Ionic liquid functionalized graphene oxide for enhancement of styrene‐butadiene rubber nanocomposites

Ionic liquid 1‐allyl‐3‐methyl‐imidazolium chloride (AMICl) is used to fine‐tune the surface properties of graphene oxide (GO) sheets for fabricating ionic liquid functionalized GO (GO‐IL)/styrene‐butadiene rubber (SBR) nanocomposites. The morphology and structure of GO‐IL are characterized using atomic force microscope, X‐ray diffraction, differential scanning calorimetry, X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV‐vis spectra and Raman spectra. The interaction between GO and AMICl molecules as well as the effects of GO‐IL on the mechanical properties, thermal conductivity and solvent resistance of SBR are thoroughly studied. It is found that AMICl molecules can interact with GO via the combination of hydrogen bond and cation–π interaction. GO‐IL can be well‐dispersed in the SBR matrix, as confirmed by X‐ray diffraction and scanning electron microscope. Therefore, the SBR nanocomposites incorporating GO‐IL exhibit greatly enhanced performance. The tensile strength, tear strength, thermal conductivity and solvent resistance of GO‐IL/SBR nanocomposite with 5 parts per hundred rubber GO‐IL are increased by 505, 362, 34 and 31%, respectively, compared with neat SBR. This method provides a new insight into the fabrication of multifunctional GO‐based rubber composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Effective transformation of cellulose to 5-hydroxymethylfurfural catalyzed by fluorine anion-containing ionic liquid modified biochar sulfonic acids in water

This article first discloses that the fluorine anion-containing ionic liquids-functionalized biochar sulfonic acids (BCSA-IL-F_1–3s), which were simply synthesized by an ionic exchange of 1-trimethoxysilylpropyl-3-methylimidazolium chloride (IL-Cl) grafted on the BCSA with CF₃SO₃H (HF₁), HBF₄ (HF₂), HPF₆ (HF₃), respectively, can efficiently catalyze cellulose hydrolysis into reducing sugars (RSs) and 5-hydroxymethyl furfural (HMF) in water under microwave irradiation. This process provides a very high catalysis efficiency (turnover numbers, 4.03–4.89) at mild temperature (80 °C) for 3 h, but also possesses an excellent repeatability. More outstandingly, they can achieve much higher HMF yields (12.70–27.94%) compared to the IL-Cl-functionalized BCSA catalyst (HMF yields are lower than 0.1%) under the same reaction conditions. This is likely because the introduction of IL-F_1–3s groups can significantly improve the accessibility, acidity and thermal stability of BCSA’s SO₃H sites, as supported by evidence from a solid ³¹P NMR spectrum and thermogravimetric analysis. It is proposed that the good selectivity for HMF perhaps originates from a co-catalysis action of the IL-F_1–3s and SO₃H groups on BCSA-IL-F_1–3s in the further conversion of RSs to HMF.     

半导体电极的平带电位

平带电位(E_(fb))是半导体/电解质溶液体系的重要概念,是半导体电极在平带状态时的电极电位,它是半导体电极特有的可以实验测定的物理量。利用Mott-Schottky曲线以及光电化学等方法可以测定平带电位,判断半导体的类型以及估算半导体的载流子浓度,其数值可用于推测半导体的能级结构,确定半导体材料的价带或导带能级位置。这对于与太阳能开发利用相关的半导体光催化和光电化学研究都是非常重要的。本文分析了半导体电极的能带弯曲及影响因素,首次提出半导体界面层内费米能级弯曲,阐明半导体电极平带电位的物理意义及其测定方法,以帮助初学者理解和应用平带电位。     

矩形多环芳烃的合成

本文用3,4-二苯基-2,5-二(3,5-二溴苯基)环戊二烯酮(4a)与二苯乙炔(5a)通过Diels-Alder环加成反应得到1,2,4,5-四苯基-3,6-二(3,5-二溴苯基)苯(6a)。化合物6a通过经典的Suzuki偶联反应得到1,2,4,5-四苯基-3,6-二(3,5-二(4-十二烷基噻吩))苯基苯(8a),再利用Fe Cl3作为氧化剂发生Scholl氧化脱氢关环反应,得到目标化合物1a。采用类似合成方法,得到目标化合物1b。化合物的结构均通过1H NMR和MALDI-TOF MS表征,并对其光谱特征、热性能及电学性能进行了初步研究。     

Synthesis of biofuel via levulinic acid esterification over porous solid acid consisting of tungstophosphoric acid and reduced graphene oxide

Research on Chemical Intermediates - Reduced graphene oxide (rGO) was synthesized by chemical reduction of graphene oxide with hydrazine hydrate and used as supports to prepare a series of...     

