Preparation of aluminum nitride fibers from alumina gel fibers by nitridation in ammonia

Aluminum nitride (AlN) fibers were prepared from alumina gel fibers and by heat-treatment in ammonia. The influence of silica on the formation of AlN was investigated. It was shown that phase transformation of alumina (γ-Al₂O₃ to α-Al₂O₃) and nitridation reaction took place above 1,100 °C for pure alumina fiber. The addition of a small amount of silica (3 wt%) suppressed the formation of α-Al₂O₃ and preserved the highly reactive metastable alumina, and nitridation rate was enhanced. Fine grain (~20 nm) AlN fibers were obtained for pyrolysis at 1,150–1,250 °C for 3 h in ammonia, and AlN was identified as the sole crystalline phase.     

A pH-sensitive controlled dual-drug release from meso-macroporous silica/multilayer-polyelectrolytes coated SBA-15 composites

A novel dual-drug delivery system based on mesoporous-macroporous silica/polyelectrolytes-SBA-15 has been synthesized. The structure and composition of these materials were characterized by powder X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and N₂ adsorption–desorption measurements. In this system, water-soluble metformin hydrochloride and fat-soluble ibuprofen were used as model drugs to study the controlled release behavior. The pH-controlled release of individual drugs was obtained by the primary release of metformin hydrochloride from polyelectrolytes-SBA-15 in acid condition and the predominant release of ibuprofen from MMC in alkaline environment. The results show that the polyelectrolytes-SBA-15/mesoporous-macroporous silica can be used as dual-drug release system and the individual drug can be controlled release with the change of pH value of the environment.     

Copper‐Catalyzed Aerobic Oxidative C?H and C?C Functionalization of 1‐[2‐(Arylamino)aryl]ethanones Leading to Acridone Derivatives

Efficient copper‐catalyzed aerobic oxidative C? H and C? C functionalization of 1‐[2‐(arylamino)aryl]ethanones leading to acridones has been developed. The procedure involves cleavage of aromatic C? H and acetyl C? C bonds with intramolecular formation of a diarylketone bond. The protocol uses inexpensive Cu(O₂CCF₃)₂ as catalyst, pyridine as additive, and economical and environmentally friendly oxygen as the oxidant, and the corresponding acridones with various functional groups were obtained in moderate to good yields.     

Underpotential Deposition‐Induced Synthesis of Composition‐Tunable Pt?Cu Nanocrystals and Their Catalytic Properties

Pt? Cu alloy octahedral nanocrystals (NCs) have been synthesized successfully by using N,N‐dimethylformamide as both the solvent and the reducing agent in the presence of cetyltrimethylammonium chloride. Cu underpotential deposition (UPD) is found to play a key role in the formation of the Pt? Cu alloy NCs. The composition in the Pt? Cu alloy can be tuned by adjusting the ratio of metal precursors in solution. However, the Cu content in the Pt? Cu alloy NCs cannot exceed 50 %. Due to the fact that Cu precursor cannot be reduced to metallic copper and the Cu content cannot exceed 50 %, we achieved the formation of the Pt? Cu alloy by using Cu UPD on the Pt surface. In addition, the catalytic activities of Pt? Cu alloy NCs with different composition were investigated in electrocatalytic oxidation of formic acid. The results reveal that the catalytic performance is strongly dependent on Pt? Cu alloy composition. The sample of Pt₅₀Cu₅₀ exhibits excellent activity in electrocatalytic oxidation of formic acid.     

A Rapid and Efficient Way to Dynamic Creation of Cross‐Reactive Sensor Arrays Based on Ionic Liquids

Based on the simple counterion exchange of ionic liquids, a rapid, facile, and efficient strategy to create a cross‐reactive sensor array with a dynamic tunable feature was developed, and exemplified by the construction of a sensor array for the identification and classification of nitroaromatics and explosives mimics. To achieve a good sensing system with fast response, good sensitivity, and low detection limit, the synthesized ionic liquid receptors were tethered onto a silica matrix with a macro‐mesoporous hierarchical structure. Through the facile anion exchange approach, abundant ionic‐liquid‐based individual receptors with diversiform properties, such as different micro‐environments, diverse molecular interactions, and distinctive physico‐chemical properties, were easily and quickly synthesized to generate a distinct fingerprint of explosives for pattern recognition. The reversible anion exchange ability further endowed the sensor array with a dynamic tunable feature as well as good controllability and practicality for real‐world application. With the assistance of statistical analysis, such as principal component analysis (PCA) and linear discrimination analysis (LDA), an optimized‐size array with a good resolution was rationally established from a large number of IL‐based receptors. The performed experiments suggested that the ionic‐liquid‐based sensing protocol is a general and powerful strategy for creating a cross‐reactive sensor array that could find a wide range of applications for sensing various analytes or complex mixtures.     

