环己烯和2-甲基戊烯-1在几种Y型分子筛上的吸附量热研究

用SETARAM热流式量热计测定了环己烯和2-甲基戊烯-1于室温下在NaY、CaY、R_EY和HY等几种分子筛上的微分吸附热。我们又用Benson基团加合法计算得到了生成仲碳离子和叔碳离子时的吸附热。根据实验测得的于不同吸附量时环己烯和2-甲基戊烯-1的吸附热之差值, 对它们在上述几种Y型分子筛上的吸附机理进行了讨论。     

Crystal Structure,Electrochemical Properties and Third-order Nonlinear Optical Response of 4-Methyloxy benzaldehyde Thiosemicarbazone and Its Copper(Ⅱ)Complex

Thecurrentsurgeofinterestinthefield0fnon-linearoptics(NL0)isderivedbothfromaquestforafundamentalunderstanding0fthenon-linearprocess,anditSimPortanceinthetechn0logyofphotonics.Amongnon-linearphen0mena,thethird-ordernon-linearophcsoccuPyanimPortantp0sihonbecauseitprovidesthemechanicsforophcalswitching,ophcallogic,andreal-hmeholograPhy"'.0rganicmaterialwithextendednconjugahonsandlargeRdelocalizahonsarewellknownastheimPortantmaterialsofachievinglargethird-ordernonlinearihes3.ForexamPle,thiosen…     

Synthesis α‐aminonitrile through anodic cyanation of N‐benzylpiperidine

Six‐membered cyclic α‐aminonitrile has been prepared from anodic cyanation of N‐benzylpiperidine. Good yields of α‐aminonitriles could be obtained through potentiostatic electrolysis under different conditions. The results also explain why high yield α‐aminonitriles could not be obtained under constant current electrolysis.     

A practical synthetic route to 4′-alkylaristeromycin derivatives: 4′-methylaristeromycin

(−)-(1S,4R)-4-Hydroxy-2-cyclopenten-1-yl acetate provided a convenient entry point for a 16-step chiral preparation of 4′-methylaristeromycin. This procedure is adaptable to a number of carbocyclic nucleosides with a diversity of substitution at C-4′ and C-5′ and a variety of heterocyclic bases.     

一种新的库仑微水滴定仪的设计方法

在传统微库仑滴定仪原理的基础上，利用８７５１单片机和微机，采用对电解电流时间调制的方法以及测量精度为准则判断滴定终点，从而大大地提高了仪器的测量精度和重复性。     

Morphology and thermal properties of a PC/PE blend with reactive compatibilization

Reactive compatibilization of immiscible polymers is becoming increasingly important and hence a representative study of a polycarbonate/high density polyethylene (PC/HDPE) system is the focus of this paper. A grafted copolymer PC‐graft‐ethylene‐co‐acrylic acid (PC‐graft‐EAA) was generated as a compatibilizer in situ during processing operation by ester and acid reaction between PC and ethylene‐acrylic acid (EAA) in the presence of the catalyst dibutyl tin oxide (DBTO). As the polyethylene (PE) matrix does not play any part during the synthesis of the copolymer and since PC and EAA are also immiscible, to simplify the system, the influence of this copolymer formation at the interface between PC and EAA on rheological properties, phase morphology, and crystallization behavior for EAA/PC binary blends was first studied. The equilibrium torque increased with the DBTO content increasing in EAA/PC blends on Haake torque rheometer, indicating the in situ formation of the graft copolymer. Scanning electron microscopy (SEM) studies of cryogenically fractured surfaces showed a significant change at the distribution and dispersion of the dispersed phase in the presence of DBTO, compared with the EAA/PC blend without the catalyst. Differential scanning calorimetry (DSC) studies suggested that the heat of fusion of the EAA phase in PC/EAA blends with or without DBTO reduced with the formation of the copolymer compared with pure EAA. Then morphological studies and crystallization behavior of the uncompatibilized and compatibilized blends of PC/PE were studied as functions of EAA phase concentration and DBTO content. Morphological observations in PC/PE blends also revealed that on increasing the EAA content or adding the catalyst DBTO, the number of microvoids was reduced and the interface was intensive as compared to the uncompatibilized PC/PE blends. Crystallization studies indicated that PE crystallized at its bulk crystallization temperature. The degree of crystallinity of PE phase in PC/PE/EAA blends was also reduced with the addition of EAA and DBTO compared to the uncompatibilized blends of PC/PE, indicating the decrease in the degree of crystallinity was more in the presence of PC‐graft‐EAA. Copyright © 2007 John Wiley & Sons, Ltd.     

双电层相互重叠时蒙脱胶体表面阴离子的负吸附

本文用Ag-AgCl电极判断平衡,测定双电层处于不同重叠程度下肢体表面阴离子的负吸附量Γ.结果表明,胶体表面双电层相互重叠程度可由两胶体表面间的中点电位φd与外Helmhotz面处的电位φd之比表征;阴离子负吸附随双电层重叠程度和电解质浓度的增加而显著减小.     

动态法测定耐硫甲烷化催化剂的有效导热系数

本文采用动态法原理，用单丝直径为０．２ｍｍ的铜－录铜热偶作为测温元件，在３１３－５３３Ｋ温度区间，测定了耐硫甲烷化催化剂的有地热系数。用石蜡和锡作为参比物，对所用仪器及实验方法进行了可靠性检验。实验表明，动态法是测定多孔硫化物催化剂导热系数的有效方法。其精度符合工程要求，亦能用于其它材料导热系数的测定。对所测数据用单纯形方法优化拟合，得到大于３５３Ｋ范围内的有效导热系数的经验公式。     

Olefin oxygenation by the hydroperoxide adduct of a nonheme manganese(IV) complex: epoxidations by a metallo-peracid produces gentle selective oxidations

The reactive intermediates and mechanisms of oxygenation of olefins by manganese complexes were investigated by treating olefins with newly synthesized [MnIV(Me2EBC)(OH)2](PF6)2 in the presence and absence of peroxide and by studying its catalytic epoxidation reaction in normal aqueous solution and, individually, with isotopically labeled H218O, 18O2, and H218O2. The manganese oxo species is not the reactive intermediate for the oxygen transfer process mediated by this manganese complex. A novel manganese(IV) peroxide intermediate, MnIV(Me2EBC)(O)(OOH)+, was captured by mass spectrometry and is proposed as the intermediate that oxygenates olefins in this catalytic system.     

受体生物传感器的研究进展

综述了利用各种生物材料中的膜受体蛋白作为分子识别元件的受体生物传感器研究的最新进展。主要从离体受体传感器、细胞受体传感器和神经组织受体传感器3个方面，讨论了它们的特点和存在的问题，并展望了受体生物传感器未来的发展方向。共引用文献42篇。