铬、钕双掺钆镓石榴石(Cr4+,Nd3+):Gd3 Ga5 O12激光晶体光学性能的研究

用提拉法生长了掺铬、钕的钆镓石榴石(Cr^4 ,Nd^3 ：GGG)自调Q激光品体。报道了室温下的吸收光谱和荧光光谱特性。分析了Cr离子浓度对光谱性质的影响。比较了Cr^4 ：GGG,Nd^3 ：GGG和(Cr^4 ,Nd^3 )：GGG晶体吸收光谱的关系。测量了(Cr^4 ,Nd^3 )：GGG晶体和Nd^3 ：GGG晶体的荧光寿命,它们分别是33μs和250μs。实验表明,(Cr^4 ,Nd^3 )：GGG晶体是一种非常有潜力的自调Q激光晶体,可以实现大功率激光器的小型化和全固态化。     

Calculation of the reactor neutron time of flight spectrum by convolution technique

It is a very complex and time-consuming process to simulate the nuclear reactor neutron spectrum from the reactor core to the export channel by applying a Monte Carlo program. This paper presents a new method to calculate the neutron spectrum by using the convolution technique which considers the channel transportation as a linear system and the transportation scattering as the response function. It also applies Monte Carlo Neutron and Photon Transport Code （MCNP） to simulate the response function numerically. With the application of convolution technique to calculate the spectrum distribution from the core to the channel, the process is then much more convenient only with the simple numerical integral numeration. This saves computer time and reduces some trouble in re-writing of the MCNP program.     

牛津型斯特林制冷机的失效分析方法

分析了牛津型斯特林制冷机的主要失效机理、参数表征及探测方法,提出了制冷机的失效分析方法和程序。该方法将用于80K/2W制冷机加速寿命试验后的失效分析,为确认其失效模式和机理提供依据。     

Steganography and authentication in image sharing without parity bits

Recently, a polynomial-based (k, n) steganography and authenticated image sharing (SAIS) scheme was proposed to share a secret image into n stego-images. At the same time, one can reconstruct a secret image with any k or more than k stego-images, but one cannot obtain any information about the secret from fewer than k stego-images. The beauty of a (k, n)-SAIS scheme is that it provides the threshold property (i.e., k is the threshold value), the steganography (i.e., stego-images look like cover images), and authentication (i.e., detection of manipulated stego-images). All existing SAIS schemes require parity bits for authentication. In this paper, we present a novel approach without needing parity bits. In addition, our (k, n)-SAIS scheme provides better visual quality and has higher detection ratio with respect to all previous (k, n)-SAIS schemes.     

Highly efficient oxidation of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives by dioxygen

A highly efficient and environmental-benign oxidation by dioxygen (or air) as the sole oxidant was first applied for the conversion of 2-imidazoline-5-carboxylic derivatives to imidazole-5-carboxylic derivatives in very good and excellent yields. The substituent effect on 2-imidazoline ring was investigated. This protocol was also suitable for the synthesis of 2-imidazoles in relatively large scale.     

Simulation of Rarefied Gas Flows in Atmospheric Pressure Interfaces for Mass Spectrometry Systems

The understanding of the gas dynamics of the atmospheric pressure interface is very important for the development of mass spectrometry systems with high sensitivity. While the gas flows at high pressure (>1 Torr) and low pressure (<10^–3 Torr) stages are relatively well understood and could be modeled using continuum and molecular flows, respectively, the theoretical modeling or numeric simulation of gas flow through the transition pressure stage (1 to 10^–3 Torr) remains challenging. In this study, we used the direct simulation Monte Carlo (DMSC) method to develop the gas dynamic simulations for the continuous and discontinuous atmospheric pressure interfaces (API), with different focuses on the ion transfer by gas flows through a skimmer or directly from the atmospheric pressure to a vacuum stage, respectively. The impacts by the skimmer location in the continuous API and the temporal evolvement of the gas flow with a discontinuous API were characterized, which provide a solid base for the instrument design and performance improvement.

