In-house quality control material of nicarbazin and narasin in eggs: preparation and inter-laboratory evaluation

Coccidiostats are a group of pharmacologically active substances widely used in veterinary practice. Their residues are detected relatively often in poultry tissues and egg samples analyzed as part of official residue control programs in the European Union. Therefore, accuracy of quantitative results needs to be monitored through internal and external quality control studies. In addition, the use of materials containing incurred residues would be welcome to for ongoing monitoring of the method accuracy. Unfortunately, in the field of veterinary drug residues, certified reference materials are often unavailable. Therefore, in-house quality control material of incurred lyophilized eggs containing narasin and nicarbazin has been produced and characterized. The eggs originated from hens receiving feed with coccidiostat premix Maxiban were mixed to obtain presumed concentrations of residues and freeze-dried. Homogeneity of the material was verified by the duplicate analysis of ten random samples, and the results proved that the between samples variation was negligible in comparison with the method repeatability. No measurable loss of analytes was observed within 1 year; the slope of the regression line of the results of stability measurements was not significantly different from zero. The assigned values were expressed as medians of the results of inter-laboratory comparison performed in four different European laboratories; the uncertainty of the material was estimated, taken into consideration all above tests, resulting in (14.4 ± 2.53) µg/kg for nicarbazin and (7.91 ± 1.52) µg/kg for narasin.     

悬浮聚合制备大尺寸梭形聚苯乙烯粒子新方法及机理研究

利用氢氧化钾对苯乙烯-马来酸酐交替共聚物(SMA)进行水解,所得中等皂化程度的SMA水解产物(SMAA)在水溶液中具有刚性棒状直链构型;将此特殊结构的大分子作为分散剂用于苯乙烯悬浮聚合,通过控制搅拌速度和油水比,可得到梭形聚苯乙烯粒子;在优化条件下,粒子平均长度6.8 mm,宽度1.4 mm,厚度0.5 mm,长径比约5.0.其可能的机理为,中等皂化程度的刚棒直链型SMAA在聚合物"软粒子"表面能形成难以"回复"的有效保护层,使由剪切形成的变形聚合物"软粒子"在聚合过程中能保持形状和尺寸的稳定,从而得到梭形聚合物粒子.     

不同铝源与铈锆复合的性能及机制

制备了CZ及CZ/AL,CZ/AS与CZ/AM(铈锆固溶体与氧化铝的复合氧化物),通过X射线衍射(XRD)、比表面(BET)、储放氧(OSC)和透射电镜(TEM)等手段对样品的晶相结构、比表面、储氧性能及微观结构等进行表征。结果表明:CZ/AL及CZ/AS都可形成单一稳定的立方晶型结构,氧化铝的掺杂可提高铈锆固溶体的比表面及耐高温稳定性,其中CZ/AS的比表面最高,CZ/AL储氧性能最大。此外,其复合机理表明,Al2O3与铈锆固溶体在纳米级别上的化学复合与纯粹的机械混合相比,前者具有更加稳定的晶型结构、更大的比表面和更好的储氧性能。     

树状功能高分子负载锡配合物的合成及其催化酮的Baeyer-Villiger氧化反应性能研究

通过固相合成方法将聚酰胺-胺树状分子担载于氯球上,对其外围分别用2,4-二羟基苯甲醛和邻羟基苯甲醛进行修饰,再与SnCl2.2H2O反应,形成配体不同的两类树状高分子锡配合物.将此类配合物用作30%的双氧水氧化酮的Baeyer-Villiger反应的非均相催化剂,具有较好的催化活性.2-金刚烷酮、环己酮、3-甲基-2-戊酮等都转化为相应的酯和内酯,底物的转化率和产物选择性均较高.对2-羟基苯甲醛、2,4-二羟基苯甲醛和邻羟基苯甲醛修饰的不同类型催化剂催化下的反应进行比较,发现配体对锡的担载量和催化活性均有不同程度的影响.其中邻羟基苯甲醛修饰的配合物因具有较高的锡担载量而具有了最佳的催化活性.此催化体系使用环境友好的低浓度双氧水为氧化剂,催化剂制备方法简单、催化反应完成时间短、催化剂在多次重复利用后活性没有明显降低,可回收和重复利用.     

