A theoretical study of the reaction of O(3P) with isobutene

The reaction of O((3)P) with isobutene ((CH(3))(2)C=CH(2)) is investigated using the unrestricted second-order M?ller-Plesset perturbation (UMP2) and complete basis set CBS-4M level methods. The minimum energy crossing point (MECP) between the singlet and triplet potential energy surfaces is located using the Newton-Lagrange method, and it is shown that the MECP plays a key role. The calculational results indicate that the site selectivity of the addition of O((3)P) to either carbon atom of the double bond of isobutene is weak, and the major product channels are CH(2)C(O)CH(3) + CH(3,) cis-/trans-CH(3)CHCHO + CH(3), (CH(3))(2)CCO + H(2), and CH(3)C(CH(2))(2) + OH, among which (CH(3))(2)CCO + H(2) is predicted to be the energetically most favorable one. The complex multichannel reaction mechanisms are revealed, and the observations in several recent experiments could be rationalized on the basis of the present calculations. The formation mechanisms of butenols are also discussed.     

A miniaturized HTS microwave receiver front-end subsystem for radar and communication applications

This paper presents a miniaturized high performance high temperature superconducting (HTS) microwave receiver front-end subsystem, which uses a mini stirling cryocooler to cool a high selective HTS filter and a low noise amplifier (LNA). The HTS filter was miniaturized by using specially designed compact resonators and fabricating with double-sided YBCO films on LAO substrate which has a relatively high permittivity. The LNA was specially designed to work at cryogenic temperature with noise figure of 0.27 dB at 71 K. The mini cryocooler, which is widely used in infrared detectors, has a smaller size (60 mm × 80 mm × 100 mm) and a lighter weight (340 g) than the stirling cryocoolers commonly used in other HTS filter subsystem. The whole front-end subsystem, including a HTS filter, a LNA, a cryocooler and the vacuum chamber, has a size of only φ120 mm × 175 mm and a weight of only 3.3 kg. The microwave devices inside the subsystem are working at 71.8 K with a consumed cooling power of 0.325 W. The center frequency of this subsystem is 925.2 MHz and the bandwidth is 2.7 MHz (which is a fractional bandwidth of 0.2%), with the gain of 19.75 dB at center frequency and the return loss better than ?18.11 dB in the pass band. The stop band rejection is more than 60 dB and the skirt slope is exceeding 120 dB MHz^?1. The noise figure of this subsystem is less than 0.8 dB. This front-end subsystem can be used in radars and communication systems conveniently due to it’s compact size and light weight.     

Periodic surface nanostructures on polycrystalline ZnO induced by femtosecond laser pulses

Periodic surface nanostructures induced by femtosecond laser pulses on polycrystalline ZnO are presented. By translating the sample line-by-line under appropriate irradiation conditions, grating-like nanostructures with an average period of 160 nm are fabricated. The dependence of surface morphologies on the processing parameters, such as laser fluence, pulse number and laser polarization, are studied by scanning electronic microscope (SEM). In addition, photoluminescence (PL) analysis at room-temperature indicates that the PL intensity of the irradiated area increases significantly compared with the un-irradiated area. Using femtosecond laser pulses irradiation to fabricate periodic surface nanostructures on polycrystalline ZnO is efficient, simple and low cost, which shows great potential applications in ZnO-based optoelectronic devices.     

Evidence for ψ' decays into γπ0 and γη

The decays ψ'→γπ(0), γη and γη' are studied using data collected with the BESIII detector at the BEPCII e(+)e(-) collider. The processes ψ'→γπ(0) and ψ'→γη are observed for the first time with signal significances of 4.6σ and 4.3σ, respectively. The branching fractions are determined to be B(ψ'→γπ(0))=(1.58±0.40±0.13)×10(-6), B(ψ'→γη)=(1.38±0.48±0.09)×10(-6), and B(ψ'→γη')=(126±3±8)×10(-6), where the first errors are statistical and the second ones systematic.     

The optimal execution strategy of employee stock options

In this paper, we develop an optimal execution strategy for employee stock options by means of the fluid model, in which a voluntary turnover is considered. We show that the value function is the viscosity solution of the Hamilton-Jacobi-Bellman variational inequality and prove the uniqueness of the viscosity solution. Finally, we present numerical illustrative examples and numerical solutions of optimal strategies which are computed by the finite difference method.     

