Determination of uranium by XRF analysis following its preconcentration with some organic precipitants

The determination of uranium in natural waters by XRF analysis after its preconcentration with some organic precipitants is described.¹⁰⁹Cd source is used for the excitation of L-series X-rays of uranium. Separation yield, kinetics of coprecipitation and the possibility of preparing thin-layer samples for XRF analysis were studied in detail for uranium concentration with α-nitroso-β-naphtol, methylene blue with ammonium thiocyanate, tannin with urotropine and other precipitants. A procedure using coprecipitation of uranium with α-nitroso-β-naphtol from 500 ml samples of surface or waste, waters is proposed.     

Aqueous two-phase extraction as an effective tool for isolation of geniposide from gardenia fruit

Natural products are normally obtained by organic solvent extraction and many subsequent chromatographic separations. Compounds of interest are often isolated with very low yield and limited purity. An aqueous two-phase extraction process combined with a simple ethanol treatment, for removing excess inorganic salt, has been developed for preparation of geniposide from gardenia. The system was comprised of PE62, a random copolymer composed of 20% ethylene oxide and 80% propylene oxide, KH2PO4 and ethanol. To find optimal conditions, the partition behavior of geniposide under an aqueous two-phase system was investigated. Various factors were considered, including the concentration of salt, the concentration of polymer, the sample loading, and the addition of ethanol. The experimental results demonstrated that increasing salt concentration or decreasing PE62 concentration results in enhancement of the geniposide partition in the salt-rich phase. The addition of ethanol and higher sample loading also promoted the partition efficiency of geniposide. Based on this study, an optimized system containing 5% PE62, 7.5% KH2PO4, and 10% ethanol was tested on a large-scale extraction. A 39.0-g aliquot of final product (in powder form) with 77% purity of geniposide can be effectively extracted from 500 g of gardenia fruit. This process is proved to be useful for industrial application of geniposide preparation.     

Kinetic determination of tellurium based on its inhibitory effect on the palladium(II)-catalysed reaction between pyronine G and hypophosphite ion

A kinetic method for the determination of Te based on its inhibitory effect on the PdII-catalysed reaction between pyronine G and H2PO2- is described. The influence of experimental variables on the rate of the process and the potential interfering effect of a large number of ions has been studied. Under the selected experimental conditions: 6 x 10(-5) M pyronine G; 0.6 M H2PO2-; pH 2.6, adjusted with Britton-Robinson buffer; 0.80 microgram ml-1 of PdII; and a temperature of 22 +/- 0.2 degrees C, Te was determined in the concentration range 0.08-0.85 microgram ml-1. The method was applied to the determination of Te in waters and lead concentrates.     

线性低密度聚乙烯在与丁苯橡胶的共混体系中的结晶行为

本工作采用DSC、X-射线衍射、小角激光光散射、偏光显微镜等手段,研究了线性低密度聚乙烯/丁苯橡胶共混体系中聚乙烯的结晶结构、平衡熔点和结晶动力学。     

Spectrophotometric determination of boron with an azomethine H derivative

Summary An azomethine H derivative, 1-(2,4-dihydroxybenzylidene-amino)-8-hydroxynaphthalene-3,6-disulphonic acid (azomethine HR) was examined and proposed as a spectrophotometric reagent for boron, as compared with azomethine H. Azomethine HR reacts with boron in aqueous solution (pH 7.5) to form a yellow complex having an absorption maximum at 425 nm. The sensitivity is 3.5-fold greater than with azomethine H when the same reagent concentration is applied. Basic conditions for the determination of boron have been worked out. The method is applicable to sea and hot spring waters. The standard deviation is ±2.1%.

---

Spektralphotometrische Borbestimmung mit einem Azomethin H-Derivat

     

Effects of <Emphasis Type="Italic">L</Emphasis>-Carnitine on Sucrose-Induced Hyperlipidaemia

Summary. L-Carnitine, L-(−)-β-hydroxy-γ-trimethylaminobutyrate, plays an important role as a factor necessary for the transport of long-chain fatty acids into the mitochondria. In order to investigate the influence of L-carnitine on hyperlipidaemias, the experimental model of the sucrose-induced hypertriglyceridaemia of the rat was used. In these experiments L-carnitine in the dose of 11 mg per day and 100 g body weight (over the period of 1 week) was able to antagonize the sucrose-induced hypertriglyceridaemia and the increase of serum free fatty acid level in female rats of the Wistar strain. Carnitine administration did not change the activities of lipogenic enzymes and fatty acid synthesis in the liver. However, L-carnitine increases the rate of hepatic fatty acid oxidation. Our results indicate a hypotriglyceridemic and free fatty acid lowering effect of L-carnitine, and suggest the use of this compound in the therapy of hyperlipidaemias.     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

Catalytic wet air oxidation of oleic acid on ceria-supported platinum catalyst.effect of pH

Summary Catalytic wet air oxidation (CWAO) of oleic acid was carried out in a batch reactor on platinum supported ceria catalyst (Pt/CeO₂). Oleic acid is a water insoluble linear unsaturated fatty acid of 18 carbon atoms. To increase the homogeneity of the solution by saponification, the influence of NaOH additions in oleic acid CWAO mechanism and catalyst performances have been investigated. The oxidation of such molecule occurs by two types of mechanisms: successive carboxy-decarboxylation which leads essentially to CO₂and/or C-C bonds splitting in the alkyl chain inducing a high formation of acetic acid. With or without NaOH, the 5%Pt/CeO₂catalyst is active in the conversion of oleic acid and selective to carbon dioxide. In alkaline medium, oleic acid is initially saponified which increases the solubility of the reactant before it to be oxidized. Finally the oxidation is slightly delayed by the presence of NaOH. The catalyst characterizations show no significant difference before and after reaction.</o:p>