分光计测定光栅常数

针对分光计测定光栅常数实验中入射光线偏离光栅法线的情形,提出了计算光栅常数的一个近似表达式。在不增加额外测量的前提下,使实验结果更接近于实际值。     

Common (π,π) Band Folding and Surface Reconstruction in Fe As-Based Superconductors

High resolution angle-resolved photoemission spectroscopy(ARPES) measurements are carried out on CaKFe_4 As_4,KCa_2 Fe_4 As_4 F_2 and(Ba_(0.6)K_(0.4))Fe_2 As_2 superconductors.Clear evidence of band folding between the Brillouin zone center and corners with a(π,π) wave vector has been found from the measured Fermi surface and band structures in all the three kinds of superconductors.A dominant ~(1/2)×~(1/2) surface reconstruction is observed on the cleaved surface of CaKFe_4As_4 by scanning tunneling microscopy(STM) measurements.We propose that the commonly observed ~(1/2)×~(1/2) reconstruction in the FeAs-based superconductors provides a general scenario to understand the origin of the(π,π) band folding.Our observations provide new insights in understanding the electronic structure and superconductivity mechanism in iron-based superconductors.     

MOCVD生长的InN薄膜中In分凝现象

利用金属有机物化学气相淀积(MOCVD)方法不同生长条件下在c面蓝宝石衬底上制备了InN薄膜,通过不同的物理表征手段研究了InN薄膜的物理性质,结果表明:合适的生长温度可以抑制InN薄膜表面分凝现象。研究认为较低的生长温度使作为N源的NH3分解率较低,In—N的成键可能性小,导致In在表面聚集出现分凝;而较高生长温度时,InN薄膜中In—N键能较小,易发生断裂,反应活性较强的N和H原子逸离薄膜表面,In滞留在薄膜表面也导致In分凝现象的出现。相对于表面分凝的样品,未出现表面分凝的样品的薄膜晶体质量和表面形貌也得到了提高。同时,通过Raman散射谱研究了晶格振动E2声子模的应力效应。     

超临界水在倾斜光管中的传热不均匀特性研究

对超(超)临界压力下水在倾斜光管内的传热特性进行了比较系统的实验研究.实验段管径为φ32×3mm,倾角α=20°;试验压力P=23~34MPa,内壁热负荷q=300~500kW/m2,管内质量流速G=300~2000kg/m2s.得到了不同工况下倾斜光管内壁温和管内换热系数的周向分布及其变化规律,考察了压力、质量流速及热负荷对倾斜光管内壁温度的周向分布的影响,重点分析了管内上下母线处内壁温度差随工质焓值变化的特性及机理,讨论了大比热区水的物性变化对倾斜光管内传热不均匀性的影响,并与亚临界压力下的对应实验结果进行了比较.     

NIR TADF emitters and OLEDs: challenges,progress, and perspectives

Near-infrared (NIR) light-emitting materials show excellent potential applications in the fields of military technology, bioimaging, optical communication, organic light-emitting diodes (OLEDs), etc. Recently, thermally activated delayed fluorescence (TADF) emitters have made historic developments in the field of OLEDs. These metal-free materials are more attractive because of efficient reverse intersystem crossing processes which result in promising high efficiencies in OLEDs. However, the development of NIR TADF emitters has progressed at a relatively slower pace which could be ascribed to the difficult promotion of external quantum efficiencies. Thus, increasing attention has been paid to NIR TADF emitters. In this review, the recent progress of NIR TADF emitters has been summarized along with their molecular design strategies and photophysical properties, as well as electroluminescence performance data of their OLEDs, respectively.

