Fully Synthetic Self‐Adjuvanting Thioether‐Conjugated Glycopeptide?Lipopeptide Antitumor Vaccines for the Induction of Complement‐Dependent Cytotoxicity against Tumor Cells

Glycopeptides of tumor‐associated mucin MUC1 are promising target structures for the development of antitumor vaccines. Because these endogenous structures were weakly immunogenic, they were coupled to immune‐response‐stimulating T‐cell epitopes and the Pam₃Cys lipopeptide to induce strong immune responses in mice. A new thioether‐ligation method for the synthesis of two‐ and three‐component vaccines that contain MUC1 glycopeptides as the B‐cell epitopes, a T‐cell epitope peptide, and the Pam₃CSK₄ lipopeptide is described. The resulting fully synthetic vaccines were used for the vaccination of mice, either in a liposome with Freund′s adjuvant or in aqueous PBS buffer. The three‐component vaccines that contained the Tetanus Toxoid P2 T‐cell epitope peptide induced strong immune responses, even when administered just in PBS. By activation of the complement‐dependent cytotoxicity (CDC) complex, the antisera induced the killing of tumor cells.     

Underpotential Deposition‐Induced Synthesis of Composition‐Tunable Pt?Cu Nanocrystals and Their Catalytic Properties

Pt? Cu alloy octahedral nanocrystals (NCs) have been synthesized successfully by using N,N‐dimethylformamide as both the solvent and the reducing agent in the presence of cetyltrimethylammonium chloride. Cu underpotential deposition (UPD) is found to play a key role in the formation of the Pt? Cu alloy NCs. The composition in the Pt? Cu alloy can be tuned by adjusting the ratio of metal precursors in solution. However, the Cu content in the Pt? Cu alloy NCs cannot exceed 50 %. Due to the fact that Cu precursor cannot be reduced to metallic copper and the Cu content cannot exceed 50 %, we achieved the formation of the Pt? Cu alloy by using Cu UPD on the Pt surface. In addition, the catalytic activities of Pt? Cu alloy NCs with different composition were investigated in electrocatalytic oxidation of formic acid. The results reveal that the catalytic performance is strongly dependent on Pt? Cu alloy composition. The sample of Pt₅₀Cu₅₀ exhibits excellent activity in electrocatalytic oxidation of formic acid.     

Fast Reductive Amination by Transfer Hydrogenation “on Water”

Reductive amination of various ketones and aldehydes by transfer hydrogenation under aqueous conditions has been developed, by using cyclometallated iridium complexes as catalysts and formate as hydrogen source. The pH value of the solution is shown to be critical for a high catalytic chemoselectivity and activity, with the best pH value being 4.8. In comparison with that in organic solvents, the reductive amination in an aqueous phase is faster, and the molar ratio of the substrate to the catalyst (S/C) can be set as high as 1×10⁵, the highest S/C value ever reported in reductive amination reactions. The catalyst is easy to access and the reaction is operationally simple, allowing a wide range of ketones and aldehydes to react with various amines in high yields. The protocol provides a practical and environmental friendly new method for the synthesis of amine compounds.     

悬浮聚合法制备罗丹明B磁性分子印迹微球及其性能

以罗丹明B（RhB）为模板分子,采用悬浮聚合法制备了罗丹明B磁性印迹微球（M-MIPs）,对其进行了结构表征,并与本体聚合的印迹材料进行了对比。 结果表明,2种聚合物中的Fe3O4均呈现良好的晶形。 悬浮法制得的M-MIPs呈球形,粒径在50 μm左右,其饱和磁化强度(5.406 emu/g)比本体法制得的M-MIP（1.772 emu/g）更大,有利于快速磁性分离。 悬浮法所得M-MIPs的吸附量是本体法所得M-MIPs吸附量的近1.8倍,且在吸附速率、选择性、重复使用性能等方面,均明显优于后者。 2种材料均符合Langmuir吸附模型;悬浮法所得M-MIPs对RhB的吸附过程更符合二级动力学方程,而本体法所得M-MIPs较符合一级动力学方程。 悬浮法制得的M-MIPs更适合于RhB的识别、富集与分析应用。     

Effect of biaxial orientation on dielectric and breakdown properties of poly(ethylene terephthalate)/poly(vinylidene fluoride‐co‐tetrafluoroethylene) multilayer films

Polymer films with enhanced dielectric and breakdown properties are essential for the production of high energy density polymer film capacitors. By capitalizing on the synergistic effects of forced assembly nanolayer coextrusion and biaxial orientation, polymer multilayer films using poly(ethylene terephthalate) (PET) and a poly(vinylidene fluoride‐co‐tetrafluoroethylene) [P(VDF‐TFE)] copolymer were produced. These films exhibited breakdown fields, under a divergent field using needle/plane electrodes, as high as 1000 kV mm^?1. The energy densities of these same materials, under a uniform electric field measured using plane/plane electrodes, were as high as 16 J cm^?3. The confined morphologies of both PET and P(VDF‐TFE) were correlated to the observed breakdown properties and damage zones. On‐edge P(VDF‐TFE) crystals induced from solid‐state biaxial stretching enhanced the effective P(VDF‐TFE) layer dielectric constant and therefore increased the dielectric contrast between the PET and P(VDF‐TFE) layers. This resulted in additional charge buildup at the layer interface producing larger tree diameters and branches and ultimately increasing the breakdown and energy storage properties. In addition to energy storage and breakdown properties, the hysteresis behavior of these materials was also evaluated. By varying the morphology of the P(VDF‐TFE) layer, the low‐field dielectric loss (or ion migration behavior) could be manipulated, which in turn also changed the observed hysteresis behavior. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 882–896     

