Chemical Constituents of Ligusticum sinensis Oliv.

The new phenylpropanoid diglycoside ligusinenoside A ( 1 ), and the two new 8,4′‐oxyneolignan(‘8‐O‐4′‐neolignan’) diglycosides ligusinenosides B ( 2 ) and C ( 3 ), together with nine known compounds, were isolated from the rhizomes of Ligusticum sinensis Oliv. The structures of 1 – 3 were elucidated on the basis of spectroscopic analyses.     

光电倍增管脉冲性能研究

采用外腔式电光开光,调制主动照相探测光源,使光电倍增管处于脉冲工作状态下,以提高光电倍增管的输出幅度和动态范围,改善信号的信噪比,同时避免样品和探测器受长时间强激光照射.对滨松H6780光电倍增管进行了调试,使其线性输出电流由静态的0.1mA提升到脉冲状态的4.4mA,信噪比提高4.5倍.该技术对其他光敏探测有借鉴意义.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Precise measurement of magnetic moment of short-lived β-emitting nuclei12B ( I π=1+, T 1/2=20.18 ms)

The spin polarized β-emitting nuclei¹²B (I ^π=1⁺,T _1/2=20.18 ms) were produced by the nuclear reaction¹¹B(d, p)¹²B and by the selection technique of the incident deuteron energy and the¹²B recoil angle following the nuclear reaction. The nuclear magnetic moment of the short-lived nuclei¹²B was measured by β-NMR with the β-NMR and β-NQR setup established for the first time in China. The nuclear magnetic moment of¹²B was determined to be μ=0.99993±0.00048 nm org=0.99993±0.00048 after the precise correction of the Knight shift.     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

Lower-dimensional linear complementarity problem approaches to the solution of a bi-obstacle problem

A globally convergent Broyden-like method for solving a bi-obstacle problem is proposed based on its equivalent lower-dimensional linear complementarity problem. A suitable line search technique is introduced here. The global and superlinear convergence of the method is verified under appropriate assumptions.     

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers.     

A multifractal decomposition according to rate of returns

For one‐dimensional simple symmetric random walk, the Hausdorff and packing dimensions of sets of sample paths with prescribed rate of returns to the origin are determined. This gives a multifractal decomposition of the underlying sample space. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Multibody dynamics of aircraft occupants seated behind interior walls

To improve aircraft crash safety, conditions critical to occupants survival during a crash must be known. In view of the importance of this problem, studies of post-crash dynamic behavior of victims are necessary in order to reduce severe injuries. In this study, crash dynamics program SOM-LA/TA, incorporating a dynamic model of the human body with a finite element model of the seat structure was used. Modifications were performed in the program for reconstruction of an occupant's head impact with the interior walls or bulkhead. A viscoelastic-type contact force model was used to represent the compliance characteristics of the bulkhead. Correlated studies of analytical simulations with impact sled test results were accomplished. A parametric study of the coefficients in the contact force model was then performed in order to obtain the correlations between the coefficients and the Head Injury Criteria. A measure of optimal values for the bulkhead compliance and displacement requirements was thus achieved in order to keep the possibility of a head injury as little as possible. This information could in turn be used in the selection of suitable materials for the bulkhead, instrument panel, or interior walls of an aircraft.