脱蜡剂DF-1的气相色谱-傅里叶变换红外光谱联用分析

脱蜡剂ＤＦ－１是一种含多种有机成分的碳氢化合物，经气相色谱－红外光谱联用分析后，确定了这些组分的组成与含量。     

碳酸氢铵沉淀法制备氧化钇粉体时反应条件对产物粒度的影响

研究了碳酸氢铵沉淀法的反应条件对氧化钇粒度的影响,探讨了粒度变化规律。发现在沉淀反应中,晶型碳酸钇铵的形成与否是影响氧化钇粒度的关键因素。在较低的反应温度下,当碳酸氢铵和氯化钇的浓度大于0.25mol·L-1,摩尔比大于5,陈化时间大于60min时得到碳酸钇铵沉淀,经煅烧可获得粒度(D50)大于1μm的氧化钇。当反应物浓度较低、摩尔比小,陈化时间较短时得到无定型碳酸钇沉淀,煅烧沉淀可获得粒度(D50)小于0.5μm的氧化钇。实验证明选择适当的沉淀反应条件,可制备D50在0.3～10μm范围内的不同粒度级别的氧化钇粉体。     

CdSe/ZnS-labeled carboxymethyl chitosan as a bioprobe for live cell imaging

A simple and convenient method for the construction of CdSe/ZnS-labeled polysaccharides as bioprobes were developed, which are highly biocompatible and photostable, and have been proven to be suitable for live cell imaging.     

大肠杆菌有限生长的微量热及非线性动力学研究

The finite growth of Escherichia coli was studied by using a LKB 2277 BioActivity Mollitor. We found that the finite growth is a nonliear dynamic process. The nonlinear dynamic behaviour in the finite growth process and the nonlinear dynamic models describing the process were discovered and established. The curve of logistic map corresponding to the finite growth thermogram of Escherichia coli was obtained and the nonlinear dynamic parameters were calculated by means of a computer. Moreover, we also discussed the nonlinear dynamic characters of Escherichia colt in its finite growth process.     

Simultaneous EQCM and diffuse reflectance UV-visible spectroelectrochemical measurements: poly(aniline-co-o-anthranilic acid) growth and property characterization

Piezoelectric diffuse reflectance spectroelectrochemistry (PDRSEC), a new technique of diffuse reflectance spectroelectrochemistry (DRSEC) in combination with electrochemical quartz crystal microbalance (EQCM), was developed to study the electrochemical copolymerization of aniline and o-anthranilic acid in 1.0 mol l(-1) HClO4 and the properties of these copolymers. The DRSEC using an integral sphere was proven to possess a higher optical sensitivity at the unpolished piezoelectric quartz crystal electrodes used than the mirror reflectance spectroelectrochemistry mode. The copolymers grown from the copolymerization bath of different molar fractions of o-anthranilic acid (F1, relative to the total amount of the two monomers) showed intermediate properties between those of the homopolymers, which varied gradually with F1. The swelling/dissolution behavior of the copolymers vs solution pH was traced via the EQCM frequency and resistance signals, and its large dependence on F1 was found and discussed. In a HAc-NaAc buffer solution at pH 5.6, the amount of adsorbed lysozyme was found to be positively correlated with F1, via an EQCM impedance investigation, demonstrating the feasibility of using poly(aniline-co-o-anthranilic acid) as a load-adjustable immobilization matrix for cationic proteins. The novel PDRSEC method proposed is highly recommended for surface electrochemistry studies at relatively rough electrodes.     

共沉淀CuO-ZrO2复合氧化物分散态结构研究

用XRD、EXAFS、XPS表征了共沉淀法制备的CuO-ZrO2复合氧化物的分散态结构. 500 ℃焙烧的样品在一定组成范围内形成大体均匀的无定形态固溶体. CuO含量超过其在ZrO2中溶解度时，多余的CuO以CuO晶体形式存在；当ZrO2含量超过其在CuO中溶解度时，多余的ZrO2以四方相ZrO2晶体形式存在.焙烧温度达到800 ℃时，样品由单斜相ZrO2和CuO晶体组成.     

Comparative X-ray photoelectron spectroscopic study on the desulfurization of thiophene by Raney nickel and rapidly quenched skeletal nickel

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.     

Preparation and electrochemistry of azobenzene self-assembled monolayers on gold--long range tunneling and end-group hydrogen bonding effect

A series of thiol-functionalied azobenzene derivatives (RAzoCnSH: R=H for n=3-6, abbreviated as AzoCnSH; R=CH(3)CONH for n=4, abbreviated as aaAzoC4SH) on gold electrodes were prepared and their self-assembly and electrochemical properties were studied by cyclic voltammetry. They all formed uniform and reproducible self-assembled monolayers (SAMs) on gold and showed well-behaved voltammetric responses in aqueous solution. Both the length of the alkyl chain spacer and the H-bonding of the end acetamino group had effects on the stability and the electrochemical kinetics of the SAMs, and the effect of the H-bonding was dominant. The surface coverage of the SAMs (AzoCnSH) is gradually increased with an increase of the alkyl chain spacer length, whereas the presence of the terminal acetamino group leads to a greater increase of the surface coverage. At a low scan rate, voltammetric responses corresponding to an irreversible two-electron, two-proton reduction/oxidation of the trans-azobenzene redox center were obtained in the range of +300 mV and -800 mV, which exhibited very large peak-to-peak splitting. At a high scan rate of 500 mV/s, two steps of reversible one-electron, one-proton reduction/oxidation corresponding to the cis-isomer in azobenzene-thiol SAMs (n is odd) was clearly observed between +300 and -200 mV. The apparent electron-transfer rate is decreased with increasing distance between the azobenzene redox center and the gold electrode. The existence of the end acetamino group which restricted the conformational change during the redox process also led to a decrease of the standard rate constant, and this restriction effect is more predominant than the distance effect.