MAA存在下VAc/BA核壳乳液聚合过程中的胶粒形态研究

用ＴＥＭ和电位滴定法对不同配方和工艺条件得到的胶粒形态结构和羧基分别进行了表征。结果表明：加入甲基丙烯酸有利于胶粒的稳定和形成规则的核壳胶粒。半连续加料不会形成完全反转的核壳结构,但是,核层在反应过程中由于聚合物簇的迁移会造成形变。由于胶粒中聚合物浓度高,粘度大,因而胶粒形态变化受动力学影响甚大,羧基分布主要是由动力学确定的。     

SiO2包覆纳米CaCO3的透射电镜表征

在透射电子显微镜（TEM）电子衍射模式下，用适当孔径的物镜光阑选择非晶态SiO2的衍射区域，拍摄以溶胶一凝胶法制备的SiO2包覆纳米CaCO3的暗场像。与未经包覆SiO2的纳米CaCO3的暗场像作对比，可以看出经过SiO2包覆的纳米CaCO3粒子周围有一白色亮环，从而得到SiO3包覆层的暗场照片。用高分辨方法观察了包覆层与CaCO3粒子间的界面情况。     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Simple <Emphasis Type="Italic">b</Emphasis> ions have cyclic oxazolone structures. A neutralization-reionization mass spectrometric and computational study of oxazolone radicals

The 2-methyloxazol-5-on-2-yl radical (3) and its deuterium labeled analogs were generated in the gas-phase by femtosecond electron-transfer and studied by neutralization-reionization mass spectrometry and quantum chemical calculations. Radical 3 undergoes fast dissociation by ring opening and elimination of CO and CH(3)CO. Loss of hydrogen is less abundant and involves hydrogen atoms from both the ring and side-chain positions. The experimental results are corroborated by the analysis of the potential energy surface of the ground electronic state in 3 using density functional, perturbational, and coupled-cluster theories up to CCSD(T) and extrapolated to the 6-311 ++ G(3df,2p) basis set. RRKM calculations of radical dissociations gave branching ratios for loss of CO and H that were k(CO)/k(H) > 10 over an 80-300 kJ mol(-1) range of internal energies. The driving force for the dissociations of 3 is provided by large Franck-Condon effects on vertical neutralization and possibly from involvement of excited electronic states. Calculations also provided the adiabatic ionization energy of 3, IE(adiab) = 5.48 eV and vertical recombination energy of cation 3(+), RE(vert) = 4.70 eV. The present results strongly indicate that oxazolone structures can explain fragmentations of b-type peptide ions upon electron capture, contrary to previous speculations.     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

Xyloketal G,a Novel Metabolite from the Mangrove Fungus <Emphasis Type="Italic">Xylaria sp.</Emphasis> 2508

A novel metabolite 1, named xyloketal G, was isolated from cultures of marine derived mangrove fungus Xylaria sp. 2508. Its structure was elucidated by analysis of spectroscopic data.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 22–23, January–February, 2005.     

A new synthesis of 2-fluoro-1-naphthols

A general synthesis of 2-fluoro-1-naphthols in two steps from 1-indanones is reported. The 1-indanones are first converted to difluoromethyl 2-fluoro-1-napthyl ethers by reaction with difluorocarbene source, trimethylsilyl 2-fluorosulfonyl-2,2-difluoroacetate (TFDA). These ethers are then converted in high yield to the respective naphthols by heating with a mixture of acetic acid and 48% HBr.     

Electrochemical and spectroscopic characterization of surface sol-gel processes

(3-Mercaptopropyl)trimethoxysilane (MTS) forms a unique film on a platinum substrate by self-assembly and sol-gel cross-linking. The gelating and drying states of the self-assembled MTS sol-gel films were probed by use of electrochemical and spectroscopic methods. The thiol moiety was the only active group within the sol-gel network. Gold nanoparticles were employed to detect the availability of the thiol group and their interaction further indicated the physicochemical states of the sol-gel inner structure. It was found that the thiol groups in the open porous MTS aerogel matrix were accessible to the gold nanoparticles while thiol groups in the compact MTS xerogel network were not accessible to the gold nanoparticles. The characteristics of the sol-gel matrix change with time because of its own irreversible gelating and drying process. The present work provides direct evidence of gold nanoparticle binding with thiol groups within the sol-gel structures and explains the different permeability of "aerogel" and "xerogel" films of MTS on the basis of electrochemical and spectroscopic results. Two endogenous species, hydrogen peroxide and ascorbic acid, were used to test the permeability of the self-assembled sol-gel film in different states. The MTS xerogel film on the platinum electrode was extremely selective against ascorbic acid while maintaining high sensitivity to hydrogen peroxide in contrast to the relatively high permeability of ascorbic acid in the MTS aerogel film. This study showed the potential of the MTS sol-gel film as a nanoporous material in biosensor development.     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Computer optimization of separation in gas-solid chromatography,optimization model and computer-modified mapping procedure

Summary This paper proposes an optimization model for gas-solid chromatographic separations in a non-linear programming form and an approximate equation of the plate height for the model. A computer-modified mapping procedure is also described for searching the optimum separation conditions. Just five experiments and about 20 minutes of the computer time are needed to establish the optima of column temperature and of the carrier gas linear velocity. The relative deviation between the predicted and the experimental values was found to be within 20% for the plate heights, and within 1.5% for the retention times.