基于软件无线电的无源超高频RFID标签性能测试

讨论了无源超高频射频识别(UHF RFID)系统的信号传输过程及性能测试方法,以软件定义无线电方式实现了符合ISO/IEC18000-6C标准的无源标签的部分性能测试,研究了部分通信参数动态变化时标签应答功率的变化,并对不同标签的灵敏度进行了测试.所有实验在常规条件下完成,测试研究表明在基带编码采用较小的Tari值、PW为50％以及较高的调制系数时,阅读器能够接收到标签反射回来的最大功率,系统的识别距离最远. 关键词： 射频识别 无源电子标签 标签灵敏度 性能测试     

双零色散光子晶体光纤结构参数的变化对其性能的影响

应用多极法,研究了正六边形结构光子晶体光纤的结构参数改变时,波长范围在0.8—1.8μm之间的双零色散光子晶体光纤的色散特性和非线系数随波长的变化规律.对具有相同结构参数的正六边形结构和正八边形结构进行比较,得到正六边形结构的双零色散光子晶体光纤的色散更加平坦,非线性系数有明显增大的结果.因此,正六边形结构更容易获得色散平坦的高非线性双零色散光子晶体光纤.最终设计了在800nm附近具有平坦色散和高非线性的正六边形双零色散光子晶体光纤.     

基于垂直结构的有机光发射晶体管制备与性能研究

制备了一种有机垂直光发射晶体管, 兼具有机发光二极管的发光和晶体管的开关调节两个功能.其结构为一个有机发光单元垂直堆叠在一个电容单元上,两单元通过一个共有的源电极连在一起.当电容单元被充电时,积累在源电极的电荷能有效地调节源极与有机层之间的载流子注入势垒,从而达到控制源漏输出电流的大小,最终控制发光单元发光的强度.实验结果表明,器件可提供02 mA的输出电流,其大小可驱动发光单元发光,工作电压（开启电压）为6 V.这种垂直集成方案,实现了器件多功能化,为有机发光二极管有源矩阵驱动的实际应用提供了一种新的解决方法. 关键词： 有机光发射晶体管 垂直 电容     

基于经验模态分解滤波的低频振荡Prony分析

传统Prony法在分析低频振荡时对输入信号要求较高,存在着对噪声敏感的弱点.因此提出一种经验模态分解滤波和改进Prony法相结合的低频振荡分析方法.该方法先用经验模态分解对低频振荡信号进行自适应滤波,再用改进Prony法对滤波后的信号进行分析.其中,改进Prony法有效阶数用归一化奇异值法确定.将该方法分别用于分析试验信号和IEEE 4机系统振荡信号,并与基于低通滤波器的Prony分析进行比较.结果表明,在较大噪声环境下,该方法仍然能相对准确的辨识出低频振荡主导模式,验证了其有效性. 关键词： 低频振荡 经验模态分解 改进Prony法 归一化奇异值法     

半导体超常媒质矩形谐振腔(英文)

设计并研究了两个有不同各向异性参数的半导体超常媒质矩形谐振腔,其中填充了部分右手半导体超常媒质和部分左手半导体超常媒质。通过作图法研究了充满非色散的右手半导体超常媒质和色散的左手半导体超常媒质的谐振腔中谐振模式的解。结果显示,谐振腔的谐振模式取决于半导体超常媒质的色散关系。讨论了每种谐振腔中包含的六种情况,分别表示两个区域的传播常数为实数和虚数的不同的组合,并且揭示了构建具有无相差特性的谐振腔的几何参数要求。     

Density-functional study of Si<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>C<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> (<Emphasis Type="Italic">n</Emphasis> = 10–15) clusters

Density-functional theory with generalized gradient approximation for the exchange-correlation potential has been used to calculate the structural and electronic properties of Si _n C _n (n = 10–15) clusters. We find that the Si _n C _n clusters prefer cagelike structures. An extensive isomer search shows that the lowest-energy arrangements are those in which the silicon atoms and the carbon atoms form two distinct subunits. It is found that the carbon atoms favor to form fullerene-like structure due to the sp ²-like bond. The silicon atoms are trying to cope with an unfavorable sp ² environment, but distorted tetrahedra still show up somewhere of the cagelike structures. On the basis of the lowest-energy geometries obtained, the binding energy, HOMO–LUMO gap, Mulliken charge, ionization potential and electron affinity of the clusters have been computed and analyzed. An electronic charge transfer from the Si-populated to the C-populated regions is observed.     

Research on application of MOOC in optical packet switching

An experiment on receiving and identifying multiple optical orthogonal codes （MOOC） sequence-based optical labels in an optical packet switching （OPS） network is reported. Two groups of MOOC with a code length of 23 and a code weight of 3 are used to identify the optical labels. The scheme and principle of OPS networks based on MOOC sequence-based optical labels are presented. Because optical labels contain OPS and routing information, the importance of optical label processing with multiple inconsecutive, random, and burst optical labels in an OPS network is pointed out. Considering the MOOC-based optical labels, we design a circuit consisting of a broadened network and a cascaded amplifier to receive multiple groups of low-power narrow pulses （optical labels in the MOOC-OPS network） with a period of 2 ns. The successful experimental results demonstrate that the designed scheme is feasible.     

Preparation and photoluminescence of TiO2/PS composite system

<正>A TiO_2/porous silicon(PS) composite system is prepared by chemical vapor deposition.The crystal form with anatase phase of the samples is evaluated by X-ray diffraction and ultraviolet-visible(UV-vis) absorbance spectra,and the morphology with microsphere of TiO_2 particles is characterized by scanning electron microscopy.The composite system formed by this technique gives a broad blue luminescence and the mechanism of photoluminescence with TiO_2/PS is also discussed.     

Subwavelength-resolution direct writing using submicron-diameter fibers

<正>A novel direct writing technique using submicron-diameter fibers is presented.This technique adopts contact mode in the process of writing,and submicron lines with different widths have been obtained. Experimental results demonstrate that the resolution of this technique can be smaller than the exposure wavelength of 442 nm,and 380-nm-wide line is achieved.In addition,the distribution of light fields in the photoresist layer is analyzed by finite-difference time-domain method.     

Study of decay mechanisms in B--->Lambdac+ppi- decays and observation of low-mass structure in the Lambdac+p system

Using a sample of 152 x 10(6) BB pairs accumulated with the Belle detector at the KEKB e+e- collider, we study the decay mechanism of three-body charmed decay B- --> Lambdac+ ppi-. The intermediate two-body decay B--->Sigmac (2455)0 p is observed for the first time with a branching fraction of (3.7 +/- 0.7 +/- 0.4 +/- 1.0) x 10(-5) and a statistical significance of 8.4sigma. We also observe a low-mass enhancement in the (Lambdac+p) system, which can be parametrized as a Breit-Wigner function with a mass of (3.35(-0.02)(+0.01) +/-0.02) GeV/c2 and a width of (0.07(-0.03)(+0.04) +/-0.04) GeV/c2. We measure its branching fraction to be (3.9(-0.7)(+0.8) +/- 0.4 +/- 1.0) x 10(-5) with a statistical significance of 6.2sigma. The errors are statistical, systematic, and that of the Lambdac+-->pK- pi+ decay branching fraction.