基于ARM11的热力站远程水质监控系统设计

为实现对循环水水质的远程监测,设计并开发了一种基于嵌入式技术的热力站远程水质监测系统的监测终端。监测终端由水质传感器、GPRS模块、通信转换模块及嵌入式开发板组成。嵌入式开发板以ARM11系列的Tiny6410为硬件基础,并嵌入WinCE系统作为软件平台,同时加入SQLite数据库以实现将水质传感器采集到的氯离子、PH值、溶解氧等参数的本地存储、查询及图表显示。最后监测终端通过GPRS模块与数据中心建立无线连接,接收数据中心的配置命令,并将现场测得数据发送到远端数据中心。调试结果表明：远程监测终端实现了循环水水质远程监测的功能要求,对于实现水质自动化监测具有一定的理论意义和实用价值。     

Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

AuQ+碰撞氦原子单电离的全微分截面

利用三体扭曲波计算了3.6 MeV/amu的Au^Q+ (Q=24,53)碰撞氦原子单电离的全微分截面,其结果与实验数据和其它理论进行了比较,表明全微分截面受到高电荷入射粒子的强烈影响,敲出的电子被“拖拽”沿着向前的方向. 但是,所有的理论结果都不能呈现实验上全微分截面的独特的向前峰.     

Origins of the Forward Emission of Complex Fragments for 40Ar+159Tb Reaction at 30MeV/u

Light charged particles and complex fragments have been measured at forward angles in coincidence with two fission fragments for ⁴⁰Ar+¹⁵⁹Tb reaction at 25MeV/u. These three-body coincident events were sorted as a function of the impact parameter using linear momentum transfer and total transverse momenta methods. Equilibrium statistical emissions of complex fragments from quasi-target residues accompanied by non-equilibrium mid-rapidity components were found to dominate in central collisions, while projectile fragmentations were found to dominate in peripheral collision. Three components of complex-fragments from quasi-target, quasi-projectile and mid-rapidity soures were found in mid-central collision.     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

Dynamic characteristics of gas jets from subsonic and supersonic nozzles for high pressure gas laser cutting

During laser cutting of stainless steels, titanium and aluminum alloys, a coaxial and high pressure inert gas jet is used to improve the cut edge quality. The process normally consumes a large amount of inert gas and has a poor tolerance to variation in process parameters. This is solely because the gas nozzles are mostly of the conical and convergent type in which the gas jets are subsonic. Based on two dimensional steady state gas dynamic theory, computer simulation and shadowgraphic techniques, the gas jet patterns from conical nozzles and the newly designed supersonic nozzles are analyzed. The distribution of pressure, momentum, gas density and existence of shock waves are predicted and mapped. Based on these characteristics, the effect of the gas jets upon the cut quality is explained. It is concluded that a supersonic gas jet offers the best flow characteristics for high pressure laser cutting.     

Origins of Intermediate Mass Fragments for 40Ar+natAg Reaction at 30 MeV/u

The energy spectra of intermediate-mass fragments (IMF) (3≤Z≤16) have been measured from 6° to 110° for ⁴⁰Ar+^natAg reachon at 30 MeV/u. The energy spectra were analyzed by the moving source model. The natUres of the projechle-like source, target-like source and mid-rapidity source as well as the evolution with angle and nuclear charge were discussed. Two intermediate mass fragments, measured by correlation method in forward angles, come from two sources. One comes from projectile-like source, and other one mainly comes from intermediate source respectively.     

高速高饱和单行载流子光探测器的设计与分析

设计了一种In P基的背入射台面结构的单行载流子光探测器.通过在吸收层中采取高斯型掺杂界面及引入合适厚度和掺杂浓度的崖层,使得光探测器同时具备了高速和高饱和电流特性.理论分析表明,在光敏面为14μm2、反向偏压为2 V条件下,该器件的3 d B带宽可达58 GHz,直流饱和电流高达158 m A.在大功率光注入条件下,详细分析了光探测器带宽降低和电流饱和现象,得出能带偏移和电场坍塌是其根本原因的结论.     

基于工业CT图像重构的网格模型的保特征简化方法

对基于工业CT图像重构的网格模型进行网格简化时,大多数现有网格模型简化算法会丢失特征,出现网格质量不好的问题。因此提出一种网格模型保特征简化方法,该方法用三角形折叠法对原始模型进行简化,当简化后模型的平均二面角角度误差达到允许误差后,再使用边折叠法对模型进行简化。在三角形折叠法中提出了利用被折叠三角形的法向量、各个顶点的高斯曲率及其在周边三角形上的投影确定该三角形的折叠点,利用局部体积误差与二面角角度误差的无因次化和确定折叠代价的方法;在边折叠法中提出了将二面角角度误差引入到二次误差测度（QEM）法的折叠代价中的改进QEM法。实验结果表明：与其他算法相比,该方法能够生成保特征、高质量、低几何误差的网格模型。