气相色谱法同时测定蔬菜中24种有机磷农药残留

建立了蔬菜中24种有机磷类农药残留气相色谱同时分析的方法。样品用含0.1%乙酸的乙腈提取,净化采用分散固相萃取的方式:在提取液中加入C18(ODS)、石墨炭黑、PSA等吸附剂粉末进行净化,采用DB-1701(30 m×0.32 mm×0.25μm)毛细管柱分离,FPD(P)检测。24种农药的质量分数在0.002~0.05 mg/kg时,回收率在80.1%~102.1%之间、RDS为1.4%~5.1%。各农药的检测限为:三硫磷、三唑磷为0.004 mg/kg、苯硫磷为0.01 mg/kg,其它21种为0.002 mg/kg。     

硅烷化衍生-气相色谱-质谱联用法测定橙汁粉中维生素C

橙汁粉样品用N,N-二甲基甲酰胺提取,并离心分离,所得上清液中抗坏血酸与六甲基二硅氨烷和三甲基氯硅烷进行衍生反应,产物用正庚烷萃取。萃取液加入棕榈酸甲酯作为内标,供气相色谱-质谱分析。在气相色谱分离中用HP-5MS毛细管柱(30 m×250μm,0.25μm)为固定相,在质谱测定中采用全扫描模式。硅烷化抗坏血酸标准与内标峰面积的比值与硅烷化抗坏血酸的质量在1.0～5.0 mg范围内呈线性关系。方法用于橙汁粉样品中维生素C的测定,橙汁粉中维生素C的平均质量分数(n=6)为0.195 4%,回收率在92.3%～98.5%之间。     

Preparation of a sulfonated fused-silica capillary and its application in capillary electrophoresis and electrochromatography

In the present paper, two new methods, sol-gel and chemical bonding methods, were proposed for preparation of sulfonated fused-silica capillaries. In the sol-gel method, a fused-silica capillary was coated with the sol solution obtained by hydrolysis of 3-mercaptopropyltrimethoxysilane (MPTS) and tetramethoxysilane, and followed by age; while in the chemical bonding method, a capillary was chemically bonded directly with MPTS. Then, both the resulting capillaries were oxidized with an aqueous solution of hydrogen peroxide solution (H2O2) (30%, m/m) to obtain the sulfonated capillaries. The electroosmotic flow (EOF) for the sulfonated capillaries was found to remain almost constant within the studied pH range, and greater than that of the uncoated capillary. However, the coating efficiency of the capillary prepared by chemical bonding method was higher than that by sol-gel method, by comparing their magnitude of the EOF, the degree of disguise of the silanol and reproducibility of preparation procedure. The effects of the electrolyte's concentration and the content of methanol (MeOH) on the EOF were also studied. Especially, the study of the apparent pH (pH*) on the EOF in a water-MeOH system was reported. Finally, capillary electrophoretic separation of seven organic acids was achieved within 6.5 min under optimal condition using the chemically bonded sulfonated capillary. Moreover, separation of four alkaloids on the sulfonated capillary was compared with that on uncoated capillary in different conditions. Ion-exchange mechanism was found to play a key role for separation of these four basic analytes on the sulfonated capillary.     

Hybridization Gap and Dresselhaus Spin Splitting in EuIr4In2Ge4

EuIr₄In₂Ge₄ is a new intermetallic semiconductor that adopts a non‐centrosymmetric structure in the tetragonal ${I\bar 42m}$ space group with unit cell parameters a=6.9016(5) Å and c=8.7153(9) Å. The compound features an indirect optical band gap E_g=0.26(2) eV, and electronic‐structure calculations show that the energy gap originates primarily from hybridization of the Ir 5d orbitals, with small contributions from the Ge 4p and In 5p orbitals. The strong spin–orbit coupling arising from the Ir atoms, and the lack of inversion symmetry leads to significant spin splitting, which is described by the Dresselhaus term, at both the conduction‐ and valence‐band edges. The magnetic Eu²⁺ ions present in the structure, which do not play a role in gap formation, order antiferromagnetically at 2.5 K.     

Realizing both High Energy and High Power Densities by Twisting Three Carbon‐Nanotube‐Based Hybrid Fibers

Energy storage devices, such as lithium‐ion batteries and supercapacitors, are required for the modern electronics. However, the intrinsic characteristics of low power densities in batteries and low energy densities in supercapacitors have limited their applications. How to simultaneously realize high energy and power densities in one device remains a challenge. Herein a fiber‐shaped hybrid energy‐storage device (FESD) formed by twisting three carbon nanotube hybrid fibers demonstrates both high energy and power densities. For the FESD, the energy density (50 mWh cm^?3 or 90 Wh kg^?1) many times higher than for other forms of supercapacitors and approximately 3 times that of thin‐film batteries; the power density (1 W cm^?3 or 5970 W kg^?1) is approximately 140 times of thin‐film lithium‐ion battery. The FESD is flexible, weaveable and wearable, which offers promising advantages in the modern electronics.     

