超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

La0.82Te0.18MnO3薄膜的输运特性和光诱导效应

用脉冲激光沉积法制备了非金属Te掺杂的钙钛矿锰氧化物La_0.82Te_0.18MnO₃单晶薄膜.该薄膜从83 K升温至373 K过程中发生金属-绝缘体相变，转变点温度为283 K.其电阻率在T<T_MI时符合电子-电子、电子-磁振子散射公式；在T>T_MI时为小极化子输运.薄膜在低温段连续激光(波长为532 nm，40 mW)作用下电阻率显著增大，电阻变化率在253 K达到最大值51.1%,该变化率远大于相同条件下的空穴掺杂材料；在高温段产生了较小的光电导，电阻变化率小于10%.这些现象主要与激光激励下自旋系统和小极化子的变化有关.La_0.82Te_0.18MnO₃薄膜在激光诱导下具有明显的与自旋相关的弛豫现象.激光开始作用时薄膜电阻率随时间的变化符合指数关系. 关键词： 0.82Te_0.18MnO₃薄膜')" href="#">La_0.82Te_0.18MnO₃薄膜 光诱导 输运特性 电子掺杂     

金锥对靶背向超热电子分布的影响

 采用20 TW啁啾脉冲放大的ps激光辐照金锥靶和平面靶，对靶背向产生的超热电子角分布和能谱进行了实验研究。结果表明:金锥对超热电子的产生具有重要的影响。与平面靶情况相比，锥形靶靶背向产生的超热电子数量增加，电子能量为2.0~2.5 MeV的超热电子数目有大幅度增长；锥形靶背向超热电子的空间发散角大于平面靶,这是由于啁啾脉冲放大激光所固有的较高脉冲前沿产生的预等离子体造成的影响。     

公务员最优录用分配方案的数学模型

本文通过建立0-1规划模型,设计了一种公务员招聘中的最优录用分配方案,并运用L INGO软件求得了一个实际问题的最优解.     

A solar radio moving type IV burst of expanding arches type involving multi-sources

A complex solar radio moving type IV burst was observed on 23 September 1998 with the broadband (1.0–2.0 GHz and 2.6–3.8 GHz) spectrometers with high temporal and spectral resolutions at National Astronomical Observatories of China (NAOC). Comparing to the high spatial resolution data of Siberian Solar Radio Telescope (SSRT), we find that this burst is a rare type of moving type IV burst which is caused by the expanding arches, and the spatial structure oscillations of the radio sources are related with the time structure pulsations of the radio emission. Furthermore, the burst is associated with the multiple quasi-periodic long-term pulsations, and this suggests the existence of multi-scale magnetic structures in a large expanding coronal arch. We think the moving type IV burst is due to the synchrotron emission of the energetic electrons trapped in the expanding arch, and the multiple quasi-periodic pulsations are due to the second harmonic plasma emission.     

Uniform convergence of Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity

In this article we prove uniform convergence estimates for the recently developed Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity. These multigrid methods are defined in terms of the “Galerkin approach,” where quadratic forms over coarse grids are constructed using the quadratic form on the finest grid and iterated coarse‐to‐fine intergrid transfer operators. Previously, uniform estimates were obtained for problems with full elliptic regularity, whereas these estimates are derived with less than full elliptic regularity here. Applications to the nonconforming P₁, rotated Q₁, and Wilson finite elements are analyzed. The result applies to the mixed method based on finite elements that are equivalent to these nonconforming elements. © 2002 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 18: 203–217, 2002; DOI 10.1002/num.10004     

荧光光谱法研究蛋白质构象的电磁-温度协同效应

长期以来电磁生物效应受到人们普遍关注，近年来从各个角度进行了相关研究。电磁－温度协同效应是当前的热点。本研究通过电磁场及温度协同对蛋白质影响的研究，发现蛋白质在电磁场作用下的不可逆变性，而且这种变性也遵循Arrhenius规律，并进一步得出电磁－温度协同作用的蛋白质变性模型。本文从分子反应动力学的角度解释了电磁－温度协同效应，并对非热效应作了一定的探讨。     

VO2-Based Infrared Microbolometer Array

V0₂-based thin film materials on silicon substrates are fabricated by ion beam sputtering and a post-annealing which is different from the conventional fabricating method. An infrared linear microbolometer array with 128 pixels is prepared using as-deposited vanadium dioxide thin films. Optical and electrical properties for V0₂-based microbolometer array are tested.     

Modelling for the planning and management of bed capacities in hospitals

The internal dynamics of a hospital represent a complex non-linear structure. Planning and management of bed capacities must be evaluated within an environment of uncertainty, variability and limited resources. A common approach is to plan and manage capacities based on simple deterministic spreadsheet calculations. This paper demonstrates that these calculations typically do not provide the appropriate information and result in underestimating true bed requirements. More sophisticated, flexible and necessarily detailed capacity models are needed. The development and use of such a simulation model is presented in this paper. The modelling work, in conjunction with a major UK NHS Trust, considers various types of patient flows, at the individual patient level, and resulting bed needs over time. The consequence of changes in capacity planning policies and management of existing capacities can be readily examined. The work has highlighted the need for evaluating hospital bed capacities in light of both bed occupancies and refused admission rates. The relationship between occupancy and refusals is complex and often overlooked by hospital managers.