CO在Pd／ZrO2—Al2O3催化剂上表面反应性能的研究

用流动反应法和ＴＰＳＲＭＳ等技术研究了ＣＯ在Ｐｄ／γＡｌ２Ｏ３和含有ＺｒＯ２的催化剂上的吸脱附行为、表面反应及催化氧化活性，同时用ＸＲＤ技术测定了催化剂的物相结构。结果表明，在Ｐｄ／γＡｌ２Ｏ３催化剂中用浸渍法添加ＺｒＯ２或掺杂超细ＺｒＯ２后，催化剂的氧化活性均有明显提高；ＣＯＴＰＳＲ的实验结果表明，ＣＯ在氧化态Ｐｄ催化剂上程序升温脱附过程中主要与表面氧发生氧化反应，而在还原态Ｐｄ催化剂上发生歧化反应，并发现ＣＯ２的脱附量及脱附峰温次序与对ＣＯ的氧化活性有一致的对应关系。     

ZrO2对Mn—O／γ—Al2O3催化剂中表面氧性能的影响

用ＴＰＤ－ＭＳ和ＴＰＲ技术研究了Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３和Ｍｎ－Ｏ／ＺｒＯ＋γ－Ａｌ２Ｏ３催化剂中表面氧的脱附、还原性能和再生氧化恢复性能，并用ＸＲＤ对催化剂的固相结构进行了表征。结果表明，Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３或Ｍｎ－Ｏ／ＺｒＯ２＋γ－Ａｌ２Ｏ３催化剂上存在ＭｎＯ２、Ｍｎ２Ｏ３和少量Ｍｎ３Ｏ４物种。ＺｒＯ２的存在不影响Ｍｎ－Ｏ／γ－Ａｌ２Ｏ３的ＴＰＲ的ＴＰＤ的特征峰，但使ＭｎＯ２的量明显增加，     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Synthesis and characterization of second-order nonlinear optical polyurethane with high thermal stability

A second-order nonlinear optical polyurethane was formed with an X-type multi-dimensional charge-transfer (CT) chromophore (DNPIPDHPI) and 3,3^′-dimethoxy-4,4^′-diphenyl diisocyanate. Simultaneous poling and polymerization and in situ second harmonic generation (SHG) measurement technique was carried on to evaluate the thermal stability of the poling induced orientation. The SHG signal of the poled polymer film was not decay below 150 °C and remains 90% of relative d₃₃ value at 200 °C, which is better than the results reported in literature. Comparison of thermal stability indicates that the X-type chromophores possess better property in controlling the decay of the SHG activity than classic chromophores.     

Bimetallic reactivity. On the use of oxadiazoles as binucleating ligands

Two (1,3,4)-oxadiazole ligands have been prepared. In one case the oxadiazole ring is flanked by two o-aniline groups, and in the other case it is an extension of the first where the amines are condensed with 2-picolyl groups. A monometallic copper(II) complex of the former has been prepared, and its crystal structure was determined. A number of bimetallic copper(II), cobalt(II), and nickel(II) complexes of the di-deprotonated latter ligand were prepared and isolated. The crystal structure of the cobalt(II) complex bearing two acetate bridges is reported. The work demonstrates that the seldom-employed oxadiazole ring can be used effectively for generating bimetallic complexes.     

分解水制氢的KNO3—I2循环之研究：Ⅲ.代替电解反应的一个子循环

本文提出了一个硫酸中间盐子循环用以代替分解水制氢的KNO_3-I_2混合循环中的电解反应,从而使原混合循环变为一个纯热化学循环。     

微量热法研究γ-Mo2N催化剂表面氢的微分吸附热

Differential heats of H 2 adsorption on γ-Mo2N catalysts were studied by using microcalorimetry. Samples with high and medium surface areas (90 and 17 m2•g -1 ) present a homogeneous energetic distribution of surface sites, which corresponds with the preferential orientation of their (200) planes. Molybdenum nitride with low surface area (8 m2•g -1 ) displays a heterogeneous energetic distribution of H 2 adsorption sites. The higher initial differential heat of hydrogen adsorption observed for the low surface Mo nitride was attributed to species adsorbed on surface sites associated with the (111) plane.     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

Hydrogenated polybutadiene–polymethyl methacrylate (HPB–PMMA) block copolymer. I. Synthesis of polybutadiene–polymethyl methacrylate (PB–PMMA) block copolymer

To get hydrogenated polybutadiene-polymethyl methacrylate (HPB-b-PMMA) block copolymer to be used as a compatibilizer for blends of polyolefin/polar polymer, PB-b-PMMA was synthesized by anionic-free radical mechanism transformation polymerization. Selective extraction, gradient elution thin layer chromatography, and oil-oil emulsion separation techniques were tried to attempt to separate the copolymerization products. Hydrogenation of the PB sequence in PB-b-PMMA yielded HPB-b-PMMA. The compatibilizing function of PB-b-PMMA was shown in blending experiments. © 1993 John Wiley & Sons, Inc.