One Step Preparation of Reduced Graphene Oxide/Pd–Fe3O4@Polypyrrole Composites and Their Application in Catalysis

The simple preparation of catalysts with superior catalytic activity and good reusability is highly desirable. Herein, we report a novel strategy to construct reduced graphene oxide (rGO)/Pd–Fe₃O₄@polypyrrole (PPy) catalysts with Pd and Fe₃O₄ nanoparticles anchored on a rGO nanosheet surface and wrapped in a PPy shell. The synthesis and assembly of both the Pd and Fe₃O₄ nanoparticles, the preparation of the PPy layer, and the reduction of graphene oxide nanosheets were finished in one step. In the system, the PPy layer not only prevented aggregation of Pd and Fe₃O₄ nanoparticles, but also generated a synergistic effect with precursor Pd²⁺ ions, which led to a high dispersity of as‐prepared Pd nanoparticles. Although the procedure was simplified to one step, the catalytic activity and reusability were not sacrificed. In the reduction of 4‐nitrophenol, their catalytic performance was better than that in recent reports. Moreover, the catalysts showed good reusability owing to their magnetic properties.     

A General and Mild Catalytic α‐Alkylation of Unactivated Esters Using Alcohols

Catalytic α‐alkylation of esters with primary alcohols is a desirable process because it uses low‐toxicity agents and generates water as the by‐product. Reported herein is a NCP pincer/Ir catalyst which is highly efficient for α‐alkylation of a broad scope of unactivated esters under mild reaction conditions. For the first time, alcohols alkylate unactivated α‐substituted acyclic esters, lactones, and even methyl and ethyl acetates. This method can be applied to the synthesis of carboxylic acid derivatives with diverse structures and functional groups, some of which would be impossible to access by conventional enolate alkylations with alkyl halides.     

A Mixed Ionic and Electronic Conducting Dual‐Phase Membrane with High Oxygen Permeability

To combine good chemical stability and high oxygen permeability, a mixed ionic‐electronic conducting (MIEC) 75 wt % Ce_0.85Gd_0.1Cu_0.05O_2?δ‐25 wt % La_0.6Ca_0.4FeO_3?δ (CGCO‐LCF) dual‐phase membrane based on a MIEC–MIEC composite has been developed. Copper doping into Ce_0.9Gd_0.1O_2?δ (CGO) oxide enhances both ionic and electronic conductivity, which then leads to a change from ionic conduction to mixed conduction at elevated temperatures. For the first time we demonstrate that an intergranular film with 2–10 nm thickness containing Ce, Ca, Gd, La, and Fe has been formed between the CGCO grains in the CGCO‐LCF one‐pot dual‐phase membrane. A high oxygen permeation flux of 0.70 mL min^?1 cm^?2 is obtained by the CGCO‐LCF one‐pot dual‐phase membrane with 0.5 mm thickness at 950 °C using pure CO₂ as the sweep gas, and the membrane shows excellent stability in the presence of CO₂ even at lower temperatures (800 °C) during long‐term operation.     

Syntheses,Structures, and Luminescent Properties of d10 Coordination Polymers with 2‐(4‐Carboxyphenyl)‐imidazo[4, 5‐f]‐1, 10‐phenanthroline and 1, 3‐Benzenedicarboxylate Derivatives

Four Zn^II/Cd^II coordination polymers (CPs) based on 2‐(4‐carboxy‐phenyl)imidazo[4, 5‐f]‐1, 10‐phenanthroline (HNCP) and different derivatives of 5‐R‐1, 3‐benzenedicarboxylate (5‐R‐1, 3‐BDC) (R = NO₂, H, OH), [Zn(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 1 ), [Cd(HNCP)(5‐NO₂‐1, 3‐BDC)]_n ( 2 ), [Zn(HNCP)(1, 3‐BDC)(H₂O)₂]_n ( 3 ), and {[Zn(HNCP)(5‐OH‐1, 3‐BDC)(H₂O) · H₂O}_n ( 4 ) were synthesized under hydrothermal conditions. Compounds 1 – 4 were determined by elemental analyses, IR spectroscopy, and single‐crystal and powder X‐ray diffraction. Compounds 1 and 2 are isomorphous, presenting a 4‐connected uninodal (4, 4)‐sql 2D framework with threefold interpenetration, which are further extended into the three‐dimensional (3D) supramolecular architecture through π ··· π stacking interactions between the aryl rings of 5‐NO₂‐1, 3‐BDC. Compared to compound 1 , 3 is obtained by using different reaction temperatures and metal‐ligand ratios, generating a 3D framework with –ABAB– fashion via π ··· π stacking interactions. Compound 4 is a 1D chain, which is further extended into a 3D supramolecular net by hydrogen bonds and π ··· π stacking interactions. The thermogravimetric and fluorescence properties of 1 – 4 were also explored.     

Postfunctionalization of BN‐Embedded Polycyclic Aromatic Compounds for Fine‐Tuning of Their Molecular Properties

New BN‐embedded, thiophene‐fused, polycyclic aromatic compounds with planar geometry were designed and synthesized. The molecules showed excellent stability and chemical robustness. Postfunctionalization on this skeleton was demonstrated with a series of electrophilic bromination, palladium‐catalyzed cross‐coupling, and Knoevenagel condensation reactions. The π skeleton remained intact during these late‐stage transformations. The optical and electronic properties have been well tuned through incorporation of electron‐rich and ‐deficient groups on the backbone. This work shows the great advantage of the postfunctionalization strategy on BN‐containing polycyclic aromatic compounds for fast diversification and materials screening.