Notable shift of ultraviolet intensity on Sn-doped ZnO nanostructure fabricated by sol–gel method

Sn-doped ZnO (SZO) thin films are deposited by sol–gel dip-coating method with Sn content at 0 at.% and 1–15 at.% with an increment of 2 at.%. The structure and luminescence of the films are investigated. X-ray diffraction results indicate that all the SZO samples show preferential orientation along the (002) direction, and the scanning electron microscope exhibits that the surface morphology of the films change from nanoparticles to nanorods with increasing Sn concentration. X-ray photoelectron spectroscopy reveals that Sn exists as valence of +4 in the matrix. The photoluminescence peaks at 381 and 398 nm are observed in all the samples. The ratio of intensity of peak at 381 nm to that of peak at 398 nm differed markedly. The intensity of peak at 398 nm might be due to the response for the Sn atoms, while the intensity of peak at 381 nm is probably related to the quantum size effect.     

The effect of methyl group on the mechanical properties of hydrophobic association hydrogel

Hydrophobic association hydrogels were fabricated via micellar copolymerization of acrylamide and hydrophobic monomers lauryl (meth)acrylate (LA or LMA) in an aqueous solution of sodium dodecyl sulfate. The effect of methyl groups of hydrophobic monomers on the crosslinking network structure and mechanical behavior of the gels was investigated on the basis of rubber elastic theory. It was found that the LMA-gel exhibited higher effective crosslink density and elastic modulus. The methyl groups of hydrophobic monomers limited the flexibility of the methacrylate backbone in the association domain, which resulted in the increment of chains constraints. With the increase of stretch rate, the dissipated energy of LMA-gel increased more highly than that of LA-gel. In addition, the methyl group hindered the movement of polymer chains, leading to the lower recovery efficiency of dissipated energy for LMA-gel. In contract, the LA-gel exhibited a rapid response to external force, and possessed better elasticity and self-recovery property. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1505–1512     

Bimetallic Gold(I) Complexes with Ethynyl‐Helicene and Bis‐Phosphole Ligands: Understanding the Role of Aurophilic Interactions in their Chiroptical Properties

Monometallic gold(I)‐alkynyl‐helicene complexes ( 1 a , b ) and bimetallic gold(I)‐alkynyl‐helicene architectures featuring the presence ( 2 a , b ) or absence ( 3 a , b ) of aurophilic intramolecular interactions were prepared by using different types of phosphole ligands (mono‐phosphole L1 or bis‐phospholes L2 , 3 ). The influence of the Au^I d¹⁰ metal center(s) on the electronic, photophysical, and chiroptical properties of these unprecedented phosphole‐gold(I)‐alkynyl‐helicene complexes was examined. Experimental and theoretical results highlight the importance of ligand‐to‐ligand‐type charge transfers and the strong effect of the presence or absence of Au^I–Au^I interactions in 2 a , b .     

Synthesis and photovoltaic properties of main chain polymeric metal complexes containing 1,10‐phenanthroline metal complexes conjugating alkyl fluorene or alkoxy benzene by C═C bridge for dye‐sensitized solar cells

Four main chain polymeric metal complexes (P1–P4) based on 1,10‐phenanthroline metal complexes via the Heck coupling have been synthesized and characterized by Fourier transform infrared spectroscopy, ¹H NMR, UV–Vis absorption, photoluminescence spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, elemental analysis, and cyclic voltammetry. To investigate their photovoltaic properties, the dye‐sensitized solar cells based on these polymers dyes are studied, under the illumination of AM 1.5G, 100 mW/cm². The study results show the four polymers exhibit good thermally stable and the solar cells based on them have good device performance, and the maximum power conversion efficiency is up to 0.735% for the solar cells based on P3 with a short‐circuit current (J_sc) of 1.68 mA/cm² and an open‐circuit voltage (V_oc) of 0.62 V. Copyright © 2012 John Wiley & Sons, Ltd.     

Metal-free phthalocyanine single crystal: Solvothermal synthesis and near-infrared electroluminescence

A metal-free purple H₂Pc single crystal was synthesized by a facile solvothermal method, and its solubility and near-infrared (NIR) optical properties were also investigated due to its potential applications as a light-emitting layer for OLEDs. The H₂Pc single crystal is insoluble in 1-chlorine naphthalene and other organic solvents. It gives a wide absorption in the range from 620 nm to 679 nm and a wide emission in near 922 nm. As an active light-emitting layer, H₂Pc was employed to fabricate electroluminescent (EL) devices with a structure of ITO/NPB (30 nm)/Alq₃:H₂Pc (30 nm)/BCP (20 nm)/Alq₃ (20 nm)/Al. The emission center is at 936 nm when the H₂Pc doping concentration is 20 wt%. The doping concentration strongly governs the emission intensity. When doping concentration decreases from 10 wt% to 1 wt%, the emission intensity remarkably fades, and simultaneously the emission center undergoes a blue shift.     

Electrochemical Tri- and Difluoromethylation-Triggered Cyclization Accompanied by the Oxidative Cleavage of Indole Derivatives

Considering their unique roles in organic synthesis, and pharmaceutical and agrochemical applications, the development of fluoroalkylation, cyclization, and indole oxidative cleavage are important topics. Herein, an unprecedented electrochemical tri- and difluoromethylation/cyclization/indole oxidative cleavage process occurring in an undivided cell is presented. The protocol employs a readily prepared Langlois reagent as the fluoroalkyl source, affording a series of tri- or difluoromethylated 2-(2-acetylphenyl)isoquinoline-1,3-diones in good yields with excellent stereoselectivity. It is worth noting that this new methodology merges the fluoroalkylation/cyclization of N-substituted acrylamide alkenes with the oxidative cleavage of an indole C(2)=C(3) bond under external oxidant-free conditions.     

The effect of phosphate buffer solutions on uniconazole complexation with hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin

The inclusion complexes of uniconazole [(E)-1-(4-chlorophenyl)-4,4-dimethyl-2-(1,2,4-triazol-lyl)-1-penten-3-ol, UCZ] with two cyclodextrin derivatives, hydroxypropyl-β-cyclodextrin (HP-β-CD) and methylated-β-cyclodextrin (Me-β-CD), were prepared and characterized by ¹H NMR and FT-IR. The phase solubility of UCZ and HP-β-CD, UCZ and Me-β-CD, which displays the ability of CDs complexation and solubilization, was studied in aqueous solutions and phosphate buffer solutions (PBS) with different property pH values (6.2, 7.2, 8.0). The solubility results indicated that the pH of PBS showed more enhancement on the interaction of HP-β-CD and UCZ than Me-β-CD with the increasing pH value, and the optimal pH value for complexation of UCZ and HP-β-CD, UCZ and Me-β-CD was at 8.0 and at 7.2, respectively. These were also determined by UCZ release behavior and dissolution studies of the complexes in solid state.