不同衬底和CdCl2退火对磁控溅射CdS薄膜性能的影响

在科宁7059玻璃, FTO, ITO, AZO四种衬底上磁控溅射CdS薄膜, 并在CdCl₂+干燥空气380 ℃退火, 分别研究了不同衬底和退火工艺对CdS薄膜形貌、结构和光学性能的影响. 扫描电子显微镜形貌表明: 不同衬底原位溅射CdS薄膜的形貌不同, 退火后相应CdS薄膜的晶粒度和表面粗糙度明显增大. XRD衍射图谱表明: 不同衬底原位溅射和退火CdS薄膜均为六角相和立方相的混相结构, 退火前后科宁7059玻璃, FTO, AZO衬底上CdS薄膜有 H(002)/C(111) 最强衍射峰, ITO衬底原位溅射CdS薄膜没有明显的最强衍射峰, 退火后出现 H(002)/(111) 最强衍射峰. 紫外-可见分光光度计分析表明: AZO, FTO, ITO, 科宁7059玻璃衬底CdS薄膜的可见光平均透过率依次减小, 退火后相应衬底CdS薄膜的可见光平均透过率增大, 光学吸收系数降低; 退火显著增大了不同衬底CdS薄膜的光学带隙. 分析得出: 上述结果是由于不同衬底类型和退火工艺对CdS多晶薄膜的形貌、结构和带尾态掺杂浓度改变的结果. 关键词： CdS薄膜 磁控溅射 退火再结晶 带尾态     

基于光声光谱技术的NO,NO2气体分析仪研究

NO, NO₂是大气污染源中的常见气体, 对环境具有严重的危害性. 为检测污染源中这两种气体的浓度, 构建了成本较低的基于红外热辐射光源的光声光谱气体检测系统. 分析计算得到了NO, NO₂ 在2500–6667 nm波段吸收谱线. 通过建立光声传输线RLC振荡电路模型和仿真得到品质因数、声压大小与谐振腔长、内腔半径以及调制频率的关系, 据此设计了光声池几何结构. 实验表明该系统所测得的光声信号与气体浓度有很好的线性关系, 并且对NO, NO₂气体极限检测灵敏度分别达到4.01 和1.07 μL. 通过调节激光发射波长和选取滤波片, 该系统还可用于其他微量气体的浓度检测. 关键词： 大气污染 光声光谱 气体检测     

Gd complexes of diethylenetriaminepentaacetic acid conjugates of low-molecular-weight chitosan oligosaccharide as a new liver-specific MRI contrast agent

This study was to describe the synthesis of complexes of gadolinium diethylenetriaminepentaacetic acid conjugates of low-molecular-weight chitosan oligosaccharide Gd-DTPA-CSn (n = 6, 8, 11) as a new class of contrast agent as well as its magnetic property in a pilot magnetic resonance imaging. The efficacy of the contrast agent was assessed by measuring the longitudinal relaxivity (r₁), FLASH imaging in phantoms in vitro and signal intensity in vivo of the rat abdominal axial imaging. The r₁ of Gd-DTPA-CS₁₁ was up to 11.65 mM^− 1·s^− 1, which was 3 times higher than that of the analogous MRI contrast agent Gd-DTPA in commercial use. In vivo MR images of rat obtained with Gd-DTPA-CS₁₁ showed strong signal enhancement in liver and the vessels of the liver parenchyma during the extended period of time. The present study suggests that the new synthesized gadolinium complexes can be used as a new class of practical liver-specific MRI contrast agent because of its superior performance compared with Gd-DTPA.     

基于高斯伪谱方法的混沌系统最优控制

针对混沌系统最优控制问题,提出一种基于高斯伪谱方法的数值求解新算法. 首先在勒让德-高斯点上构造Lagrange插值多项式并近似表示混沌系统最优控制中的状态变量和控制变量;接着将连续空间的最优控制问题转化为非线性规划问题;然后通过序列二次规划（SQP）算法获得最优解;最后对三个典型混沌系统的仿真实验结果表明,新方法能有效和快速地实现混沌系统的最优控制. 关键词： 混沌系统 最优控制 高斯伪谱法 非线性规划     

Precursor Based on Polyborylborazine for BN Fiber: Preparation and Rheology Properties

A polyborylborazine precursor for hexagonal boron nitride (h-BN) was obtained by reaction of boron trichloride with methylamine and its structure was characterized by ¹¹BNMR, ¹³CNMR, ¹HNMR, and FTIR. The results show that the molecular precursor consists of borazine rings connected via a cross-linked network. The results of shear rheological tests indicated that the polymer is capable of being melt spun at moderate temperature, which implies that the structure of the molecular chains of the precursor polymer is branched. The precursor polymer was spun into a continuous polymer fiber in the melt state and then subsequently heat-treated under NH₃ up to 1000°C for conversion into BN fibers. Its surface morphology was observed by scanning electron microscopy (SEM); the fiber was free of defects and cavities.     

