铝硫二元团簇的组分及其光解规律

硫与金属元素所形成的二元团簇具有很多重要的特性,已受到人们的普遍重视.用激光-串级飞行时间质谱仪,我们曾研究了硫与过渡金属钽、铁等的二元团簇.最近我们选取主族金属元素铝,研究了铝硫团簇的形成及其光解,实验结果表明,与钽硫或铁硫团簇相比,铝硫团簇无论在其组份构成还是在其光解方面,都表现出鲜明的特有规律性.实验的主要参数如下:溅射用激光为Nd:YAG 二倍频,其输出强度控制在约10~7W·cm~(-2),激光的重复频率10Hz 样品位于激光束的焦点附近,由焦距f=50cm 的透镜调整其聚焦状     

耐硫催化剂上合成混合醇的研究

通过改进制备方法和添加助剂，用浸渍－热分解法制得了具有高活性和高选择性的MoS2-K-C型耐硫低碳混合醇催化剂。在8.0-11.0MPa,290-340℃，6000-12000h^-1,H2 S 浓度为100ppm 左右的条件下，在直流反应器中对催化剂进行了性能测试，结果表明，醇得率为0.14-0.47gROH(gcat·h)^-1，选择性为89-98%。同时，考察了操作条件对催化剂性能的影响。1042h的试验，证明催化剂具有很好的稳定性。     

有机化合物结构与性能的关系——激发能的同系线性规律

有机化合物的光谱及激发能存在着良好的同系线性规律。前文曾用HMO法对多联苯体系的同系线性规律进行了讨论,说明了对联多苯的共轭作用比间联多苯强,而后者共轭作用很弱,这可从光谱得到证实。近来,徐光宪等探讨了同系线性规律的量子化学基础,根据多烯中键长交替现象提出了MHMO法。     

关于气相渗透法仪器常数对分子量的依赖性

在热敏电阻装置不同的两种仪器上,对分子量为178—716的九种纯化合物,在苯、氯仿和丁酮中,和几个温度下测定了VPO仪器常数K值,在此分子量范围内,K值是常量。为了研究仪器结构对测试结果的影响,对分子量为1200—3.5×10~4的几个聚合物进行测试,所得结果很接近,并发现达到稳态所需时间和溶剂性质有明显的关系。     

心脑血管疾病与微量元素研究进展

心脑血管疾病发病日益增多的原因之一是机体缺乏人体必需微量元素,目前报道硒、锗、锌、钴、铜、锰、铬、钼、钒、镍等与心脑血管疾病有密切关系。用微量元素调控防治心脑血管疾病,目前是国内外研究的新课题,其目的是降低心脑血管疾病的死亡率和发病率,促进人类健康长寿。     

Selective Oxidation of Aldehyde over Hydroxymethyl Group Catalyzed by Gold Nanoparticles in Aqueous Phase

A protocol for selectively oxidizing aldehyde over hydroxymethyl group is developed, using biomass starch protected gold nanoparticles (NPs) as catalyst. The Au NPs show high selectivity that aldehyde is oxidized into carboxylic acid while alcoholic hydroxyl group stays intact in selective oxidation of 4-(hydroxymethyl)-benzaldehyde. The heterogeneous catalysis system is composed of soluble catalysts and insoluble substrate. The gold catalyst is prepared, preserved and applied for catalytic oxidation all in water. After reaction conditions are optimized, H\begin{document}$_2$\end{document}O\begin{document}$_2$\end{document} is found to be the best oxidizing agent with complete conversion. Besides, the gold catalyst displays good versitility for aldehyde derivatives. After reaction completes, organic components are extracted by organic solvent and gold NPs in water are separated and recycled.     