Detection of layer‐by‐layer self‐assembly multilayer films by low‐temperature plasma mass spectrometry

The detection of layer‐by‐layer self‐assembly multilayer films was carried out using low‐temperature plasma (LTP) mass spectrometry (MS) under ambient conditions. These multilayer films have been prepared on quartz plates through the alternate assembling of oppositely charged 4‐aminothiophenol (4‐ATP) capped Au particles and thioglycolic acid (TGA) capped Ag particles. An LTP probe was used for direct desorption and ionization of chemical components on the films. Without the complicated sample preparation, the structure information of 4‐ATP and TGA on films was studied by LTP‐MS. Characteristic ions of 4‐ATP (M) and TGA (F), including [M]^+?, [M‐NH₂]⁺, [M‐HCN‐H]⁺, and [F + H]⁺, [F‐H]⁺, [F‐OH]⁺, [F‐COOH]⁺ were recorded by LTP‐MS on the films. However, [M‐CS‐H]⁺ and [F‐SH]⁺ could not be observed on the film, which were detected in the neat sample. In addition, the semi‐quantitative analysis of chemical components on monolayer film was carried out, and the amounts of 4‐ATP and TGA on monolayer surface were 45 ng/mm² and 54 ng/mm², respectively. This resulted the ionization efficiencies of 72% for 4‐ATP and 54% for TGA. In order to evaluate the reliability of present LTP‐MS, the correlations between this approach and some traditional methods, such as UV–vis spectroscopy, atomic force microscope and X‐ray photoelectron spectroscopy were studied, which resulted the correlation coefficients of higher than 0.9776. The results indicated that this technique can be used for analyzing the films without any pretreatment, which possesses great potential in the studies of self‐assembly multilayer films. Copyright © 2013 John Wiley & Sons, Ltd.     

The Collision Cross Sections of Iodide Salt Cluster Ions in Air via Differential Mobility Analysis-Mass Spectrometry

To date, most collision cross section (CCS) predictions have invoked gas molecule impingement-reemission rules in which specular and elastic scattering of spherical gas molecules from rigid polyatomic surfaces are assumed. Although such predictions have been shown to agree well with CCSs measured in helium bath gas, a number of studies reveal that these predictions do not agree with CCSs for ions in diatomic gases, namely, air and molecular nitrogen. To further examine the validity of specular-elastic versus diffuse-inelastic scattering models, we measured the CCSs of positively charged metal iodide cluster ions of the form [MI]_n[M⁺]_z, where M?=?Na, K, Rb, or Cs, n?=?1 – 25, and z?=?1 – 2. Measurements were made in air via differential mobility analysis mass spectrometry (DMA-MS). The CCSs measured are compared with specular-elastic as well as diffuse-inelastic scattering model predictions with candidate ion structures determined from density functional theory. It is found that predictions from diffuse-inelastic collision models agree well (within 5 %) with measurements from sodium iodide cluster ions, while specular-elastic collision model predictions are in better agreement with cesium iodide cluster ion measurements. The agreement with diffuse-inelastic and specular-elastic predictions decreases and increases, respectively, with increasing cation mass. However, even when diffuse-inelastic cluster ion predictions disagree with measurements, the disagreement is of a near-constant factor for all ions, indicating that a simple linear rescaling collapses predictions to measurements. Conversely, rescaling cannot be used to collapse specular-elastic predictions to measurements; hence, although the precise impingement reemission rules remain ambiguous, they are not specular-elastic.

Mass spectrometry imaging for biomedical applications

The development of technologies for mass spectrometry imaging is of substantial research interest. Mass spectrometry is potentially capable of providing highly specific information about the distribution of compounds in tissues, with high sensitivity. The in-situ analysis needed for tissue imaging requires MS to be performed under conditions different from the traditional ones, typically with intensive sample preparation and optimized for pharmaceutical applications. In this paper we critically review the current status of MS imaging with different methods of sample ionization and discuss the 3D and quantitative imaging capabilities which need further development, the importance of the multi-modal imaging, and the balance between the pursuit of high-resolution imaging and the practical application of MS imaging in biomedicine.