Regiochemistry in radical cyclization of allenes

The cyclization of allenic radicals was systematically studied for the first time by computational methods. It was found that the theoretical results at the ONIOM(QCISD(T)/6-311+G(2df,2p):UB3LYP/6-311+G(2df,2p)) level were in good agreement with all the available experimental data. For the cyclization of penta-3,4-dien-1-yl radicals the major product was penta-1,2-diene from direct reduction whereas a small amount of vinylcyclopropane may also be produced. For the cyclization of hexa-4,5-dien-1-yl radicals the major product is 1-methyl-cyclopentene. Furthermore, for the cyclization of hepta-5,6-dien-1-yl radicals both vinylcyclopentane and 1-methyl-cyclohexene are produced. Marcus theory analysis indicated that the formation of an olefinic radical product always had a lower intrinsic energy barrier than the formation of an allylic radical product. On the other hand, the formation of an olefinic radical product was always much less favorable than the formation of an allylic radical product in the thermodynamic term. For the cyclization of substituted hexa-4,5-dien-1-yl radicals, substitution at the allene moiety does not affect the regioselectivity where the allylic radical product is always favored. For the cyclization of hepta-5,6-dien-1-yl radicals, substitution at the allene moiety dramatically affects the regioselectivity, where some radical-stabilizing groups such as -CN and -COMe may even completely reserve the regioselectivity.     

Comparative analysis of blue‐shifted hydrogen bond versus conventional hydrogen bond in methyl radical complexes

Methyl radical complexes H₃C…HCN and H₃C…HNC have been investigated at the UMP2(full)/aug‐cc‐pVTZ level to elucidate the nature of hydrogen bonds. To better understand the intermolecular H‐bond interactions, topological analysis of electron density at bond critical points (BCP) is executed using Bader's atoms‐in‐molecules (AIM) theory. Natural bond orbital (NBO) analysis has also been performed to study the orbital interactions and change of hybridization. Theoretical calculations show that there is no essential difference between the blue‐shift H‐bond and the conventional one. In H₃C…HNC complex, rehybridization is responsible for shortening of the N? H bond. The hyperconjugative interaction between the single electron of the methyl radical and N? H antibonding orbital is up to 7.0 kcal/mol, exceeding 3.0 kcal/mol, the upper limit of hyperconjugative n(Y)→σ*(X–H) interaction to form the blue‐shifted H‐bond according to Alabugin's theory. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

A simple and effective boundary model in nonequilibrium molecular dynamics method

We propose a simple and effective boundary model in a nonequilibrium molecular dynamics (NEMD) simulation to study the out-of-equilibrium dynamics of polymer fluids. The present boundary model can effectively weaken the depletion effect and the slip effect near the boundary, and remove the unwanted heat instantly. The validity of the boundary model is checked by investigating the flow behavior of dilute polymer solution driven by an external force. Reasonable density distributions of both polymer and solvent particles, velocity profiles of the solvent and temperature profiles of the system are obtained. Furthermore, the studied polymer chain shows a cross-streaming migration towards center of the tube, which is consistent with that predicted in previous literatures. These numerical results give powerful evidences for the validity of the present boundary model. Besides, the boundary model can also be used in other flows in addition to the Poiseuille flow.     