Microwave‐Induced In Situ Synthesis of Zn2GeO4/N‐Doped Graphene Nanocomposites and Their Lithium‐Storage Properties

Zn₂GeO₄/N‐doped graphene nanocomposites have been synthesized through a fast microwave‐assisted route on a large scale. The resulting nanohybrids are comprised of Zn₂GeO₄ nanorods that are well‐embedded in N‐doped graphene sheets by in situ reducing and doping. Importantly, the N‐doped graphene sheets serve as elastic networks to disperse and electrically wire together the Zn₂GeO₄ nanorods, thereby effectively relieving the volume‐expansion/contraction and aggregation of the nanoparticles during charge and discharge processes. We demonstrate that an electrode that is made of the as‐formed Zn₂GeO₄/N‐doped graphene nanocomposite exhibits high capacity (1463 mAh g^?1 at a current density of 100 mA g^?1), good cyclability, and excellent rate capability (531 mAh g^?1 at a current density of 3200 mA g^?1). Its superior lithium‐storage performance could be related to a synergistic effect of the unique nanostructured hybrid, in which the Zn₂GeO₄ nanorods are well‐stabilized by the high electronic conduction and flexibility of N‐doped graphene sheets. This work offers an effective strategy for the fabrication of functionalized ternary‐oxide‐based composites as high‐performance electrode materials that involve structural conversion and transformation.     

Design and Synthesis of Lipidic Organoalkoxysilanes for the Self‐Assembly of Liposomal Nanohybrid Cerasomes with Controlled Drug Release Properties

This paper reports the facile design and synthesis of a series of lipidic organoalkoxysilanes with different numbers of triethoxysilane headgroups and hydrophobic alkyl chains linked by glycerol and pentaerythritol for the construction of cerasomes with regulated surface siloxane density and controlled release behavior. It was found that the number of triethoxysilane headgroups affected the properties of the cerasomes for encapsulation efficiency, drug loading capacity, and release behavior. For both water‐soluble doxorubicin (DOX) and water‐insoluble paclitaxel (PTX), the release rate from the cerasomes decreased as the number of triethoxysilane headgroups increased. The slower release rate from the cerasomes was attributed to the higher density of the siloxane network on the surface of the cerasomes, which blocks the drug release channels. In contrast to the release results with DOX, the introduction of one more hydrophobic alkyl chain into the cerasome‐forming lipid resulted in a slower release rate of PTX from the cerasomes due to the formation of a more compact cerasome bilayer. An MTT viability assay showed that all of these drug‐loaded cerasomes inhibited proliferation of the HepG2 cancer cell line. The fine tuning of the chemical structure of the cerasome‐forming lipids would foster a new strategy to precisely regulate the release rate of drugs from cerasomes.     

Mechanism of Copper(I)‐Catalyzed Allylic Alkylation of Phosphorothioate Esters: Influence of the Leaving Group on α Regioselectivity

The mechanism of Cu^I‐catalyzed allylic alkylation and the influence of the leaving groups (OPiv, SPiv, Cl, SPO(OiPr)₂; Piv: pivavloyl) on the regioselectivity of the reaction have been explored by using density functional theory (DFT). A comprehensive comparison of many possible reaction pathways shows that [(iPr)₂Cu]^? prefers to bind first oxidatively to the double bond of the allylic substrate at the anti position with respect to the leaving group, and this is followed by dissociation of the leaving group. If the leaving group is not taken into account, the reaction then undergoes an isomerization and a reductive elimination process to give the α‐ or γ‐selective product. If OPiv, SPiv, Cl, or SPO(OiPr)₂ groups are present, the optimal route for the formation of both α‐ and γ‐substituted products changes from the stepwise elimination to the direct process, in which the leaving group plays a stabilizing role for the reactant and destabilizes the transition state. The differences to the energy barrier for the α‐ and γ‐substituted products are 2.75 kcal mol^?1 with SPO(OiPr)₂, 2.44 kcal mol^?1 with SPiv, 2.33 kcal mol^?1 with OPiv, and 1.98 kcal mol^?1 with Cl, respectively; these values show that α regioselectivity in the allylic alkylation follows a SPO(OiPr)₂>SPiv>OPiv>Cl trend, which is in satisfactory agreement with the experimental findings. This trend mainly originates in the differences between the attractive electrostatic forces and the repelling steric interactions of the SPO(OiPr)₂, SPiv, OPiv, and Cl groups on the Cu group.