季铵盐型螯合树脂的合成及其对铅离子的吸附研究

合成了一种含有季铵盐结构的希夫碱型螯合树脂(CPS-DMA-S-HCTA),研究了其对Pb(II)离子的吸附和脱附行为.树脂红外光谱分析和元素分析结果表明,成功合成了CPS-DMA-S-HCTA螯合树脂;树脂的热分析结果表明,CPS-DMA-S-HCTA树脂的初始分解温度为205℃,具有良好的热稳定性;静态实验结果表明,在研究的浓度范围内,吸附平衡数据符合Freundlich等温吸附方程,且吸附为放热、混乱度减小的自发过程,吸附过程以化学吸附为主,298 K,Pb(Ⅱ)溶液的初始浓度为600 mg/L时,适宜的吸附pH为5~6,平衡吸附量为96.1 mg/g,吸附达到平衡的时间约为10 min.采用1.5 mol/L的硝酸溶液作脱附剂,脱附率可达98%以上,解吸速率快,10 min左右流出液中重金属离子的浓度几乎为0 mg/L.经过10次吸附-解吸-吸附研究表明,树脂可重复使用性强.     

新一代运载火箭时序仿真系统信号完整性分析

新一代运载火箭时序仿真系统具有数字电路速度快、集成度高的特点,系统要求发出多路高精度时序、时串信号以满足新一代运载火箭地面测试设备的检查与校准需求,因此信号完整性问题在系统设计中不容忽视。针对仿真系统的典型模块(USB 3.0 Super-speed差分线、FPGA外设数据走线、时钟走线)进行建模分析仿真得出PCB硬件电路设计参数,给出时序仿真系统设计信号完整性问题的抑制和解决方法,优化了板级信号质量,改善系统可靠性、工作连续性和输出精度,可有效提高新一代运载火箭测试效率和测试可靠性。     

一种新的珍珠层厚度测量方法

珍珠层厚度是是珍珠价值最主要的衡量指标之一,目前珍珠层厚度的无损测量方法主要采用光学相干层析成像技术和X射线技术。光学相干层析成像技术在实际测量时精度较低。在研究X射线测量原理的基础上,提出了一种新的珠层厚度测量方法。首先介绍了灰度图像的边缘识别算法和珍珠核、珍珠外圆度拟合算法,其次提出了一种引入对照机制的珍珠层测量算法,最后还对算法的误差进行了分析,算法的误差可以控制在0.02%以内。实际的测量也验证了本测量方法具有很高的精度。     

一类Hermitian鞍点矩阵的特征值估计

本文研究了一类大型稀疏Hermitian鞍点线性系统Az=(B E E* 0)(x y)=(f g)=b系数矩阵的特征值,其中B∈C~(p×p)是Hermitian正定阵矩阵,E∈C~(p×q)是列降秩.本文分别给出了该系数矩阵正特征值与负特征值界的一个估计式,同时通过数值算例验证本文所给出的特征值界的估计是合理且有效的.     

Antileukemic α-pyrone derivatives from the endophytic fungus Alternaria phragmospora

Four new (1–4) and two known (5 and 6) α-pyrone derivatives have been isolated from Alternaria phragmospora, an endophytic fungus from Vinca rosea, leaves. The isolated compounds were chemically identified to be 5-butyl-4-methoxy-6-methyl-2H-pyran-2-one (1), 5-butyl-6-(hydroxymethyl)-4-methoxy-2H-pyran-2-one (2), 5-(1-hydroxybutyl)-4-methoxy-6-methyl-2H-pyran-2-one (3), 4-methoxy-6-methyl-5-(3-oxobutyl)-2H-pyran-2-one (4), 5-(2-hydroxyethyl)-4-methoxy-6-methyl-2H-pyran-2-one (5), and 5-[(2E)-but-2-en-1-yl]-4-methoxy-6-methyl-2H-pyran-2-one (6). Compounds 2 and 4 showed moderate antileukemic activities against HL60 cells with IC₅₀ values of 2.2 and 0.9 μM and against K562 cells with IC₅₀ values of 4.5 and 1.5 μM, respectively.