原位掺杂法制备氮掺杂中孔炭及乙炔氢氯化反应性能

聚氯乙烯(PVC)是世界五大工程塑料之一,在工业、农业、建筑、电力及通信等领域有着非常广泛的应用.氯乙烯(VCM)作为合成 PVC的单体,其生产工艺以源于煤化工路线的乙炔氢氯化法工艺为主,但是该工艺目前采用的是氯化汞催化剂,存在较为严重的环境污染问题.开发新型无汞催化剂成为电石法生产 VCM亟待解决的问题.氮掺杂炭基非金属催化剂成本低廉,制备简单,在诸多反应中展现了较好的性能,成为近几年多相催化领域的一个研究热点,在乙炔氢氯化反应中也具有较好的活性,但是对活性中心的鉴别及制备方法的研究还有待深入.本文报道了一种一步原位尿素掺杂氮的中孔炭的制备方法,采用氮气吸附-脱附、高分辨透射电子显微镜、元素分析和X射线光电子能谱(XPS)等表征手段研究了氮掺杂中孔炭的结构、氮含量及存在形式,并与两步尿素改性方法做了对比,探究了氮掺杂形式与中孔炭乙炔氢氯化反应性能之间的关系,同时考察了尿素用量对氮掺杂中孔炭的氮含量和存在形式的影响.元素分析结果表明,原位合成法能有效地将氮掺杂进骨架中,随着制备过程中尿素用量增加,得到的氮掺杂中孔炭中的氮含量增加,可达3.6 wt%.后处理法的掺氮效果较差,材料氮含量仅为0.2 wt%. XPS测试进一步表明,一步法原位法可以得到石墨型氮占据主导地位的氮掺杂中孔炭,石墨型氮约占70%左右,后处理制备的氮掺杂中孔炭中石墨氮、吡啶氮和吡咯氮三种形式含量相差不大.对不同方法合成的氮掺杂介孔炭的乙炔氢氯化反应催化性能进行了评价,结果显示,无论是原位合成还是后处理制备的氮掺杂中孔炭,其活性均比中孔炭得到一定提升.氮的引入能有效提高材料的乙炔氢氯化反应性能.原位合成法制备的氮掺杂中孔炭在乙炔氢氯化反应中的催化性能远高于后处理法.对于原位合成的氮掺杂中孔炭,在一定范围内,随着氮含量的增加,催化活性提高,但当尿素用量过高时,虽然氮含量增加,催化活性却有所下降,这归因于孔结构坍塌和比表面积下降.     

In situ sulfur isotopes (δS and δS) analyses in sulfides and elemental sulfur using high sensitivity cones combined with the addition of nitrogen by laser ablation MC-ICP-MS

The sulfur isotope is an important geochemical tracer in diverse fields of geosciences. In this study, the effects of three different cone combinations with the addition of N₂ on the performance of in situ S isotope analyses were investigated in detail. The signal intensities of S isotopes were improved by a factor of 2.3 and 3.6 using the X skimmer cone combined with the standard sample cone or the Jet sample cone, respectively, compared with the standard arrangement (H skimmer cone combined with the standard sample cone). This signal enhancement is important for the improvement of the precision and accuracy of in situ S isotope analysis at high spatial resolution. Different cone combinations have a significant effect on the mass bias and mass bias stability for S isotopes. Poor precisions of S isotope ratios were obtained using the Jet and X cones combination at their corresponding optimum makeup gas flow when using Ar plasma only. The addition of 4–8 ml min⁻¹ nitrogen to the central gas flow in laser ablation MC-ICP-MS was found to significantly enlarge the mass bias stability zone at their corresponding optimum makeup gas flow in these three different cone combinations. The polyatomic interferences of OO, SH, OOH were also significantly reduced, and the interference free plateaus of sulfur isotopes became broader and flatter in the nitrogen mode (N₂ = 4 ml min⁻¹). However, the signal intensity of S was not increased by the addition of nitrogen in this study. The laser fluence and ablation mode had significant effects on sulfur isotope fractionation during the analysis of sulfides and elemental sulfur by laser ablation MC-ICP-MS. The matrix effect among different sulfides and elemental sulfur was observed, but could be significantly reduced by line scan ablation in preference to single spot ablation under the optimized fluence. It is recommended that the d₉₀ values of the particles in pressed powder pellets for accurate and precise S isotope analysis should be less than 10 μm. Under the selected optimized analytical conditions, excellent agreements between the determined values and the reference values were achieved for the IAEA-S series standard reference materials and a set of six well-characterized, isotopic homogeneous sulfide standards (PPP-1, MoS₂, MASS-1, P-GBW07267, P-GBW07268, P-GBW07270), validating the capability of the developed method for providing high-quality in situ S isotope data in sulfides and elemental sulfur.     