Effect of Temperature and Comonomer Content on Thermal Behavior and Crystallization Property of the Propylene–Ethylene Random Copolymers

The effects of ethylene units content and crystallization temperature on the conformations, and the thermal and crystallization behavior were investigated by a combination of Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). The characterization of FTIR spectroscopy proves that the longer helical conformation sequences of the propylene–ethylene random (PER) samples decrease, whereas the shorter helical conformation sequences increase with the increase in ethylene units content. The increase of the shorter helical conformation sequences is favorable for the formation of the γ-phase in the crystals. A group of broad endothermic peaks can be seen clearly in the DSC curves of PER copolymers, which may be associated with the melting of mixtures of the α- and γ-forms in the crystals. The melting point, crystallization temperature, and crystallinity degree of the PER copolymers decrease with the increase in ethylene units contents. Three typical melting peaks of the PER copolymers crystallized isothermally between 80°C and 130°C were observed. The two higher melting peaks result from melting of the α- and γ-phase in the crystals, whereas the materials crystallized on quenching give the lowest peak. The WAXD results confirm that the PER copolymers crystallize from the melt, as mixtures of α and γ forms, in a wide temperature range. The critical number ζ_lim of the crystallizable units for the α-form increases with the increase in crystallization temperature for PER copolymers, which is favorable for the formation of the γ phases. The amount of γ-form increases with the increase in crystallization temperature at the expense of its α component, then reaches a maximum value at the crystallization temperature of 115°C, and finally decreases with further increase in the crystallization temperature.     

Hybrid Particle–Continuum Simulations of Polymer Brushes in Shear Flow

A hybrid particle–continuum method is used to study the shear flow confined between two opposing walls, one of which is coated with polymer chains. Molecular dynamics (MD) is used in the particle region near the brush and Navier–Stokes (NS) equations are applied in the remaining region where the continuum assumption holds. The information exchange from the continuum region to the particle region is implemented using the constrained particle dynamics. Both Couette shear flow and oscillatory flow are considered in the present work. The effect of the shear flow on the conformational characteristics of polymer brushes is analyzed. In the overlap region, the velocities obtained from MD simulations are smoothly connected with those from NS equations. Our investigations demonstrate that the hybrid particle–continuum model is valid in exploring the shear behavior of polymer brushes.     

Modified Spectral Neugebauer Model for Printer Characterization

Spectral Neugebauer model is widely used for spectral reflectance prediction during printer characterization. However, several factors reduce the predication precision. Thus, an improved cellular Yule-Nielson spectral Neugebauer (CYNSN) model is proposed, which modifies the traditional spectral Neugebauer model in three main aspects: (1) First, in order to adjust the nonlinearities between the predicated and measured spectral reflectance, an iteratively calculated Yule-Nielson exponent is added to the reflectance values within the Neugebauer equations. (2) Second, the quantity of Neugebauer primaries is increased by dividing the CMY colorant space into 4³ uniform cellular subdomains. (3) Third, the mapping functions are developed to map the area coverages' theoretical values to their effective values within the subdomains, and the mapped values highly improve the matching degree of the predicated and measured reflectance values. In the experiment, four related spectral Neugebauer models are employed during printer characterization, which are the traditional spectral Neugebauer model, Yule-Nielson spectral Neugebauer (YNSN) model, traditional CYNSN model, and the modified CYNSN model, respectively. And the experimental results show the modified CYNSN model yields a significant improvement over the other spectral Neugebauer models, by comparing the characterization errors in the form of colorimetry and spectroscopy.     

Investigation of formation mechanism of Ti3SiC2 by high pressure and high-temperature synthesis

ABSTRACT

In this paper, synthesis of titanium silicon carbide (Ti₃SiC₂) under high pressure and high-temperature condition has been investigated by using the reactant systems Ti/Si/C, Ti/SiC/TiC, Ti/SiC/C and Ti/TiC/Si. Results reveal that Ti/TiC/Si is unsuited to the synthesis of Ti₃SiC₂ under a high pressure of 2.0?GPa, while an elemental mixture of Ti/Si/C is applicable. By the addition of Al, Ti₃SiC₂ with 95.8?wt% purity was obtained from elemental mixture with a large excess of silicon. The optimum experimental parameters were determined as Ti/Si/Al/C having the molar ratio of 3:1.5:0.5:1.9, holding at 2.0?GPa and 1300?°C for 60?min.     

Effects of γ rays irradiation on structure and property of TiO2 thin films

TiO₂ thin films were deposited on a glass substrate by the radio frequency magnetron sputtering method, and annealed for 2 h at temperatures of 550°C. Then, ⁶⁰Co γ rays with different doses were used to irradiate the resulting TiO₂ thin films. The surface features of films before and after irradiation were observed by scanning electron microscope (SEM). Simultaneously, the crystal structure and optical properties of films before and after irradiation were studied by X-ray diffraction (XRD), UV–VIS transmission spectrum and Photoluminescence (PL) spectrum, respectively. The SEM analysis shows that the film is smooth with tiny particles on the film surface, and non-crystallization trend was clear after irradiated with γ rays. The XRD results indicated that the structure of the film at the room temperature mainly exists in the form of amorphous and mixed crystal at a sputtering power of 200 W, and non-crystallinity was more obvious after irradiation. Obvious difference can be found for the transmissibility of the irradiated and pre irradiation TiO₂ films by the UV-VIS spectra. The color becomes light yellow, and the new absorption edge also appeared at about 430 nm. PL spectra and photocatalysis experiments indicate that the photocatalysis degradation rate of the TiO₂ films on methylthionine chloride solution irradiated with the maximum dose can be increased to 90%.