A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

钕诱导番茄产生抗性的时间研究

采用盆栽试验研究了Nd3 在不同诱导时间对番茄叶抗性指标(过氧化物酶(POD)、多酚氧化酶(PPO)和苯丙氨酸解氨酶(PAL)活性、细胞膜透性、氧自由基(O2-·)产生速率和木质素含量)的影响.结果表明:从第3 d开始,Nd3 诱导提高番茄叶内PAL活性,第3d增幅也最大,达32.30%,维持时间为诱导后第3～5 d;Nd3 诱导后第1～2 d POD活性升高,第1 d增幅最大,维持时间是诱导后第1～2 d;Nd3 诱导后1～3 d,PPO活性升高,第1 d增幅最大,维持时间是诱导后第1～3 d;从诱导后第2 d开始,Nd3 降低细胞膜透性,第3 d时降幅最大,为54.33%,持续时间为诱导后第2～5 d;从第3 d开始,Nd3 诱导降低氧自由基产生速率,第4 d降幅最大,第3 d氧自由基产生速率最低,持续时间为诱导后第3～5 d;从第4 d开始,Nd3 诱导提高木质素含量,5 d时有继续升高的趋势.从不同诱导时间番茄叶PAL活性、细胞膜透性、氧自由基产生速率的变化来看,在Nd3 诱导的第3 d,番茄产生的抗性最强.     

Mass spectrometry-based chemical mapping and profiling toward molecular understanding of diseases in precision medicine

Precision medicine has been strongly promoted in recent years. It is used in clinical management for classifying diseases at the molecular level and for selecting the most appropriate drugs or treatments to maximize efficacy and minimize adverse effects. In precision medicine, an in-depth molecular understanding of diseases is of great importance. Therefore, in the last few years, much attention has been given to translating data generated at the molecular level into clinically relevant information. However, current developments in this field lack orderly implementation. For example, high-quality chemical research is not well integrated into clinical practice, especially in the early phase, leading to a lack of understanding in the clinic of the chemistry underlying diseases. In recent years, mass spectrometry (MS) has enabled significant innovations and advances in chemical research. As reported, this technique has shown promise in chemical mapping and profiling for answering “what”, “where”, “how many” and “whose” chemicals underlie the clinical phenotypes, which are assessed by biochemical profiling, MS imaging, molecular targeting and probing, biomarker grading disease classification, etc. These features can potentially enhance the precision of disease diagnosis, monitoring and treatment and thus further transform medicine. For instance, comprehensive MS-based biochemical profiling of ovarian tumors was performed, and the results revealed a number of molecular insights into the pathways and processes that drive ovarian cancer biology and the ways that these pathways are altered in correspondence with clinical phenotypes. Another study demonstrated that quantitative biomarker mapping can be predictive of responses to immunotherapy and of survival in the supposedly homogeneous group of breast cancer patients, allowing for stratification of patients. In this context, our article attempts to provide an overview of MS-based chemical mapping and profiling, and a perspective on their clinical utility to improve the molecular understanding of diseases for advancing precision medicine.

An overview of MS-based chemical mapping and profiling, indicating its contributions to the molecular understanding of diseases in precision medicine by answering "what", "where", "how many" and "whose” chemicals underlying clinical phenotypes.     

Flow-injection chemiluminescence determination of fluoroquinolones by enhancement of weak chemiluminescence from peroxynitrous acid

A flow-injection chemiluminescence (CL) method is described for the determination of fluoroquinolones including ciprofloxacin, norfloxacin and ofloxacin. The method is based on the enhancement by these compounds of the weak CL from peroxynitrous acid. The linear ranges are 1.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹ for ciprofloxacin and norfloxacin, and 3.0×10⁻⁷ to 3.0×10⁻⁵ mol l⁻¹ for ofloxacin, respectively. The detection limits (S/N=3) are 4.5×10⁻⁸ mol l⁻¹ ciprofloxacin, 5.9×10⁻⁸ mol l⁻¹ norfloxacin and 1.1×10⁻⁷ mol l⁻¹ ofloxacin, respectively. The proposed method was applied to the determination of fluoroquinolones in pharmaceutical preparations.     

The biosynthesis of quadrone and terrecyclic acid

Feedings of [1-¹³C]- and [1,2-¹³C₂]acetate Aspergillus terreus gave quadrone and terrecyclic acid which were analyzed by ¹³C NMR. The pattern of ¹³C-enrichments and couplings is consistent with the formation of 1 and 2 by cyclization of farnesyl pyrophosphate.     

Nanocrystals for large Stokes shift-based optosensing

The influence of Stokes shift in optosensing was discussed. Then, the current status of large Stokes shift-based optosensing was reviewed here.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

A new cucurbitane triterpenoid from Momordica charantia

One new cucurbitane-type triterpenoid saponin, 5b,19-epoxycucurbita-6,23-diene-3b,19,25-triol-3-O-b-D-allopyranoside (1), named momordicoside P was isolated from the fresh fruits of Momordica charantia. The structure of the saponin was elucidated byspectral methods, including 2D-NMR spectra.     

Semiempirical Molecular Orbital Studies of the Acylation Step in the Lipase‐Catalyzed Ester Hydrolysis

In this study, we present the results from the semiempirical molecular orbital calculations for the acylation step in the lipase‐catalyzed ester hydrolysis. The results reveal that the lowest energy path for the formation of the tetrahedral intermediate is for the serine residue of the catalytic triad to attack the substrate, followed by coupling heavy atom movement and proton transfer. The calculations of four active site models show that the cooperation of the aspartate group and the oxyanion hole is capable of lowering the activation energy by about 16 kcalmol^?1. Our results further suggest that the lipase‐catalyzed ester hydrolysis adopts the single proton transfer mechanism.     

An Investigation on the Production of Random Copolymer with Monothiocarbonate and Trithiocarbonate Units over Cyclic Thiocarbonate via Metal‐free Catalysis

Synthesis of poly(thiocarbonate)s from the copolymerization of epoxides and carbon disulfide (CS₂) remains a tough challenge, due to inevitable oxygen‐sulfur atom scrambling process. In this work, we utilized the oxygen‐sulfur exchange reaction (O‐S ER) to synthesize a random copolymer with monothiocarbonate and trithiocarbonate units from CS₂ and phenyl glycidyl ether (PGE) via metal‐free Lewis pairs. The copolymers contained monothiocarbonate and trithiocarbonate units of which the molar fraction could be tuned by varying either the types of Lewis pairs or the reaction temperature. Keeping track on the intermediate provided an insight in the process of O‐S ER and thus gave a hint to control the product structure. Production and consumption of phenyl thioglycidyl ether was the key process to regulate the chain structure. Remarkably, the oxygen atoms of PGE could be excluded out of the chain, resulting in the nearly complete production of poly(trithiocarbonate)s. Correspondingly, the refractive index of this kind of copolymer could be regulated in a wide range of 1.73—1.79 (at 590 nm).