Selective diethylzinc reduction of imines in the presence of ketones catalyzed by Ni(acac)2

A selective reduction method of an electronically deficient imine in the presence of ketone was developed by employing Et(2)Zn and 5 mol % of Ni(acac)(2). The method was applied in the reduction of S(S)-tert-butanesulfinyl ketimines 1 to afford amines 2 in 23-92% yields and 73:27 to 98:2 diastereoselectivities. A plausible mechanism was proposed on the basis of an NMR study.     

Observation of two new N* peaks in J/psi-->ppi-n and ppi+n decays

The decay J/psi-->NNpi provides an effective isospin 1/2 filter for the piN system due to isospin conservation. Using 58x10(6) J/psi decays collected with the Beijing Electromagnetic Spectrometer at the Beijing Electron Positron Collider, more than 100 thousand J/psi-->ppi-n+c.c. events are obtained. Besides the two well-known N* peaks at around 1500 MeV/c2 and 1670 MeV/c2, there are two new, clear N* peaks in the ppi invariant mass spectrum around 1360 MeV/c2 and 2030 MeV/c2 with statistical significance of 11sigma and 13sigma, respectively. We identify these as the first direct observation of the N*(1440) peak and a long-sought missing N* peak above 2 GeV/c2 in the piN invariant mass spectrum.     

Ag-N共掺p型ZnO的第一性原理研究

采用基于密度泛函理论的第一性原理赝势法对Ag-N共掺杂ZnO体 系以及间隙N和间隙H掺杂p型ZnO: (Ag, N)体系的缺陷形成能和离化能进行了研究. 结果表明, 在Ag_Zn和N_O所形成的众多受主复合体中, Ag_Zn-N_O受主对不仅具有较低的缺陷形成能同时其离化能也相对较小, 因此, Ag_Zn-N_O受主对的形成是Ag-N共掺ZnO体系实现p型导电的主要原因. 研究发现, 当ZnO: (Ag, N)体系有额外间隙N原子存在时, Ag_Zn-N_O受主对容易与N_i形成Ag_Zn-(N₂)_{m O}施主型缺陷, 该施主缺陷的形成降低了Ag-N共掺ZnO的掺杂效率因而不利于p型导电. 当间隙H引入到ZnO: (Ag, N)体系时, H_i易与Ag_Zn-N_O受主对形成 受主-施主-受主复合结构(Ag_Zn-H_i-N_O), 此复合体的形成不仅提高了Ag_Zn-N_O受主对在ZnO中的固溶度, 同时还能使其受主能级变得更浅而有利于p型导电. 因此, H辅助Ag-N共掺ZnO可能是一种有效的p型掺杂手段. 关键词： p型ZnO 缺陷形成能 受主离化能 第一性原理     

Valorization of Rice Straw via Hydrotropic Lignin Extraction and Its Characterization

Rice straw hydrotropic lignin was extracted from p-Toluene sulfonic acid (p-TsOH) fractionation with a different combined delignification factor (CDF). Hydrotropic lignin characterization was systematically investigated, and alkaline lignin was also studied for the contrast. Results showed that the hydrotropic rice straw lignin particle was in nanometer scopes. Compared with alkaline lignin, the hydrotropic lignin had greater molecular weight. NMR analysis showed that β-aryl ether linkage was well preserved at low severities, and the unsaturation in the side chain of hydrotropic lignin was high. H units and G units were preferentially degraded and subsequently condensed at high severity. High severity also resulted in the cleavage of part β-aryl ether linkage. ³¹P-NMR showed the decrease in aliphatic hydroxyl groups and the increasing carboxyl group content at high severity. The maximum weight loss temperature of the hydrotropic lignin was in the range of 330–350 °C, higher than the alkaline lignin, and the glass conversion temperature (T_g) of the hydrotropic lignin was in the range of 107–125 °C, lower than that of the alkaline lignin. The hydrotropic lignin has high β-aryl ether linkage content, high activity, nanoscale particle size, and low T_g, which is beneficial for its further valorization.     

Electrostatic discharge effect on safe distance determination for 500 kV ac power line's helicopter inspection

The effect of electrostatic discharge on safe distance determination for 500 kV ac transmission line's helicopter inspection is investigated. Potential difference exists while helicopter is near the power transmission line, which is harmful to the inspection persons. The electric field in the helicopter cabin is calculated when it is near the power line. The result indicates that the potential difference becomes higher with the decrease of the distance between the helicopter and transmission line. Considering the discharge energy and the guarantee of the persons' safety, the safe distance for 500 kV ac transmission lines is determined as d ≥ 15 m.