Open tubular columns with mixed‐mode reversed‐phase and weak anion‐exchange stationary phase for capillary electrochromatography

Columns for open tubular capillary electrochromatography, coated with a mixed‐mode (RP/ion‐exchange) stationary phase, were prepared by using the sol–gel method. The synthetic procedure was optimized by changing the ratios of tetraethoxysilane, octyltriethoxysilane, and 3‐aminopropyltriethoxysilane in the initial sol. SEM studies reveal that a coating with about 400 nm thickness can be obtained. The inner surface properties of these capillaries were probed by measuring the EOF as a function of pH. The surface of this stationary phase contains octyl, amine, and residual silanol moieties; the amine and silanol groups determine the net charge on the inner surface of the capillary and can produce a switchable EOF (anodal/cathodal). The performances of the columns were evaluated by open tubular capillary electrochromatography using a wide range of compounds (polycyclic aromatic hydrocarbons, aromatic acids, and aromatic amines).     

SPE–HPLC–MS/MS method for the trace analysis of tobacco‐specific N‐nitrosamines and 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol in rabbit plasma using tetraazacalix[2]arene[2]triazine‐modified silica as a sorbent

Tobacco‐specific N‐nitrosamines (TSNAs), including N′‐nitrosonornicotine, 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanone, N′‐nitrosoanatabine, and N′‐nitrosoanabasine, have been implicated as a source of carcinogenicity in tobacco and cigarette smoke. We present a rapid and effective method comprising SPE based on tetraazacalix[2]arene[2]triazine‐modified silica as sorbent and analysis with HPLC–MS/MS for the determination of TSNAs and 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanol (NNAL), a metabolite of 4‐(methylnitrosamino)‐1‐(3‐pyridyl)‐1‐butanone, in rabbit plasma. The linear dynamic ranges were 10–2000 pg/mL for NNAL and 4–2000 pg/mL for the four TSNAs with good correlation coefficients (>0.9965). The LODs were in the range of 0.9–3.7 pg/mL, and the LOQs were between 2.9 and 12.3 pg/mL. The accuracies of the method were also evaluated and found to be in the range of 90.1–113.3%. This method is promising to be applied to the preconcentration and determination of TSNAs and NNAL in smoke and human body fluids.     

One-Pot Synthesis of 1H-Benzimidazole Derivatives Using Thiamine Hydrochloride as a Reusable Organocatalyst

A simple and efficient one-pot synthesis of 1H-benzimidazole derivatives using thiamine hydrochloride (VB₁) as the organocatalyst from o-phenylenediamine and aldehyde in dimethylformamide is described. Compared to classical reaction conditions, this new method consistently has the advantages of excellent yields, metal-ion-free procedure, and good recovery and reusablity of catalyst.     

Application of poly(vinylphenyltrimethylammonium tribromide) resin as an efficient polymeric brominating agent in the α-bromination and α-bromoacetalization of acetophenones

The applications of a new supported tribromide reagent based on poly(vinylbenzyltrimethylammonium hydroxide) resin (Amberlite 717) were reported. This supported tribromide resin was used directly in α-bromination and α-bromoacetalization of acetophenones without any other catalyst under mild conditions. The effects of solvents and the amount of the supported tribromide resin on the reactions were investigated. Under the optimal conditions, most of α-bromo and α-bromoacetal of acetophenones were selectively obtained in excellent yields.     

Three‐Dimensional Architectures Incorporating Stereoregular Donor–Acceptor Stacks

We report the synthesis of two [2]catenane‐containing struts that are composed of a tetracationic cyclophane (TC⁴⁺) encircling a 1,5‐dioxynaphthalene (DNP)‐based crown ether, which bears two terphenylene arms. The TC⁴⁺ rings comprise either 1) two bipyridinium (BIPY²⁺) units or 2) a BIPY²⁺ and a diazapyrenium (DAP²⁺) unit. These degenerate and nondegenerate catenanes were reacted in the presence of Cu(NO₃)₂?2.5 H₂O to yield Cu‐paddlewheel‐based MOF‐1050 and MOF‐1051. The solid‐state structures of these MOFs reveal that the metal clusters serve to join the heptaphenylene struts into grid‐like 2D networks. These 2D sheets are then held together by infinite donor–acceptor stacks involving the [2]catenanes to produce interpenetrated 3D architectures. As a consequence of the planar chirality associated with both the DNP and hydroquinone (HQ) units present in the crown ether, each catenane can exist as four stereoisomers. In the case of the nondegenerate (bistable) catenane, the situation is further complicated by the presence of translational isomers. Upon crystallization, however, only two of the four possible stereoisomers—namely, the enantiomeric RR and SS forms—are observed in the crystals. An additional element of co‐conformational selectivity is present in MOF‐1051 as a consequence of the substitution of one of the BIPY²⁺ units by a DAP²⁺ unit: only the translational isomer in which the DAP²⁺ unit is encircled by the crown ether is observed. The overall topologies of MOF‐1050 and MOF‐1051, and the selective formation of stereoisomers and translational isomers during the kinetically driven crystallization, provide evidence that weak noncovalent bonding interactions play a significant role in the assembly of these extended (super)structures.