Design,Synthesis, and Characterization of Photolabeling Probes for the Study of the Mechanisms of the Antiviral Effects of Ribavirin

Ribavirin, the only small molecule available so far for treating hepatitis‐C‐virus infection, was recently used in an emergency context to treat patients with severe acute respiratory syndrome (SARS) in the early stages of the disease. To study the mechanisms responsible for the antiviral effects of ribavirin by using a photolabeling approach, we designed, synthesized, and characterized the azidotriazole nucleosides 1 and 2 as photolabeling probes of ribavirin. These probes were synthesized either by performing nucleophilic substitution of the corresponding bromotriazole nucleoside with NaN₃ (Scheme 2) or by directly coupling the azidotriazole with the protected ribose sugar (Scheme 4). The azidotriazole nucleosides 1 and 2 showed a fast, clear‐cut photochemical reaction, which suggests that they are promising candidates for use in photolabeling studies.     

The Effects of M2O3 on Stabilizing Monocopper over the Surface of Cu-ZnO-M2O3 Catalysts for Mathanol Synthesis

The effects of M₃O₃ (M = Al, Sc etc.) in Cu-ZnO-M₂O₃ catalysts on methanol synthesis at low pressure were studied with ESR, XPS and TPR spectroscopy. The results of ESR showed that the generation of monovalent cationic defects was because the valence state and electronic charge on the ZnO lattice lost their balance as M³⁺ doped into ZnO. The induced effect by Sc³⁺ is stronger than that by Al³⁺. The results of XPS and TPR indicated that the amount and stabilization of Cu⁺ on the surface of reduced copper-based catalyst and its catalytic activity were affected by the monovalent cationic defects on the surface of ZnO.     

咪喹莫特的波谱学数据与结构表征

对咪喹莫特的红外(IR)、紫外(UV)、质谱(MS)、氢-氢相关谱(^1H--^1H COSY)、碳氢相关谱(HMQC)、碳氢远程相关谱(HMBC)予以解析并进行了报道。对所有的^1H NMR、^13C NMR谱的信号进行了归属；讨论了质谱的主要碎片离子的可能的裂解方式和红外特征吸收峰所对应的官能团的振动形式。     

高效前沿分析的发展及在药物-蛋白结合研究中的应用

介绍了高效前沿分析方法的原理、特点、种类，综述了它在药物与蛋白结合研究中的应用及国内外研究概况；通过与高效液相色谱／前沿分析比较，阐明了毛细管电泳／前沿分析在药物蛋白结合研究中的优势；分析了在药物与蛋白结合研究中所采用的各种研究方法，通过与这些研究方法的比较，阐明了高效前沿分析的优越性及其广阔的应用前景，同时提出了在高效前沿分析方法中有待完善和注意的问题。     

Cure reaction and phase behavior of liquid crystalline epoxides-anhydride systems

A series of novel liquid crystalline epoxides with lateral substituents were cured with anhydrides and the cure kinetics was investigated by non-isothermal DSC technique. The results showed that the lengths of lateral substituents have great effect on the value of Ea. The curing reaction became less active, when the liquid crystalline epoxides have long lateral substituents and were controlled by diffusion at the late stage of cure. A nematic structure was observed by POM and XRD.     

Solution-phase synthesis and electrochemical hydrogen storage of ultra-long single-crystal selenium submicrotubes

Ultra-long single-crystalline trigonal selenium submicrotubes were synthesized using a facile one-step solution-phase approach with the assistance of nonionic surfactant Polyoxyethylene(20)sorbitan monolaurate (Tween-20), which turned out to be significant for the formation of ultra-long Se submicrotubes. XRD, Raman, SEM, and TEM were adopted to characterize the morphology, structure and phase composition of the as-prepared Se products. It was found that the length of the obtained Se submicrotubes was over 100 microm. By variation of the experimental parameters, the t-Se spheres, nanowires, and broken microtubes can be prepared. The possible growth mechanism of the ultra-long selenium submicrotubes was explained. In addition, we have also demonstrated that the synthesized ultra-long t-Se submicrotubes using the Tween-20-assisted approach can electrochemically charge and discharge with the high capacity of 265 mAh/g (corresponding to 0.97 wt % hydrogen in SWNTs) under normal atmosphere at room temperature. Cyclic voltammetry was adopted to investigate the adsorption-oxidation behavior of ultra-long selenium submicrotubes. It was observed that the morphology of the synthesized selenium products had a remarkable influence on their capacity of electrochemical hydrogen storage. These differences in hydrogen storage capacity are likely due to the size and density of tubes as well as the microcosmic morphology of different Se samples. The as-obtained ultra-long Se submicrotubes are expected to find wide applications in hydrogen storage, high-energy batteries, and optoelectronic, biologic, and catalytic fields as well as in the studies of structure-property relationships. This simple Tween-assisted approach might be extended to the preparations of one-dimensional nanostructures of tellurium and other anisotropic materials.     

载体γ-Al2O3和钐对非晶态NiB合金热稳定性的影响

用化学还原法制备了NiB、NiB/Al2O3和NiBSm/Al2O3三种催化剂，它们都呈非晶结构.用等离子耦合发射光谱仪(ICP)对催化剂组分进行了分析，采用差示扫描量热法（DSC）对三种催化剂进行了热稳定性分析.结果表明，载体的引入使非晶态NiB合金的体相组成中B的含量降低.将非晶态NiB合金负载到γ-Al2O3上,可以明显改善非晶态合金的热稳定性，少量Sm可以进一步提高晶化温度.晶化激活能数据亦表明了载体和Sm对非晶结构具有良好的稳定作用.载体和Sm可能通过不同的作用提高了非晶态合金的热稳定性.     

Facile solvent-free synthesis of pure-phased AlN nanowhiskers at a low temperature

Pure hexagonal aluminum nitride (AlN) nanowhiskers have been successfully synthesized by directly reacting AlCl₃ with NaN₃ in non-solvent system at the low temperature of 450 °C for 24 h. The obtained products are characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy and selected area electron diffraction, which show that the obtained products are hexagonal phase AlN nanowhiskers with width from 10 to 80 nm and length up to several micrometers. The influencing factors of the formation of AlN nanowhiskers were discussed and a possible growth mechanism for AlN nanowhiskers was proposed. Additionally, the study on the corresponding optical properties and catalytic properties is also carried out.     

用DCC/DMAP合成N-苄氧羰基氨基酸薄荷酯

以乙腈为溶剂, 用DCC/DMAP偶合法合成了5个N-苄氧羰基氨基酸薄荷酯, 产率90%～94%. 起始原料氨基酸包括: 甘氨酸, DL-蛋氨酸, β-丙氨酸, L-缬氨酸和L-脯氨酸. 给出了目标产物的氢谱、碳谱、红外光谱、质谱、高分辨质谱和元素分析数据.     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.