This review presents the recent progress of NIR TADF emitters along with their molecular design strategies and photophysical properties, as well as the electroluminescence performance data of the emitters and their OLEDs.     

d2,8电子体系共价效应对光谱的影响

在含过渡金属离子的半磁半导体的光学和磁学性质研究中,由于体系的共价性较强,d轨道不再是纯d轨道,而是混合轨道t2g或eg。相应地,需要引入两个共价因子Nt和Ne。建立在混合轨道上的含有共价因子的能量矩阵称为广义能量矩阵。建立了d2,8电子体系的(45×45)阶广义能量矩阵。在广义能量矩阵中,拉卡(Racah)参量A不再是相加常量,同时,d8电子体系不能简单地视为互补的d2空穴体系,因为它们的能量矩阵形式不同。Nt和Ne虽然是属于两个不同轨道的不同的共价因子,但在数值上不能有大的差别,因为考虑进共价效应后,拉卡静电参量A对能级计算有极大的影响。这意味着在通常的光谱拟合中所采用的BCΔ方案是好的近似。以上结论被应用于ZnS∶Ni2 的d-d跃迁谱,计算结果与实验符合。     

Broadband Sheet Parametric Oscillator for x~((2)) Optical Frequency Comb Generation via Cavity Phase Matching

We demonstrate a broadband optical parametric oscillation, using a sheet cavity, via cavity phase-matching. A21.2 THz broad comb-like spectrum is achieved, with a uniform line spacing of 133.0 GHz, despite a relatively large dispersion of 275.4 fs~2/mm around 1064 nm. With 22.6% high slope efficiency, and 14.9 kW peak power handling, this sheet optical parametric oscillator can be further developed for x~((2)) comb.     

Nickel-catalyzed cross-electrophile allylation of vinyl bromides and the modification of anti-tumour natural medicine β-elemene

Herein, we present a facile and efficient allylation method via Ni-catalyzed cross-electrophile coupling of readily available allylic acetates with a variety of substituted alkenyl bromides using zinc as the terminal reductant. This Ni-catalyzed modular approach displays excellent functional group tolerance and a broad substrate scope, which the creation of a series of 1,4-dienes including several structurally complex natural products and pharmaceutical motifs. Moreover, the coupling strategy has the potential to realize enantiomeric control. The practicality of this transformation is demonstrated through the potent modification of the naturally antitumor active molecule β-elemene.

Herein, we present a facile and efficient allylation method via Ni-catalyzed cross-electrophile coupling of readily available allylic acetates with a variety of substituted alkenyl bromides using zinc as the terminal reductant.     

几种粉螨同工酶比较及亲缘关系初探

以5种粉螨为实验材料,以普通肉食螨和桔全爪螨为对照,采用垂直板型聚丙烯酰胺凝胶电泳法（PAGE）,对常见同工酶EST、MDH、ADH、CAT等进行比较研究。结果表明：不同种类粉螨间的酶带具有多样性,存在不同程度的相似相异性,为粉螨的分类鉴定提供了佐证,利用相似系数初步分析了几种粉螨间亲缘关系的远近。     

Applications of Titanium Dioxide Nanostructure in Stomatology

Breakthroughs in the field of nanotechnology, especially in nanochemistry and nanofabrication technologies, have been attracting much attention, and various nanomaterials have recently been developed for biomedical applications. Among these nanomaterials, nanoscale titanium dioxide (nano-TiO₂) has been widely valued in stomatology due to the fact of its excellent biocompatibility, antibacterial activity, and photocatalytic activity as well as its potential use for applications such as dental implant surface modification, tissue engineering and regenerative medicine, drug delivery carrier, dental material additives, and oral tumor diagnosis and treatment. However, the biosafety of nano-TiO₂ is controversial and has become a key constraint in the development of nano-TiO₂ applications in stomatology. Therefore, in this review, we summarize recent research regarding the applications of nano-TiO₂ in stomatology, with an emphasis on its performance characteristics in different fields, and evaluations of the biological security of nano-TiO₂ applications. In addition, we discuss the challenges, prospects, and future research directions regarding applications of nano-TiO₂ in stomatology that are significant and worthy of further exploration.