陆地棉体细胞胚胎的发生和遗传转化条件初探

以陆地棉（冀棉20）下胚轴为外植体，在含KT0．3mg／L和2，4－D0．08mg／L的MS培养基上，诱导产生了胚性愈伤组织，继代培养不需要添加激素，胚性愈伤组织即分化为胚状体，并萌发出小芽，胚状体萌发过程与合子胚相似，但出现了一些畸形胚，解剖学方法观察发现，这些畸形胚的维管束系统不明显或形态异常，以农杆菌介导法对冀棉20胚状体及胚性愈伤组织进行了雪花莲凝集素（GNA）基因的遗传转化条件探索，并以GUS基域瞬间进行检测加以证实，得出农杆菌的浓度为O．D600＝0．8时，浸染时间为5min，共培养时间为3d，筛选培养基中卡那霉素浓度为75mg／L，对冀棉20胚状体及胚性愈伤组织转化是较为适合的。     

EDFA增益谱的精确测量

本文设计一种精确测量EDFA增益谱方法,按照这种方法,不需要考虑EDFA的内部结构,使用较小功率的宽光谱光源和任意波长的激光器,能够较简便精确测量EDFA小信号增益.     

Interrogation technique for a fiber Bragg grating sensing array based on a Sagnac interferometer and an acousto-optic modulator

We propose and experimentally demonstrate a novel real-time interrogation technique for a fiber Bragg grating (FBG) sensing system that is based on a frequency-shifted asymmetric Sagnac interferometer. FBG sensors are connected to the Sagnac loop by an optical coupler, and an acousto-optic modulator (AOM) is asymmetrically placed in the Sagnac loop. By linearly sweeping the driving frequency of the AOM, the environmental variation around each FBG sensor can be determined by measuring the spectrum of the interference signals of the two counterpropagating light beams reflected by the corresponding FBG. The system has the advantages of low cost and real-time sensing.     

Fabrication and characterization of rod-like nano-hydroxyapatite on MAO coating supported on Mg-Zn-Ca alloy

The poor corrosion resistance of magnesium alloys is a dominant problem that limits their clinical application. In order to solve this challenge, micro-arc oxidation (MAO) was used to fabricate a porous coating on magnesium alloys and then electrochemical deposition (ED) was done to fabricate rod-like nano-hydroxyapatite (RNHA) on MAO coating. The cross-section morphology of the composite coatings and its corresponding energy dispersion spectroscopy (EDS) surficial scanning map of calcium revealed that HA rods were successfully deposited into the pores. The three dimensional morphology and scanning electron microscopy (SEM) image of the composite coatings showed that the distribution of the HA rods was dense and uniform. Atomic force microscope (AFM) observation of the composite coatings showed that the diameters of HA rods varied from 95 nm to 116 nm and the root mean square roughness (RMS) of the composite coatings was about 42 nm, which were favorable for cellular survival. The bonding strength between the HA film and MAO coating increased to 12.3 MPa, almost two times higher than that of the direct electrochemical deposition coating (6.3 MPa). Compared with that of the substrate, the corrosion potential of Mg-Zn-Ca alloy with composite coatings increased by 161 mV and its corrosion current density decreased from 3.36 × 10⁻⁴ A/cm² to 2.40 × 10⁻⁷ A/cm² which was due to the enhancement of bonding strength and the deposition of RNHA in the MAO pores. Immersion tests were carried out at 36.5 ± 0.5 °C in simulated body fluid (SBF). It was found that RNHA can induce the rapid precipitation of calcium orthophosphates in comparison with conventional HA coatings. Thus magnesium alloy coated with the composite coatings is a promising candidate as biodegradable bone implants.     

The tribology properties of alumina/silica composite nanoparticles as lubricant additives

The as-prepared alumina/silica (Al₂O₃/SiO₂) composite nanoparticles were synthesized with a hydrothermal method and modified by silane coupling agent. The tribological properties of the modified Al₂O₃/SiO₂ composite nanoparticles as lubricating oil additives were investigated by four-ball and thrust-ring tests in terms of wear scar diameter, friction coefficient, and the morphology of thrust-ring. It is found that their anti-wear and anti-friction performances are better than those of pure Al₂O₃ or SiO₂ nanoparticles. When the optimized concentration of nanoparticle additive is 0.5 wt.%, the diameters of wear scar and friction coefficients are both smallest. Such modified composite nanoparticles can adsorb onto the friction surfaces, which results in rolling friction. Therefore, the friction coefficient is reduced.     

关于铝棒发声问题的探究

"兴华探究乐园"是我校的一个特色资源,这里有许多有趣的探究资源,深受广大师生的喜欢.这引起资源让我们更深刻地理解探究中所运用的知识.     

高准确度的钙离子光频标

近年来,冷原子技术和激光技术促进了高精度光频标的发展,有望在建立时间基准、推动基础研究和满足国家需求等方面发挥重要的作用.本文介绍了中国科学院武汉物理与数学研究所近年来在高准确度钙离子(~(40)Ca~+)光频标研究方面的进展:采用新的ULE腔系统,实现了729 nm钟跃迁激光器1—100 s的频率稳定度均优于2×10~(-15),通过对外场和环境效应的控制及克服,特别是囚禁离子运动效应的抑制,获得单个钙离子光频标的不确定度优于5.5×10~(-17);通过两台光频标的比对,测得20000 s的稳定度也进入10~(-17)量级;基于高精度钙离子光频标平台,进行了相关精密测量的工作,包括:基于全球定位系统的超高精度远程光频绝对值测量方案,第二次测量了钙离子的光频跃迁绝对值,该测量结果再次被国际时间频率咨询委员会采纳,更新了钙离子的频率推荐值;精确测量了钙离子的钟跃迁魔幻波长,由此提出新型的全光囚禁离子光频标的方法;精密测量了钙离子的亚稳态寿命等参数.以上工作推动了基于冷原子的精密测量工作.     

Multi-wavelength metal-dielectric nonpolarizing beam splitters in the near-infrared range

A 21-layer multi-wavelength metal-dielectric nonpolarizing cube beam splitter was designed by use of an optimization method and theoretically investigated in the near-infrared range. The angular dependence of the reflectance and differential phases induced by reflection and transmission were presented. The simulation results revealed that the non-polarizing effect could be achieved for both the amplitude and phase characteristics at 1310 and 1550 nm. The differences between the simulated and the target reflectance of 50% are less than 2% and differential phases are less than 5°in the range 1300–1320 nm and 1540–1550 nm for both p- and s-components.     

ZnCdse－ZnSe多量子阱中的激子发光

在７７－３００Ｋ温度下研究了Ｚｎ（１－ｘ）ＣｄｘＳｅ－ＺｎＳｅ多量子阱（ＭＱＷｓ）的光致发光特性．首次在７７Ｋ，Ａｒ离子激光器的４５７．９ｎｍ激发下，在Ｚｎ（０．６８）Ｃｄ（０．３２）Ｓｅ－ＺｎｓｅＭＱＷｓ中观测到５个发光带，其中三个发光带被归因于不同的激子发射：即ｎ＝１重空穴（ＨＨ）激子；ｎ＝ｌ轻－重空穴（ＬＨ）激子和ｎ＝ＩＨＨ激子同时发射两个纵光学声子的复合发光，并且，；ｎ＝１ＨＨ激子发光可延续至室温．     

牛顿环实验测量结果的不确定度评定及其表示

讨论了不等精度测量牛顿环曲率半径及牛顿环直径不确定度的评定及表示