量子受限效应和对称性效应对硅光子晶体禁带的影响

光子晶体不仅可以用来调控自发辐射, 还可以用来控制光的传输和局域. 采用平面波展开法进行模拟计算, 分析硅背景下的二维正方、三角晶格光子晶体散射基元的形状和空间取向对光子禁带的影响. 计算结果表明: 对称性和量子受限效应之间的竞争是导致光子晶体禁带宽度发生变化的原因.     

单轴应变硅N沟道金属氧化物半导体场效应晶体管电容特性模型

电容特性模型是单轴应变硅金属氧化物半导体场效应晶体管(Si MOSFET)和电路进行瞬态分析、交流小信号分析、噪声分析等的重要基础. 本文首先建立了单轴应变Si NMOSFET 的16 个微分电容模型, 并将微分电容的仿真结果与实验结果进行了比较, 验证了所建模型的正确性. 同时对其中的关键性栅电容C_gg 与应力强度、偏置电压、沟道长度、栅极掺杂浓度等的关系进行了分析研究. 结果表明, 与体硅器件相比, 应变的引入使得单轴应变Si NMOSFET器件的栅电容增大, 随偏置电压、沟道长度、栅极掺杂浓度的变化趋势保持不变.     

双壳层靶丸金属层电沉积装置设计

设计了一种新型双壳层靶丸金属层电沉积装置,借助计算机模拟了其设计原理,分析了微球的运动及镀层的生长模式,介绍了其各部分结构和功能。借助理论计算,确定了镀槽的整体尺寸,其中槽体半径确定为5cm。镀槽的特殊结构使微球上部镀层沉积速度较快,结合小球的自转及围绕圆柱体的公转运动实现镀层均匀沉积。镀液及微球的运动模式使镀液流速合并了主盐浓度、小球平动速度、小球转动速度三个关键参数,简化了对沉积过程的控制。在新旧装置上进行了电沉积实验,制备出了镀层厚度分别为9μm和2μm的空心金微球,结果表明:使用设计的装置可制备表面质量良好、厚度均匀且可控的金属微球,镀层厚度由沉积时间、金属层密度、镀液比重、微球芯轴的等效密度等决定。     

Sulfur Immobilized in Hierarchically Porous Structured Carbon as Cathodes for Lithium–Sulfur Battery with Improved Electrochemical Performance

In order to overcome the main obstacles for lithium–sulfur batteries, such as poor conductivity of sulfur, polysulfide intermediate dissolution, and large volume change generated during the cycle process, a hard‐template route is developed to synthesize large‐surface area carbon with abundant micropores and mesopores to immobilize sulfur species. The microstructures of the C/S hybrids are investigated using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Raman spectroscopy, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherms, and electrochemical impedance spectroscopy techniques. The large surface and porous structure can effectively alleviate large strain due to the lithiation/delithiation process. More importantly, the micropores can effectively confine small molecules of sulfur in the form of S_2–4, avoiding loss of active S species and dissolution of high‐order lithium polysulfides. The porous C/S hybrids show significantly enhanced electrochemical performance with good cycling stability, high specific capacity, and rate capability. The C/S‐39 hybrid with an optimal content of 39 wt% S shows a reversible capacity of 780 mA h g^?1 after 100 cycles at the current density of 100 mA g^?1. Even at a current density of 5 A g^?1, the reversible capacity of C/S‐39 can still maintain at 420 mA h g^?1 after 60 cycles. This strategy offers a new way for solving long‐term reversibility obstacle and designing new cathode electrode architectures.     

Spontaneous Ga incorporation in ZnO nanowires epitaxially grown on GaN substrate

Surface‐diffusion‐induced spontaneous Ga incorporation process is demonstrated in ZnO nanowires grown on GaN substrate. Crucially, contrasting distributions of Ga atoms in axial and radial directions are experimentally observed. Ga atoms uniformly distribute along the ～10 μm long ZnO nanowire and show a rapidly gradient distribution in the radial direction, which is attributed substantially to the difference between surface and volume diffusion. The understanding on the incorporation process can potentially modulate doping and properties in semiconductor nanomaterials.

     

关于N-苯基-萘胺的光分解过程

采用ESR方法研究了α-和β-N-苯基取代萘胺在苯溶液中的分解过程及其反应中间体.结果表明,有三种自由基被检测到,即H,C₁₀H·₇和C₆H·₅(H)N·自由基.其中值得注意的是萘自由基的生成,这意味着在一定的光解条件下,苯基萘胺分子中的C-N键可发生断裂,萘基可从氮原子上断裂下来.同时,通过调节自旋捕捉剂的浓度与添加光敏剂,可以明显地改变三种自旋捕获物的相对生成比例,借此得到三种自由基结构与光稳定性的信息.此外,本文还结合量子化学的计算讨论了此光解过程各种自由基生成的可能性.     

钛宝石再生放大器实验研究

分析了啁啾脉冲在钛宝石再生放大器中的能量增益与泵浦光及信号光光束口径的关系。并用不同能量的调Ｑ倍频ＮｄＹＡＧ激光器的５３２ｎｍ光为泵浦光，测量了２ＴＷ钛宝石激光系统中钛宝石再生放大器在无注入信号脉冲时和有注入信号脉冲时的脉冲建立时间及相应的输出能量大小。再生放大器的增益为２×１０７。     

用序列二次规划法设计ICF 靶区光路

 运用序列二次规划法设计了靶区光路。由ICF 柱面靶间接驱动实验对多路激光束排布的要求, 建立靶区数学模型, 用本文设计结果构筑光路排布线框实体。该三维线框以特征线代表60路激光驱动光束实体, 以特征线段的转折点代表240面反射镜的空间位置。     

Efficient self-seeding of a pulsed Ti3+:Al2O3 laser

We describe the design considerations and operating characteristics of a compact, widely tunable, narrow-linewidth, megawatt-class pulsed laser system based on Ti(3+):Al(2)O(3) (Ti:sapphire) pumped by the second harmonic of a 1.06-mum Nd:YAG laser. The system delivers 10 mJ in a 5-ns near-transform-limited single-longitudinal-mode (SLM) pulse with a threshold of 20 mJ and a slope efficiency greater than 40%. By the technique of self-seeding, in which a portion of the gain medium's spontaneous fluorescence is coupled back to the laser cavity, SLM operation may be obtained across the entire gain profile of Ti:sapphire with a minimum number of optical components and without external seeding.     

一种可用于分析任意介电常数张量的各向异性波导导模的二维时域有限差分模型

为分析具有任意介电常数张量的各向异性波导的导模，本文通过把简化的二维时域有限差分（２－ＤＦＤＴＤ）法扩展至任意各向异性介质，提出了一种以Ｄ、Ｅ和Ｈ场为基础的统一的简化２－ＤＦＤＴＤ模型．利用该模型，研究了简化的复数２－ＤＦＤＴＤ方法与实变数２－ＤＦＤＴＤ方法之间的关系．文中还讨论了复变数方法和实变数方法的激励技术．