Comparison of triel bonds with different chalcogen electron donors: Its dependence on triel donor and methyl substitution

The complexes between R₃Tr (Tr = B, Al, and Ga; R = H, F, Cl, and Br) and H₂X (X = O, S, and Se) were theoretically studied. The interaction energies of R₃Al⋯H₂X and R₃Ga⋯H₂X are consistent with the electronegativity of the halogen atom R (R ≠ H), but an opposite dependence is found for R₃B⋯H₂X. The triel bond of R₃Tr⋯H₂X is weaker for the heavier chalcogen donor. The dependence of triel bonding strength on the triel atom is complicated, depending on the nature of R and X. The methyl substitution of H₂X causes a substantial increase in the interaction energy from −5.74 kcal/mol to −22.88 kcal/mol, and its effect is relevant to the nature of Tr, X, and R groups. For the S and Se donors, the increased percentage of interaction energy is almost the same due to the methyl substitution, which is larger than that of the O analogue. In most triel-bonded complexes, electrostatic dominates and polarization has comparable contribution. However, polarization plays a dominant role in R₃B⋯ and R₃B⋯ (R = Cl and Br; R′ = H and Me).     

冰晶石-氧化铝熔体结构的计算机模拟研究

用Monte Carlo法对冰晶石-氧化铝系熔体结构作了计算机模拟研究。结果表明: 熔体中既有含“氧桥”和“氟桥”的“多核”离子集团, 如F3Al-O-AlF_3、F_3Al-AlF_3、F_3Al—F—AlF_3—F等; 也有“单核”离子集团如AlF_5~(2-)、AlOF_3~(2-)等。熔体中还存在较松散的xNa~+·yF~-离子集团。熔体中不存在AlO_2~-或AlO_3~(3-)集团。     

醇盐法制备稀土化合物超微粉末

稀土元素具有广泛的用途,在大多数的应用中其效果都与原料的纯度、粒度、粒经分布范围等因素有关。由于超微粉末的比表面积大、化学活性高,因此可以预料,若将稀土化合物制成超微粉末,会使它的催化性能及在各种材料中的性能有明显的改变,也可使稀土有新的、更高的应用价值。     

Synthesis, structure and magnetic properties of the S=1/2, one-dimensional antiferromagnet, Y5Re2O12

Single crystals of Y₅Re₂O₁₂ have been grown, and the crystal structure has been determined by X-ray diffraction. This compound crystallizes in space group C2/m with cell dimensions of a=12.4081(10) Å b=5.6604(5)Å, c=7.4951(6) Å, β=107.837(3)°, Z=2. The final refinement led to R1=0.0238, WR2=0.0459 for 1053 observed reflections with F>4σ(F₀). Edge-sharing ReO₆ octahedra form infinite linear [ReO₂O_4/2]_n chains along the b direction with alternating short and long Re-Re distances. Three crystallographically independent yttrium atoms surround O2 to form OY₄ tetrahedra, which share edges and corners in the ab plane to form a two-dimensional Y₅O₄ network which separates the [ReO₂O_4/2]_n magnetic chains. This compound is therefore isostructural with the series Ln₅Re₂O₁₂Ln=Gd-Lu, which have been known since 1969. The average Re oxidation state is +4.5 in the chains and a reasonable, if qualitative MO scheme results in one unpaired electron per Re dimer. Consistent with this, magnetic susceptibility data can be fitted to the one-dimensional antiferromagnetic Heisenberg model with S=1/2 and parameters J^intra/k=−89(1)K, g=2.15(4) and χ(TIP)=5(1)×10⁻⁴ emu/mol. There is no sign of long-range magnetic order down to 2 K. These results are contrasted with those for the isostructural Y₅Mo₂O₁₂.     

