基于微结构损伤的珠光体材料本构行为研究

珠光体材料由许多随机取向的珠光体团组成,每一珠光体团又由铁素体片和渗碳体片交替 叠合而成. 实验表明具有较小片层间距的珠光体材料具有较高的强度和寿命. 通过分析构成 珠光体团的各相及界面的损伤特征,利用损伤耗散功的概念,得到了铁素体、渗碳体与界面 损伤的具有统一形式的演化规律,将其嵌入基于细片层微结构和非经典塑性理论的珠光体团 的弹塑性本构方程,利用Hill自洽方法,得到了珠光体材料的损伤本构描述. 所得到的损 伤本构描述显含表征微结构特征的片层间距,容易证明具有较小片层间距的珠光体材料具有 较好的综合力学性能. 对珠光体材料的拉伸和循环拉压特性进行了分析,得到了与实验一 致的结果.     

Unusual Normal and Superconducting State Properties Observed in Hydrothermal Fe_(1-δ)Se Flakes

The electronic and superconducting properties of Fe_(1-δ)Se single-crystal flakes grown hydrothermally are studied by the transport measurements under zero and high magnetic fields up to 38.5 T. The results contrast sharply with those previously reported for nematically ordered Fe Se by chemical-vapor-transport(CVT) growth. No signature of the electronic nematicity, but an evident metal-to-nonmetal crossover with increasing temperature,is detected in the normal state of the present hydrothermal samples. Interestingly, a higher superconducting critical temperature T_c of 13.2 K is observed compared to a suppressed T_c of 9 K in the presence of the nematicity in the CVT Fe Se. Moreover, the upper critical field in the zero-temperature limit is found to be isotropic with respect to the field direction and to reach a higher value of ~42 T, which breaks the Pauli limit by a factor of 1.8.     

An Encryption Algorithm for Region of Interest in Medical DICOM Based on One-Dimensional eλ-cos-cot Map

Today, with the rapid development of the Internet, improving image security becomes more and more important. To improve image encryption efficiency, a novel region of interest (ROI) encryption algorithm based on a chaotic system was proposed. First, a new 1D eλ-cos-cot (1D-ECC) with better chaotic performance than the traditional chaotic system is proposed. Second, the chaotic system is used to generate a plaintext-relate keystream based on the label information of a medical image DICOM (Digital Imaging and Communications in Medicine) file, the medical image is segmented using an adaptive threshold, and the segmented region of interest is encrypted. The encryption process is divided into two stages: scrambling and diffusion. In the scrambling stage, helical scanning and index scrambling are combined to scramble. In the diffusion stage, two-dimensional bi-directional diffusion is adopted, that is, the image is bi-directionally diffused row by column to make image security better. The algorithm offers good encryption speed and security performance, according to simulation results and security analysis.     

磁控溅射制备的W,WSi2,Si单层膜和W/Si,WSi2/Si多层膜应力

采用直流磁控溅射技术制备了厚度约100 nm的W,WSi2,Si单层膜和周期约为20 nm,Si膜层厚度与周期的比值为0.5的W/Si,WSi2/Si周期多层膜.利用台阶仪对镀膜前后基底表面的面形进行了测试,计算并比较了不同膜系的应力值.结果表明:W单层膜表现出较大的压应力,而W/Si周期膜则表现为张应力.WSi2单层...     

Mo/Si aperiodic multilayer broadband reflective mirror for 12.5-28.5-nm wavelength range

Aperiodic molybdenum/silicon (Mo/Si) multilayer designed as a broadband reflective mirror with mean reflectivity of 10% over a wide wavelength range of 12.5-28.5 nm at incidence angle of 5° is developed using a numerical optimized method. The multilayer is prepared using direct current magnetron sputtering technology. The reflectivity is measured using synchrotron radiation. The measured mean reflectivity is 7.0% in the design wavelength range of 12.5-28.5 nm. This multilayer broadband reflective mirror can be used in extreme ultraviolet measurements and will greatly simplify the experimental arrangements.     

全无机钙钛矿太阳电池的制备及稳定性

全无机钙钛矿太阳电池因其热稳定性好、载流子迁移率高,可用于制备叠层电池等优点备受关注.随着人们对全无机钙钛矿太阳电池的深入研究和制备工艺的持续优化,全无机钙钛矿太阳电池的光电转换效率已经突破19％.然而,全无机钙钛矿材料相稳定性较差,这使得实现全无机钙钛矿太阳电池在空气环境下制备和长期使用面临巨大挑战.众多科研工作者通...     

The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition

To investigate the influencing rules of the variations of powder and laser defocusing distance on surface quality and obtain the smooth surface of parts in laser direct metal deposition, the thin-walled metal parts were fabricated under three different powder defocusing distances and three different laser defocusing distances conditions. The experimental results show that a high surface quality can be obtained with the powder focussed below the substrate and laser focussed above the substrate process, and the variation in which the powder focus moves from above to below the melt pool plays a leading role and the variation in which the laser focus moves from above to below the melt pool plays a supplementary role in the influence on the surface quality. To explain the experimental results, a simple model of the track height is established.     

On the Hamming distances of repeated-root constacyclic codes of length 4ps

Let $p$ be an odd prime, $s$, $m$ be positive integers, $\gamma ,\lambda$ be nonzero elements of the finite field ${\mathbb{F}}_{p^m}$ such that ${\gamma }^{p^s}=\lambda$. In this paper, we show that, for any positive integer $\eta$, the Hamming distances of all repeated-root $\lambda$-constacyclic codes of length $\eta p^s$ can be determined by those of certain simple-root $\gamma$-constacyclic codes of length $\eta$. Using this result, Hamming distances of all constacyclic codes of length $4p^s$ are obtained. As an application, we identify all MDS $\lambda$-constacyclic codes of length $4p^s$.