ab Initio and Modified INDO-MO Calculations of N20

Both STO-3G ab initio and s-p separation-type-modified INDO semiempirical methods were applied to molecular-orbital calculation of the N₂₀ molecule. From these two methods, the optimized bond distances between the nearest N atoms (d_n-n) and the most calculated thermodynamic data are close to each other. The positive values of ΔH_a° and ΔG_a° for the atomization reaction in this work prove that N₂₀ is stable. In contrast to conventional INDO and MINDO/3, but similar to former AMI and MNDO calculations, both ΔH_r° and ΔG_r° are positive in the formation reaction, which indicates that N₂₀ belongs to the category of high-energy molecules.     

Chemically modified resins for solid-phase extraction

The packings most widely used for solid-phase extraction are hydrophobic and make poor surface contact with aqueous samples unless the resins are first treated with an activating organic solvent such as methanol. Insertion of an acetyl- or hydroxymethyl group into a porous polystyrene-divinylbenzene resin provides a more hydrophilic surface that is easily wetted by water alone. Small columns of the chemically modified resins were found to be very efficient for the solid-phase extraction of many types of organic solutes from aqueous samples. Comparative recovery studies showed that the modified resins are superior to both silica packings and unmodified organic resins for the solid-phase extraction of organic compounds, and especially for polar organics such as phenols.     

Oligomerization and Polymerization of Ethylene Initiated by a Novel Ni(Ⅱ)-Based Acetyliminopyridine Complexes as Single-Site Catalysts

Novel Ni(Ⅱ)-based acetyliminopyridine complexes 1b, 2b, 3b (1-3b), which are synthesized from ligands 1a, 2a, 3a (1-3a) and [NiCl2(DME)], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane (MAO). The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linearα-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers>C4. The activity of 3b-MAO complex is 6.3×107 g/(molNi·h) at 50℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.     

咪唑-金属配合物的合成、性质及其与DNA的作用机理

Three hexakis（imidazole）metallo complexes of Co, Cd and Ni were synthesized and spectroscopically characterized. The crystal and molecular structures have been determined by X-ray crystallography analysis. The metal ions have an octahedral geometry with the MN6 chromophore. The electrochemical experimental results indicate that both [Co（Im）6]C12·2HCl·2H2O （1） and [Ni（Im）6]C12·4H2O （3） [Im=imidazole] could interact with DNA mainly by intercalation.     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

Trace determination of arsenic species by capillary electrophoresis with direct UV detection using sensitivity enhancement by counter- or co-electroosmotic flow stacking and a high-sensitivity cell

Stacking techniques used independently and also with a high-sensitivity cell (HSC) were employed to optimise sensitivity and detection limits in the direct photometric detection of the following eight arsenic species by capillary zone electrophoresis (CZE): arsenite, arsenate, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), 4-hydroxy-3-nitrophenylarsonic acid (Roxarsone), p-aminophenylarsonic acid (p-ASA), 4-nitrophenylarsonic acid (4-NPAA), and phenylarsonic acid (PAA) (target analytes). The stacking mechanisms, optimised stacking and separation conditions, and concentration sensitivity enhancement factors were discussed and compared for (i) normal stacking mode (NSM, sometimes also referred to as field-amplified stacking) in an uncoated fused-silica capillary in the counter-electroosmotic flow (EOF) mode, (ii) large-volume sample stacking (LVSS) with polarity switching, and (iii) the less often applied stacking method of co-EOF NSM stacking with EOF reversal using a poly(diallydimethylammonium chloride) (PDDAC)-coated capillary. The optimal injection volumes were 7.4, 60 and 17.2% of the total capillary volume, for the above three methods, respectively. LVSS with polarity switching gave the lowest limit of detection (LOD). The use of the HSC further reduced the LOD of each target analytes by a factor of 5-8 times. By combining LVSS and HSC, LODs of the target analytes could be reduced by a factor of 218-311, to 5.61, 9.15, 11.1, and 17.1 microg/L for As(III), DMA, MMA, and As(V), respectively. The method was demonstrated to be applicable to the determination of the target analytes in tap water and lake water, with recoveries in the range of 89.4-103.3%.     

Determination of bisphenol A in human breast milk by HPLC with column-switching and fluorescence detection

A highly sensitive HPLC method was developed for the determination of xenoestrogenic compound, bisphenol A (BPA) in human breast milk samples. After a two-step liquid-liquid extraction, BPA was derivatized with fluorescent labeling reagent, 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl). The excess fluorescent reagent could be removed effectively using a column-switching system. The separation of DIB-BPA from endogenous materials in milk was carried out on two C(18) columns and fluorescence intensity was monitored at 475 nm with the excitation of 350 nm. A good linearity (r = 0.994) was observed of BPA in the concentration range of 0.2-5.0 ng mL(-1) in breast milk, and the detection limit was 0.11 ng mL(-1) at a signal-to-noise ratio of 3. Intra- and inter-day precision (RSD, %) were less than 8.7 and 10.4, respectively. Twenty-three breast milk samples of healthy lactating women were analyzed for the BPA concentration; the mean value was 0.61 +/- 0.20 ng mL(-1), with no correlation to the lipid content of milk samples.     

ATISINE型二萜生物碱的圆二色谱(CD)

C_(20)-二萜生物碱结构复杂,环上大多有含氧的基团。利用NMR、MS等确定羟基、羰基在分子中的位置往往不够有力。特別是对于C_1~3或C_(11)位上羰基,没有可靠而简便的光谱鉴別方法。我们通过对几个Atisine型含羰基化合物的圆二色谱研究发现,由CD谱确定羰基在C_6位、C_(11)位及C_(13)位是一种简便有效的方法。