Use of deuterium–hydrogen exchange to characterize the fragmentation pathways of arteether and its metabolites in a thermospray mass spectrometer

Whereas the thermospray mass spectra of most compounds consist of only the pseudo-molecular ion with little fragmentation, the thermospray mass spectra of arteether (a cyclic endoperoxide) and its metabolites are relatively complex. Assignments of structures to individual fragments from normal spectra was particularly ambiguous because of uncertainties as to which fragments arose from ammonium ion or methanol adducts. In this study, these assignments could be resolved through the comparison of the regular spectrum with the deuterium-exchange spectrum (in an ND₄O₂CCH₃–CD₃OD–D₂O mobile phase) achieved using ‘sandwiched slug’ injection technique. The mass spectra of arteether and four of its metabolites all showed [M + ND₄]⁺ pseudo-molecular ions with greater than 91% H/D exchange, indicating a high efficiency with a minimal use of deuterated mobile phase. Most fragments showed H/D exchange rates in the 70–90% range and the isotope shift of individual spectral lines (ΔM) was found to be extremely useful in determining the structure of the fragment.     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

From D-glucose to biologically potent L-hexose derivatives: synthesis of alpha-L-iduronidase fluorogenic detector and the disaccharide moieties of bleomycin A2 and heparan sulfate

A novel and convenient route for the synthesis of biologically potent and rare L-hexose derivatives from D-glucose is described. Conversion of diacetone-alpha-D-glucose (14) into 1,2:3,5-di-O-isopropylidene-beta-L-idofuranose (19) was efficiently carried out in two steps. Orthogonal isopropylidene rearrangement of compound 19 led to 1,2:5,6-di-O-isopropylidene-beta-L-idofuranose (27), which underwent regioselective epimerization at the C3 position to give the L-talo- and 3-functionalized L-idofuranosyl derivatives. Hydrolysis of compound 19 under acidic conditions furnished 1,6-anhydro-beta-L-idopyranose (35) in excellent yield, which was successfully transformed into the corresponding L-allo, L-altro, L-gulo, and L-ido derivatives via regioselective benzylation, benzoylation, triflation and nucleophilic substitution as the key steps. Applications of these 1,6-anhydro-beta-L-hexopyranoses as valuable building blocks to the syntheses of 4-methylcoumarin-7-yl-alpha-L-iduronic acid and the disaccharide moieties of bleomycin A(2) as well as heparan sulfate are highlighted.     

Novel Chiral Aminophosphine Ligand:Synthesis and Application in Saymmetric Catalytic Hydrogenation Reaction

A new chiral aminophosphine ligand 6,6′-dimethoxy-2,2′-bis(diphenylphosphinoamino)biphenyl(DMBDPPABP) was prepared and its rhodium complex was found to be an effective catalyst for the asymmetric hydrogenation of amidoacrylic acid and its dervatives.The effects of solvent and reaction temperature on enantioselectivity were also studied.     

Microemulsion-mediated solvothermal synthesis of SrCO3 nanostructures

The controlled synthesis of SrCO3 nanostructures with different morphologies, such as rodlike, whiskerlike, ellipsoidlike, and spherelike, were successfully achieved by the cationic surfactant-CTAB-microemulsion-mediated solvothermal method. Various comparison experiments showed that fundamental experimental parameters, such as the molar ratio of H2O to CTAB and the concentration of reactants, played important roles in the morphological control of SrCO3 nanostructures. A lower molar ratio of H2O to CTAB favors rodlike products, whereas a higher molar ratio generally leads to the formation of spherical products. A rational mechanism based on fusion, aggregate, and coalescence of microemulsion droplets is proposed for the selective formation of various morphologies. X-ray powder diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and field-emission scanning electron microscope (FE-SEM) were used to characterize the products.     

Pt粒大小对PtNaY/HY体系氢溢出效应的影响

负载型金属催化剂的表面溢出效应(Spillover)是指吸附在金属上的物种可沿固体表面转移到担体上去的现象,是金属活性组分与担体相互作用的一个重要方面。近年来随着金属与担体之间强相互作用(SMSI)研究的逐渐深入,人们注意到溢出效应在SMSI中的重要作用。虽然提出溢出效应已有20多年的历史,并且人们采用不同的实验方法对此进行了广泛的研究,但对以分子筛为担体的负载型金属催化剂体系溢出效应的研究仍比较少。影