一种刺松藻来源的硫酸阿拉伯聚糖的制备及特征结构表征

刺松藻(Codium fragile)经水提-醇沉获得粗多糖, 进一步将刺松藻粗多糖(CFP) 通过Q-Sepharose Fast Flow(QFF) 阴离子交换柱纯化得到6个多糖组分CFP1CFP6, 其中, 在CFP6中发现纯度较高的阿拉伯聚糖. 采用高效凝胶渗透色谱与十八角激光散射仪联用法和1-苯基-3-甲基-5-吡唑啉酮(PMP)柱前衍生高效液相色谱法对CFP6的分子量及单糖组成进行了分析. 结果表明, CFP6是一种分子量为79290的多糖, 由阿拉伯糖(Ara)和半乳糖(Gal)组成, 二者摩尔比为14.8:1.0. 通过多维核磁共振波谱、 液相色谱-质谱联用及二级质谱等方法对CFP6的糖苷键连接方式及其寡糖序列结构进行表征, 进一步阐明了该复杂多糖的特征结构. 经判断, CFP6主链由Ara组成, 通过 β-(1→3)糖苷键连接, 在Ara的C2位存在分支结构, 硫酸基位于Ara的C4或C2位.     

一步制备高比表面积介孔Co3O4-CeO2及其表征

以有序介孔二氧化硅KIT-6为硬模板,硝酸钴、硝酸铈为金属源,分别在真空辅助条件和普通搅拌条件下制备了介孔CoCeOx复合氧化物。采用XRD、SEM、TEM、N2吸脱附等技术表征了复合氧化物的物化性质,并评价其氧化甲苯的性能。结果表明,在真空辅助和搅拌条件下制备的CoCeOx氧化物是由Co3O4和CeO2组成的介孔Co3O4-CeO2复合氧化物,其比表面积分别为141和89 m^2·g^-1,平均孔径分别为8.7和9.6 nm。真空辅助纳米复制过程有利于金属盐的前驱体充分填充到模板的孔隙中,去除模板后,可以得到有序的介孔复合金属氧化物。所制备介孔钴铈复合氧化物具有孔道有序性好、比表面积大的特点,在挥发性有机化合物的氧化去除方面具有一定的应用前景。     

Rationally Designed Three‐Layered Cu2S@Carbon@MoS2 Hierarchical Nanoboxes for Efficient Sodium Storage

Hybrid materials, integrating the merits of individual components, are ideal structures for efficient sodium storage. However, the construction of hybrid structures with decent physical/electrochemical properties is still challenging. Now, the elaborate design and synthesis of hierarchical nanoboxes composed of three‐layered Cu₂S@carbon@MoS₂ as anode materials for sodium‐ion batteries is reported. Through a facile multistep template‐engaged strategy, ultrathin MoS₂ nanosheets are grown on nitrogen‐doped carbon‐coated Cu₂S nanoboxes to realize the Cu₂S@carbon@MoS₂ configuration. The design shortens the diffusion path of electrons/Na⁺ ions, accommodates the volume change of electrodes during cycling, enhances the electric conductivity of the hybrids, and offers abundant active sites for sodium uptake. By virtue of these advantages, these three‐layered Cu₂S@carbon@MoS₂ hierarchical nanoboxes show excellent electrochemical properties in terms of decent rate capability and stable cycle life.     

Electrochemical Oxidation of Nitrogen towards Direct Nitrate Production on Spinel Oxides

Nitrates are widely used as fertilizer and oxidizing agents. Commercial nitrate production from nitrogen involves high‐temperature‐high‐pressure multi‐step processes. Therefore, an alternative nitrate production method under ambient environment is of importance. Herein, an electrochemical nitrogen oxidation reaction (NOR) approach is developed to produce nitrate catalyzed by ZnFe_xCo_2?xO₄ spinel oxides. Theoretical and experimental results show Fe aids the formation of the first N?O bond on the *N site, while high oxidation state Co assists in stabilizing the absorbed OH^? for the generation of the second and third N?O bonds. Owing to the concerted catalysis, the ZnFe_0.4Co_1.6O₄ oxide demonstrates the highest nitrate production rate of 130±12 μmol h^?1 g_MO^?1 at an applied potential of 1.6 V versus the reversible hydrogen electrode (RHE).