Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

铁催化剂在碳—氧反应中的热重研究

采用动态TG－DTG，研究了铁催化剂的制备方法、前驱化合物的 种类及 热处理对其在碳－氧反应中催化活性的影响。观察到在干混法制备催化剂时，所用铁盐分解温度越低活性越高。此外还发现，热处理可明显提高由分解温度高的含氧铁盐制备的 催化剂的活性，但对于不含氧铁盐和分解温度低的含氧铁盐无影响。     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

2-羟丙基三甲基氯化铵壳聚糖的制备及其性能研究

以脱乙酰度为95.37%的壳聚糖(CTS)为原料,异丙醇为溶剂,2,3-环氧丙基三甲基氯化铵为改性剂,于80℃反应12 h合成了水溶性季铵盐2-羟丙基三甲基氯化铵壳聚糖(HACC)。HACC的吸水保水性是CTS的2倍～3倍,加入化妆品中培养2周后菌落总数少于100 CFU.g-1。     

磁性纳米标记检测技术在生物医学即时检测领域的研究进展

基于磁性纳米材料的磁标记检测技术具有灵敏度高、线性范围广、信号检测便捷等优点。由于生物样品自身磁背景信号极低,相比于光学标记检测技术,磁标记检测技术在蛋白质、核酸、细胞、病原体及生物组织检测中均表现出更高的灵敏度,在生物医学即时检测领域展现了良好的应用前景。该文围绕磁性纳米粒在即时检测领域的最新研究进展,重点介绍了其在蛋白质、核酸以及几类病原体检测方面的应用,并对基于磁性纳米粒的即时检测技术发展方向及应用前景进行了展望。     

氟硅烷自组装单分子膜的制备及其摩擦学性能

利用分子自组装技术制备了全氟辛酰胺丙基硅烷单分子膜,用X射线光电子能谱(XPS)对组装膜的表面元素进行了表征;接触角测试表明,该组装膜具有很好的疏水-疏油性,其对水的接触角高达105°,对正十六烷的接触角为50°.摩擦磨损实验结果表明,全氟辛酰胺丙基硅烷自组装单分子膜可以大大降低基片的摩擦系数,使载玻片的摩擦系数从0.85左右降低到0.14左右,而且低负荷下具有很好的耐磨性.     

一类2(1H)-喹喔啉衍生物的电子轰击质谱分析

以邻苯二胺为原料合成表征了一类喹喔啉衍生物；1-烷基-3-甲基-2（1H）-喹喔啉-2-酮（1-alkyl-3-methly-2(1H)-quinoxalin-2-one，简称AMQ，其中alky=H、CH3、Et、n-C3H5、n-C5H11、n-C16H33)。用电子轰击电离质谱（EI-MS）和核磁共振谱图（^1H-NMR)鉴定了AMQ，研究了不同取代基对这类化合物EI-MS谱图的影响，分析得到一些裂解规律。结果表明：所有样品谱图中均有芳香化合物的特征CnHn^ 系列峰m/z78，65，52，39和（或）m/z77、76、64、63、51、50、38、37。对于末取代的样品及低级烷烃取代的样品，谱图中的基峰为分子离子峰，对于取代基中碳数大于等于3的样品。谱图中的基峰不是分子离子峰，分子离子峰强度随着碳数的增加而降低。这些样品一般容易发生骨架重排，丢失一分子CO，生成1-烷基-2-甲基苯并哒唑正离子。此外，还讨论了谱图中其它的一些碎片离子峰。这对于研究和指导喹喔啉衍生物 的合成，探讨它们在药效及结构特征与生理活性的关系等方面具有重要的应用价值和理论意义。     

Copper phosphonates with dinuclear and layer structures: a structural and magnetic study

Hydrothermal reactions of copper (II) nitrate with 1-hydroxycyclohexanephosphonic acid [C₆H₁₀(OH)PO₃H₂] or Δ¹-cyclohexenephosphonic acid [C₆H₉PO₃H₂] have resulted in three new copper phosphonates, namely, Cu(C₆H₁₀(OH)PO₃)(H₂O)₂ (1), Cu(C₆H₁₀(OH)PO₃) (2) and Cu(C₆H₉PO₃)(H₂O) (3). Compound 1 has a dinuclear structure in which two {CuO₅} square pyramids are bridged by two {CPO₃} tetrahedra through corner sharing. The dimers are connected through intermolecular hydrogen bonds, forming supramolecular layers. Both compounds 2 and 3 show layer structures typical for metal mono-phosphonates, in which the inorganic metal-containing layers are separated by cyclohexane or cyclohexene groups. The magnetic studies show that ferromagnetic interactions are mediated between copper centers in compound 1. In compounds 2 and 3, antiferromagnetic interactions are dominant.     

激光参数对甲醇激光表面反应性能的影响规律

以Ｓｉｏ２和ＰＭｏ１２为表面材料，用可选频脉冲ＴＥＡ－ＣＯ２激光器作光源，考察了激发频率、激光强度、脉冲次数和脉冲间隔等激光参数对甲醇激光分解反应性能的影响规律。结果表明：甲醇的激光表面反应具有频率选择性，激发频率不同，甲醇分解率也不同；不同表面上激发次数影响规律不同，随着激发次数增加，甲醇转化率增加；脉冲间隔的改变只影响转化率，脉冲间隔越小，能量利用率越高，甲醇分解率越高；激光强度的提高可增加甲