茶叶定性和定量近红外光谱分析方法研究

分别采集了茉莉花茶、苦丁茶、龙井和铁观音4个种类茶叶共120个样本,利用NIRSystems6500型近红外光谱分析仪对样本进行光谱测量,应用近红外光谱分析技术对茶叶进行定性和定量分析。采用主成分分析法,结合聚类分析法,对4种类别的茶叶进行定性鉴别,通过对不同光谱数据预处理方式和不确定因子系数进行比较,确立了最优定性判别定标模型。同时,采用修正的偏最小二乘法,比较不同光谱预处理方法对定标模型的影响,建立了茶叶中水分、茶多酚和咖啡碱含量的定量分析模型,并对未知样本进行预测。定性分析模型的种类识别准确率达到100％,定量分析模型的决定系数均大于0.91,相对分析误差RPD均大于3。结果表明,利用NIRS分析技术可以快速定性和定量分析鉴别茶叶的类别和成分含量。     

亮氨酸与异亮氨酸的低频集体振动的太赫兹光谱研究

太赫兹(THz)波是指频率在0.1～10 THz频段的电磁波。太赫兹光谱技术不同于以往的检测手段,可以用于检测氨基酸同分异构体,反映物质的分子结构和构型,对食品安全和药品药性控制有着重要的意义。亮氨酸与异亮氨酸属于同系的同分异构体,它们具有近似的分子结构,但物理化学性质有很大的差别。生物大分子的太赫兹吸收与其分子间氢键和分子内氢键的振动和转动能级相关的偶极跃迁有关,可以利用分子偶极跃迁进行生物分子的指纹识别。采用太赫兹时域光谱(THz-TDS)和傅里叶红外光谱(FTIR),对亮氨酸和异亮氨酸进行了测量。在中红外波段亮氨酸与异亮氨酸的吸收光谱几乎完全重叠,而在太赫兹频波段可以观察到它们的光谱存在明显差异,因此太赫兹光谱能够作为快速准确鉴别这两种物质的方法。采用密度泛函理论(DFT)对亮氨酸和异亮氨酸的低频集体振动模式进行理论模拟,并对其太赫兹光谱进行研究和讨论。通过比较实验和理论结果,计算得到的峰位与实验结果可以互相印证。     

研究堆慢正电子源构建中的关键机理问题

研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.     

Teleportation of three-dimensional single particle state in noninertial frames

Considering the spin degree of freedom of the Dirac field, we study the entanglement behavior of a different class of communication channel and teleportation of three-dimensional single particle state in noninertial frames. Numerical analysis shows that the communication channel in our scheme can offer enough distillable entanglement for the teleportation protocol. Moreover, the teleportation protocol could work well if Rob＇s acceleration is not very big, but the fidelity of the teleportation is still reduced due to the Unruh effect.     

激光诱导击穿光谱脉冲激光功率锁定的研究

激光诱导击穿光谱(laser-induced breakdown spectroscopy,LIBS)在煤质在线监测方面展现了突出的应用前景和研究价值。针对该技术在实际应用中会由于脉冲激光功率起伏导致的长期测量稳定性差的问题,建立了闭环负反馈式脉冲激光功率锁定装置,采用激光功率负反馈信号控制和锁定Nd∶YAG激光器输出功率。实验研究了不同分光比例脉冲激光器锁定在设定输出功率,同一分光比例激光器锁定在不同输出功率以及长时间运行时的功率锁定。结果表明,不同的分光比例对激光输出功率的锁定效果影响不大,分光比例越小,稳定速度越快;同一分光比例实现激光脉冲功率不同预设值的锁定以及在长时间运行时,采用此装置进行功率锁定后,激光输出功率处于预设区间内,RSD值由自由运行时的2.4%降低至1.1%。     

