Monte Carlo simulation of nitriding in iron by a mixing technology with laser and plasma beams

A program is modeled to describe nitriding depth by a new mixing laser and plasma beams nitriding (LPN) technique. The model extends the transport of ions in matter (TRIM) program by adding temperature and energy factors into the energy function. The nitriding depths and nitrogen distribution in substrate were calculated by Monte Carlo program. There is a good agreement between calculation and experiment results at different laser energy intensities, scanning velocities and nitrogen ion energies respectively. Moreover, the nitriding process diagrams by LPN technique are shown from calculation results.     

Accumulation effect of SiO_2 protective layer on multi-shot laser-induced damage in high-reflectivity HfO_2/SiO_2 coatings

The accumulation effects in high-reflectivity(HR) HfO2/SiO2 coatings under laser irradiation are investigated.The HR HfO2/SiO2 coatings are prepared by electron beam evaporation at 1 064 nm.The laser-induced damage threshold(LIDT) are measured at 1 064 nm and at a pulse duration of 12 ns,in 1-on-1 and S-on-1 modes.Multi-shot LIDT is lower than single-shot LIDT.The laser-induced and native defects play an important role in the multi-shot mode.A correlative theory model based on critical conduction band electron density is constructed to elucidate the experimental phenomena.     

Effect of stearic acid, zinc stearate coating on the properties of synthetic hydromagnesite

Synthetic hydromagnesite (SHM), used as flame retardant for polymers, may have similar or better flame retardancy effectiveness than aluminum tri-hydroxide (ATH) and magnesium di-hydroxide (MDH). Suitable surface modifiers are often employed to improve its dispersion and compatibility with polymer matrix. In this study, we chose stearic acid (SA) and zinc stearate (ZS) as the surface modifier, and investigated the properties of SHM modified with various surface modifier content using dry blending coating process. Scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry (TG), particle size distribution, contact angle, oil absorption, bulk density, tapped density and Carr's index were employed to characterize the effect of surface modification. The results showed that the surface of SHM powders was changed from hydrophilic to lipophilic. The flowability of the surface modified powder was also improved. TG graphs showed that the surface modifier had no obvious influence on the degradation pathway of the SHM.     

Nanosecond laser ablation and deposition of silicon

Nanosecond-pulsed KrF (248 nm, 25 ns) and Nd:YAG (1064 nm, 532 nm, 355 nm, 5 ns) lasers were used to ablate a polycrystalline Si target in a background pressure of <10⁻⁴ Pa. Si films were deposited on Si and GaAs substrates at room temperature. The surface morphology of the films was characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). Round droplets from 20 nm to 5 μm were detected on the deposited films. Raman Spectroscopy indicated that the micron-sized droplets were crystalline and the films were amorphous. The dependence of the properties of the films on laser wavelengths and fluence is discussed.     

某光电雷达稳定平台关键部件转板的动态特性分析

 转板是光电雷达稳定平台的关键元件之一。为了更好地设计和分析某光电雷达稳定平台的转板,运用Pro E软件对其进行三维实体建模,合理简化后,进入Ansys软件界面建立有限元模型。应用有限元理论和Ansys软件对其进行动态特性分析,得到了转板前八阶模态的固有频率和振型,以及要求范围内的谐响应。对比了不同方法划分网格的网格质量,采取不同材料得到了不同模态。分析结果表明：设计的转板在关心的频段0~50 Hz,2 000 Hz~8 000 Hz内不发生共振,符合设计要求。     

Growth of cubic MgxZn1−xO alloy films by electron beam evaporation

We report the growth of cubic Mg_xZn_1−xO alloy thin films on quartz by electron beam evaporation. It can be found that all the samples have sharp absorption edges by the absorption measurements. X-ray diffraction measurements indicate the Mg_xZn_1−xO films are cubic phase with preferred orientation along the (1 1 1) direction. Energy dispersive spectrometry (EDS) demonstrates that the Mg concentration in Mg_xZn_1−xO films is much higher than the ceramic target used, and the composition can be tuned in a small scope by varying the substrate temperature and the beam electric current. The reasons of this phenomenon are also discussed.     

表面活性剂增敏光度法测定锌

在弱酸性(pH=4.5)介质中,非离子表面活性剂Tween-80存在下,7-(苯并噻唑-2-偶氮)-8-羟基喹啉-5-磺酸(BTAQS)与锌形成2:1的紫色配合物,最大吸收波长位于580nm处,表观摩尔吸光系数为7.4×104L·mol-1·cm-1,锌含量在0-6μg/25mL范围内符合比耳定律。测定矿样中的锌,结果满意。     

“天光”一号MOPA系统光学元件加工与镀膜的进展

本文阐述了在中国原子能科学研究院“天光一号”ＫｒＦ激光核聚变实验装置上，ＭＯＰＡ系统光学元件加工与镀膜研究工作的进展。实验测量结果表明，加工后的基片表面均方根粗糙度对于Ｋ９光学玻璃与熔融石英玻璃来说分别为σｒｍｓ＝１．８±０．５ｎｍ，σｒｍｓ＝２．０±０．４ｎｍ。镀ＨｆＯ２／ＳｉＯ２高反射膜的光学元件的反射率与破坏阈值分别为Ｒ＞９９．５％，Ｅｔｈ＝１．３０～１．３３Ｊ／ｃｍ２。镀Ａｌ２Ｏ３／ＭｇＦ２增透膜的光学元件的透射率与破坏阈值分别为Ｔ＞９９．５％，Ｅｔｈ＝１．３～１．９７Ｊ／ｃｍ２。     

用等厚干涉测定液体折射率

介绍一种采用等厚干涉原理测定液体折射率的简单可靠的方法。