Precise measurement of magnetic moment of short-lived β-emitting nuclei12B ( I π=1+, T 1/2=20.18 ms)

The spin polarized β-emitting nuclei¹²B (I ^π=1⁺,T _1/2=20.18 ms) were produced by the nuclear reaction¹¹B(d, p)¹²B and by the selection technique of the incident deuteron energy and the¹²B recoil angle following the nuclear reaction. The nuclear magnetic moment of the short-lived nuclei¹²B was measured by β-NMR with the β-NMR and β-NQR setup established for the first time in China. The nuclear magnetic moment of¹²B was determined to be μ=0.99993±0.00048 nm org=0.99993±0.00048 after the precise correction of the Knight shift.     

Vibration analysis of a beam with PCLD Patch

An analytical approach for vibration response analysis of a beam with single passive constrained layer damping (PCLD) patch is presented. The governing equation of motion of the beam is firstly derived on the basis of an energy approach and the Lagrange equation. The noval contribution is that a third admissible function is introduced to represent the longitudinal displacements of the constraining layer in the PCLD patch when the assumed-modes method is applied for discretizing the governing equation. In conventional analytical approaches, only two admissible functions are used together with a longitudinal static equilibrium equation of a section of base beam or constraining layer. Comparison of the computational results from the proposed analytical approach and the conventional analytical approach as well as a commercial FEM code reveals that the proposed analytical approach can describe the vibration responses of the damped beam more accurately for commonly used viscoelastic material (VEM) layer in the PCLD patch while the conventional analytical approach, in general, overestimates the damping effects of the PCLD patch. The advantages and disadvantages of the proposed analytical approach and conventional analytical approach are discussed through some case studies.     

稀土配合物Eu(asprin)_3phen发光特性的研究

将稀土配合物Eu(asprin)_3phen掺杂到导电聚合物PVK中,制成结构分别为ITO/PVK:RE配合物/LiF/AI(1),ITO/PVK:RE配合物/PBD/LiF/AI(2)的电致发光(EL)器件。发现二者的电致发光谱存在着较大的差别:在器件(1)中,来自Eu~(3 )的位于594nm(~5D_0→~7F_1)和614nm(~5D_0→~7F_2)处的发光强度大致相当,而在器件(2)中,EL主要来自Eu~(3 )位于614nm的发光,594nm处的发光很弱,与薄膜状态下的光致发光谱(PL)一致。并针对此现象进行了初步讨论。     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

谈谈电磁污染

由于无线电广播、电视、通讯、及微波技术的迅猛普及,射频设备的功率成倍提高,地面上的电磁辐射已大幅度增加,电磁波已成为一种新型污染.1 电磁污染的特点 电磁污染是继水质污染、大气污染、噪声污染之后的第四大污染,前三种污染可看、可闻、可听,而电磁波的污染则是看不见、摸不着、闻不到,却又是无处不在的污染.     

生物分子拉曼散射测定过程中荧光背景的抑制

拉曼共焦技术、表面拉曼增强技术以及降低入射激光强度的方法，被运用于SOD、DNA等生物分子拉曼散身实验中，以抑制其荧光背景，改善光谱质量。     

A new fluorescent chemosensor for transition metal cations and on/off molecular switch controlled by pH

A new fluorescent chemosensor with imidazole as ionophore was synthesized by the selective derivation of calixarene, which can effectively recognize Cu²⁺ and Zn²⁺ leading to different fluoroscopic behaviors in CH₃OH-H₂O. This system could be considered as a molecular switch. By modulating the pH of the solution, on-off-on fluorescent switching is carried out upon combinatory addition of acid, base and Cu²⁺.     

The Exact Hausdorff Measure Function of the Level Sets of Multi-parameter Symmetric Stable Process

In this paper, we investigate the Hausdorff measure for level sets of N-parameter Rd-valued stable processes, and develop a means of seeking the exact Hausdorff measure function for level sets of N-parameter Rd-valued stable processes. We show that the exact Hausdorff measure function of level sets of N-parameter Rd-valued symmetric stable processes of index α is Ф（r） = r^N-d/α （log log l/r）d/α when Nα 〉 d. In addition, we obtain a sharp lower bound for the Hausdorff measure of level sets of general （N, d, α） strictly stable processes.     

微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.