基于机器视觉的布匹瑕疵在线检测

为实现图案布匹瑕疵在编织过程中的实时检测,提出一种通过区域差影自动分割瑕疵区域的检测方法。通过求取水平和竖直两方向距离叠加函数极值,并对极值做权重分析,精确求取纹理基元周期;根据所求纹理基元周期确定区域差影的区域大小,并对区域差影图像求取梯度,再进行标记分水岭分割,能够快速准确地分割出纹理瑕疵区域。实验结果表明:该算法能够准确地检测出纹理布匹瑕疵的位置,检测一帧用时200 ms,准确率均达98%以上,实时性强,检测精度高,满足工业现场要求。     

Quantum-correlated photon pair generation in tellurite microstructured optical fibers

We theoretically investigated the generation of quantum-correlated photon pair through spontaneous four-wave mixing in tellurite microstructured optical fiber (MOF). We evaluated the performance of photon pair generation in tellurite fibers based on Raman gain coefficient spectra. It was shown that the TBSN16P6W tellurite fiber provided a low Raman noise on correlation photon generation over a wide pump-idler detuning range. We can choose proper tellurite composition to obtain a low Raman gain window over wide range for correlated photon pair generation. We also designed the tellurite MOF structure to obtain a small dispersion value with high nonlinear coefficient at telecommunication wavelengths, thus realize efficient quantum-correlated photon pair generation.     

多组全动型变焦系统新型设计

为了寻找简单的多组全动型变焦系统的解算方法及降低全动型变焦距系统设计时对经验的过分依赖,提出了一种全新的方法来计算系统组元的光焦度分配。以组元之间的间隔为初始量,把组元的运动形式作为自由量,通过计算公式求出满足间隔要求的光焦度分配和组元运动形式。该方法在一定程度上降低了变焦系统光焦度分配的难度,更重要的是,为探寻新的变焦运动方式提供了一种新的思路。在得到系统的光焦度分配之后又推导出一种求解系统组元移动曲线的简单方法。为了验证该方法的可行性,设计了一个四组式全动型变焦系统。所设计系统优化后的光焦度分配值和计算的结果都很接近,并且得到了组元的移动曲线,从而验证了该方法的正确性。     

Spin frustration-related behavior of mixed spin diamond chain

The magnetization of mixed spin-1/2, 1 Ising diamond chain with antiferromagnetic spin exchange interaction has been investigated by using the Monte Carlo simulation. Magnetization behaviors with different antiferromagnetic interactions are simulated under magnetic field at low temperature. The behaviors are studied in two different cases. In one case the absolute value of the interaction between two spin-1/2 atoms is the largest and in the other case it is not the largest. Multiple plateaus of magnetization M, such as plateaus at M=±1, M=0 and M=±0.566 are obtained. The plateaus at M=±0.566 correspond to two metastable states. The M=0 plateau may disappear at some specific values of spin exchange interactions. The spin configurations were checked when the plateaus appear. The dimmer and trimmer states are found.     

In situ functionalized self-assembled monolayer surfaces for selective chemical vapor deposition of copper

Recent studies show that the self-assembled monolayer (SAM) is well suited to control the selectivity of chemical vapor deposition (CVD). Here, we reported the selective CVD for copper on the functionalized SAM surfaces (with -SH, -SS-, and -SO₃H terminal groups). The -SS- and -SO₃H terminal group surfaces were obtained through in situ chemical transformation of -SH terminal group surface of a 3-mercaptopropyltrimethoxysilane-SAM (MPTMS-SAM). As a result, the -SS- terminal group surface reduces copper deposition and the -SO₃H terminal group surface enhances copper deposition comparing to the -SH terminal group surface. In addition, the MPTMS-SAM was irradiated by UV-light through a photo mask to prepare SH-group and OH-group regions. Then, copper films were deposited only on the SH-group region of the substrate in chemical vapor deposition. Finally, patterns of copper films were formed in the way of UV-light irradiation. These results are expected for use of selective deposition of copper metallization patterns in IC manufacturing processes.