“Turn-off” fluorescent data array sensor based on double quantum dots coupled with chemometrics for highly sensitive and selective detection of multicomponent pesticides

As a popular detection model, the fluorescence “turn-off” sensor based on quantum dots (QDs) has already been successfully employed in the detections of many materials, especially in the researches on the interactions between pesticides. However, the previous studies are mainly focused on simple single track or the comparison based on similar concentration of drugs. In this work, a new detection method based on the fluorescence “turn-off” model with water-soluble ZnCdSe and CdSe QDs simultaneously as the fluorescent probes is established to detect various pesticides. The fluorescence of the two QDs can be quenched by different pesticides with varying degrees, which leads to the differences in positions and intensities of two peaks. By combining with chemometrics methods, all the pesticides can be qualitative and quantitative respectively even in real samples with the limit of detection was 2 × 10⁻⁸ mol L⁻¹ and a recognition rate of 100%. This work is, to the best of our knowledge, the first report on the detection of pesticides based on the fluorescence quenching phenomenon of double quantum dots combined with chemometrics methods. What's more, the excellent selectivity of the system has been verified in different mediums such as mixed ion disruption, waste water, tea and water extraction liquid drugs.     

A novel immunochromatographic assay based on a time-resolved chemiluminescence strategy for the multiplexed detection of ractopamine and clenbuterol

A novel multiplexed immunochromatographic assay (ICA) based on a time-resolved chemiluminescence (CL) strategy was developed for quantitative detection of β-agonists, by utilizing ractopamine (RAC) and clenbuterol (CLE) as the models. Different from conventional multiplexed ICA methods which usually require two or more test lines, this strategy was developed for detection of two β-agonists by using only one test line on the nitrocellulose membrane. In this study, horseradish peroxidase and alkaline phosphatase were used as the signal probes to label RAC antibody and CLE antibody, respectively. The two CL reactions with flash type and glow type kinetics characteristics were triggered simultaneously by injecting the coreactants, then the signals for RAC and CLE detections were recorded at 3 s and 300 s after coreactants injection, respectively. Owing to the utilization of CL detection, this protocol showed ideal sensitivity for quantitation. Under the optimal conditions, the detection limits for RAC and CLE were 0.17 ng mL⁻¹ and 0.067 ng mL⁻¹ (S/N = 3), respectively. The whole assay process can be accomplished within 20 min without complicated sample pretreatment. The proposed method was successfully applied for the detection of RAC and CLE in spiked swine urine. It opens up a new pathway for designing a low cost, time-efficiency and multiplexed strategy for rapid screening and field assay.     

Optical properties of transparent copper nanorod and nanowire arrays embedded in anodic alumina oxide

Transparent copper nanorod/nanowire arrays and anodic alumina oxide composite films have been prepared by alternating current electrodeposition, and their linear optical properties have been systematically characterized by absorption spectra. In the experimental spectra, there exist transverse and longitudinal resonance peaks, which are caused by the surface-plasmon resonance along the diameter and the length of the copper nanorods, respectively. The transverse resonance peak is affected by the diameter and aspect ratio of the nanorod. The longitudinal resonance peak appears at longer wavelength when a polarized light illuminates the film with an angle of incidence of about 70 degrees , where the angle is defined with respect to the surface normal. Moreover, the longitudinal resonance mode is sensitive to the polarization direction when compared with the transverse resonance mode.     

Direct evidence of oxidized gold on supported gold catalysts

Supported gold catalysts have drawn worldwide interest due to the novel properties and potential applications in industries. However, the origin of the catalytic activity in gold nanoparticles is still not well understood. In this study, time-of-flight secondary ion mass spectroscopy (TOF-SIMS) has been applied to investigate the nature of gold in Au (1.3 wt %)/gamma-Al2O3 and Au (2.8 wt %)/TiO2 catalysts prepared by the deposition-precipitation method. The SIMS spectrum of the supported gold catalysts presented AuO-, AuO2-, and AuOH- ion clusters. These measurements show direct evidence for oxidized gold on supported gold catalysts and may be helpful to gaining better understanding of the origin of the catalytic activity.     

Highly active rhodium/phosphorus catalytic system for the hydroformylation of α-methylstyrene

Rhodium catalyzed hydroformylation of a-methylstyrene was investigated in the presence of monodentate phosphine ligands L1–L6. We found that the phosphine with good p-acceptability could efficiently improve the activity of the a-methylstyrene hydroformylation. The big steric hindrance of a-C in a-methylstyrene enhanced the regioselectivity towards the linear aldehyde, which resulted in3-phenylbutanal as the predominant product(99.0%). When tris(N-pyrrolyl)phosphine(L1) modified Rh(acac)(CO)_2was employed as the catalyst, the TOF could reach up to 5786 h~(-1)in the a-methylstyrene hydroformylation at relatively mild conditions(110 8C, 6 MPa).