基于表面起皱法的梯度图案的可控制备

报道了基于非刻蚀法的表面起皱机制来实现高分子薄膜表面的周期性梯度图案的简单可控制备.即对于处于机械拉伸状态的聚二甲基硅氧烷(PDMS)弹性基底,在其底部垫入"积木",而后对其进行紫外-臭氧(UVO)和氧等离子体(OP)的联合表面处理."积木"的加入引起了表面处理后表面硅氧层(SiOx)梯度厚度的形成,进而当释放拉伸应变后,诱导产生了梯度皱纹图案.结果表明:当UVO与OP联用处理时,不仅实现了较小拉伸应变下梯度皱纹形貌的制备,而且扩大了UVO单独使用时梯度皱纹周期的变化范围.通过OP与UVO的处理顺序和处理时间等因素的简单调节,进一步实现了不同梯度皱纹微结构的精细构筑.     

静电喷雾结合热压处理制备荷负电PVA-SA/PAN纳米纤维基复合滤膜及其纳滤性能研究

以静电纺丝聚丙烯腈(PAN)纳米纤维作为多孔支撑层,以亲水材料聚乙烯醇(PVA)和海藻酸钠(SA)为亲水表层材料,通过静电喷雾技术将亲水表层材料沉积在纳米纤维多孔基膜表面,然后将表层PVA-SA纳米串珠层通过水蒸气加湿辅助热压成膜处理在PAN基膜上软化压延形成完整的致密薄膜,最后经过戊二醛交联制备PVA-SA/PAN纳米纤维基复合滤膜.通过对加湿时间、热压温度、热压时间以及PVA-SA静电喷雾时间等成膜工艺条件和交联条件进行优化制备出结构完整的PVA-SA/PAN纳米纤维基复合滤膜.所制备的复合滤膜荷负电,它对阴离子染料具有较好的过滤效果:在0.6 MPa的操作压力下对100 mg/kg的固绿染料的渗透通量为57.1 L/(m~2h),截留率为96.8%.     

两种双核金属锰(Ⅱ)配合物的合成与结构研究

在水热和溶剂热条件下,以4,4′-三苯胺二甲酸(H_2L)为有机多齿羧酸,与金属含锰化合物分别与邻菲罗啉和4,4′-二咪唑联苯2种含氮配体反应,合成了2种新型的含金属锰的有机-无机配位聚合物[Mn_2L_2(phen)_2]·DMF(1)和Mn_2L_2(bibp)_2(2).通过X射线单晶衍射确定其结构,并用红外光谱、元素分析、热重和粉末X射线衍射仪等对其进行表征.结果显示配合物1属三斜晶系,Pī空间群,是由一维双链通过π-π共轭作用组装成的三维超分子网络;配合物2属三斜晶系,Pī空间群.是由二维层结构以ABAB层层堆叠的方式形成的三维框架结构.     

磁性壳聚糖复合微球的制备及其Cu~(2+)吸附性能

以球磨后的粉煤灰磁珠(MS)颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO_2和壳聚糖(CS),制备了MS@SiO_2@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO_2@CS微球的比饱和磁化强度可达7.04 emu·g~(-1)。Cu~(2+)离子吸附实验表明,所得磁性壳聚糖微球对Cu~(2+)具有良好的吸附能力,最大吸附量可达11.08 mg·g~(-1);而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO_2@CS微球对Cu~(2+)离子的吸附符合准二级动力学模型,以化学吸附为主。     

Efficient and selective analytical method for the quantification of a β-adrenoceptor agonist,isoproterenol, by LC–MS/MS and its application to pharmacokinetics studies

Isoproterenol (ISO) is a synthetic catecholamine with a powerful cardiac stimulate, bronchial smooth and skeletal muscle relaxation, coronary artery and peripheral vasodilator effects. In this study, a simple, rapid, and selective liquid chromatography–tandem mass spectrometry has been developed for the determination of ISO in rat plasma. Proteins were precipitated in plasma samples with 0.1?g?mL^?1 trichloroacetic acid and the ISO/internal standard (IS) were separated on a C₈ column. The ISO was detected by a triple-quadrupole mass spectrometer with electrospray ionization source. The transitions of m/z 212.1?→?193.9 for ISO and m/z 285.2?→?193.2 for IS were conducted through multiple reaction monitoring mode. This method was linear over the range of 2–500?n?g?mL^?1. The intra- and inter-day assay precision were observed between 3 and 10%. The accuracy was within ±11%. Stability study results demonstrated that ISO was stable in the autosampler at 4°C for 24?hr, and for 8?hr at room temperature. Only one freeze–thaw cycle at ?80°C for 24?hr was found to be stable. The validated method was successfully applied to a pharmacokinetic study of ISO in rats following subcutaneous administration.