广义Hénon映射的滑模变结构控制同步

基于可线性化的非线性离散变结构跟踪控制方法实现了广义Hénon映射混沌系统的同步.广义Hénon映射的混沌吸引子比Hénon映射的混沌吸引子要复杂得多,对于保密通信来说,这种复杂性正是所期望的.提出的同步方法允许参数有适当的失配程度,这对工程实现是非常有利的,理论分析和仿真结果证实了该方法的有效性 关键词： 广义Hénon映射 混沌 同步 变结构控制     

Piezooptical optical bistability

A glass fiber piezooptical optical bistability device is reported.Basing on pho-toelastic and strain effects of single-mode fiber,we have realized piezooptical modulation andperformed experiments of optical bistability.     

Scholte波与含泥沙两相流介质属性关系的分析及仿真验证

基于四种超声悬浮液模型Urick, Urick-Ament, HT, Mcclements分析了Scholte波在两相流体与多孔介质固体界面处的传播特性. 结合各模型的复波数表达式建立含泥沙流体-多孔介质固体界面波特征方程, 分析了Scholte波速与两相流体积含量、粒径等介质属性的关系. 通过仿真实验获得界面波信号, 运用时延估计获得Scholte波速与泥沙含量、粒径的关系, 发现所得的波速与Urick-Ament和HT理论有相对好的一致性. 关键词： Scholte波 两相流体 多孔介质 泥沙含量     

Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer

A series of polyamide 6/hyperbranched polymers (PA6/HBP) blends with different HBP contents was prepared by melt processing using a twin-screw extruder. The HBP was synthesized on the basis of pentaerythritol and dimethyl terephthalate according to a one-step method. The melt flow behavior, crystallization behavior, morphology, and mechanical properties of the PA6/HBP blends were investigated. The results showed that the melt flow index of the blends was greatly improved by a small amount of HBP. The yield strength, tensile modulus, Izod impact strength, and flexural strength of samples were simultaneously enhanced from 54.6 MPa, 0.5 GPa, 3.8 kJ/m², 56.9 MPa for pure PA6 to 61.1 MPa, 0.7 GPa, 5.3 kJ/m², 67.1 MPa for PA6 blends with 2.0 wt% HBP, respectively. The PA6/HBP blends showed the higher content of α-form crystal and a higher degree of crystallinity than those of pure PA6.     

Reactive Compatibilization of Poly(Butylene Terephthalate)/Acrylonitrile-Styrene-Acrylate Blends by Epoxy Resin: Morphology and Mechanical Properties

The effect on the notched Izod impact strength of poly(butylene terephthalate) (PBT) by blending it with acrylonitrile-styrene-acrylate (ASA) was examined. Epoxy resin (ER) was demonstrated to be an efficient compatibilizer for the partially compatible blends of PBT/ASA. It requires only a very small amount of ER to improve the toughness of the PBT/ASA blends drastically. Furthermore, there exists an optimum proportion of ER added to achieve maximum notched Izod impact strength. Transmission electron microscopy (TEM) observation suggests that the ER in the PBT/ASA/ER blends suppressing the tendency of coalescence of ASA, leading to better dispersion of the ASA particles. Field emission scanning electron microscopy (FESEM) shows that ER enhances the phase dispersion and the interfacial adhesion between the PBT and ASA phases, it improves the compatibility between PBT and ASA. The compositions in the interphase was continuous, which results in multiphase composites with a graded interphase. It is suggested that enhanced interphase adhesion was necessary to obtain improved dispersion, fine phase morphology, and better toughness.     

Modeling natural gas market volatility using GARCH with different distributions

In this paper, we model natural gas market volatility using GARCH-class models with long memory and fat-tail distributions. First, we forecast price volatilities of spot and futures prices. Our evidence shows that none of the models can consistently outperform others across different criteria of loss functions. We can obtain greater forecasting accuracy by taking the stylized fact of fat-tail distributions into account. Second, we forecast volatility of basis defined as the price differential between spot and futures. Our evidence shows that nonlinear GARCH-class models with asymmetric effects have the greatest forecasting accuracy. Finally, we investigate the source of forecasting loss of models. Our findings based on a detrending moving average indicate that GARCH models cannot capture multifractality in natural gas markets. This may be the plausible explanation for the source of model forecasting losses.     

风机封闭系统内噪声模拟分析

风机系统工作时的一个突出问题是其进风口和出风口产生的噪声。由于风机流场非常复杂,以及实验成本、实验条件限制,基于计算流体力学（Computational Fluid Dynamics, CFD）的理论逐渐成为风机噪声估计的重要方法。本文拟通过对由风机及其冷却系统构成的封闭系统进行数值建模和仿真,判断出风机主要气动噪声源的位置和种类,为处于封闭系统内的风机的噪声大小预测,提供一个可供参考的信息。结果表明：风机出口腔体内部非定常压力波动强度最大。     

原子──分子离子反应N＋NH~＋（0，0）→N_2（V’，j’）＋H~＋的准经典轨线的研究

用准经典轨线法研究原子－原子离子反应Ｎ＋ＮＨ＋（０，０）→Ｈ＋＋Ｎ２（ｖ’，ｊ’）。这是一个放能的无阈能反应，且存在平均振动能随初始平动能升高而线性下降的特点。基于对势能面的分析，成功地解释了反应机理。     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

3种黄酮醇类化合物核磁共振碳谱的理论研究

在B3LYP/6-31G水平下优化了3种黄酮醇类（山奈酚,槲皮素,杨梅素）化合物的几何构型. 在振动分析中,均未出现虚频率. 在B3LYP/6-31G的水平下计算了该类化合物的核磁共振碳谱. 研究结果表明：3种分子均有分子内氢键形成,且分子内氢键的键长为0.17~0.18 nm左右 . 本文讨论了羟基引入之后对邻近C的化学位移的影响. 从取代基对NMR的影响来看,随着取代基对苯环的供电子能力的加强,取代基邻近的一些C的化学位移有所改变. 