钴(Ⅱ)-5-取代邻菲罗啉-α-氨基酸三元配合物的稳定性研究

本文在25.0±0.1℃,I=0.1mol·dm^-3KNO₃存在下,采用pH法测得了5-取代邻菲罗啉的质子化常数以及钴(Ⅱ)与5-取代邻菲罗啉、α-氨基酸的二元、三元配合物的稳定常数。结果表明三元配合物的稳定性与5-取代邻菲罗啉的质子化常数、取代基常数均存在直线自由能关系。并用三元配合物稳定性的表征值logK_M、△logK,讨论了三元配合物的稳定性,发现钴(Ⅱ)与配体5-取代邻菲罗啉之间也存在着d-p反馈π键。该π健的强度对三元配合物稳定性有着显著影响。     

Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

制备方法对Mg1.9Al0.1Ni合金储氢性能的影响

文中采用机械合金化(MA)和氢化燃烧法(HCS)制备了Mg1.9Al0.1Ni,通过对它们储氢性能的对比研究发现,MA优于HCS.采用MA制得的Mg1.9Al0.1Ni储氢合金具有较高的活性和高储氢量,对PCT结果进行计算,得出温度和氢平衡压的关系式.Mg1.9Al0.1Ni(MA)553K时100s内吸放氢量分别为2.67和2.54 mass%H.用XRD方法进行物相分析,表明添加适量Al没有改变Mg2Ni的物相结构,由于MA能够制备出纳米晶粒,使得Mg1.9Al0.1Ni合金具有更好的储放氢动力学性能.     

GC-MS法测定粮谷及油料中55种有机磷农药残留量

采用ASE-300快速溶剂萃取仪提取样品中农药残留量,提取液经二氯甲烷液-液分配、凝胶色谱柱（GPC）净化,固相萃取柱（活性炭）再净化,浓缩定容后,用气相色谱-质谱仪（GC-MS）测定,外标法定量.采用选择离子检测进行阳性确证.选择玉米、糙米、大豆、花生为实验样品、敌敌畏等55种农药添加水平在0.5～2.00 mg/kg时,该方法回收率为68%～117%;精密度为4.04%～11.76%;方法测定低限为0.005～0.100 mg/kg,各项指标均满足有关要求.     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

纳米二氧化锆在甲醇合成催化剂Cu/Ga2O3/ZrO2中的作用

The introduction of mesoporous nanosize zirconia to the catalyst for methanol synthesis dedicates the nanosized catalyst and mesoporous duplicated properties. The catalyst bears the larger surface area, larger mesoporous volume and more uniform diameter, more surface metal atoms and oxygen vacancies than the catalyst prepared with the conventional coprecipitation method. The modification of microstructure and electronic effect could result in the change of the reduced chemical state and decrease of reducuction temperature of copper, donating the higher activity and methanol selectivity to the catalyst. The results of methanol synthesis demonstrate that the Cu^＋ is the optimum active site. Also, the interaction between the copper and zirconia shows the synergistic effect to fulfil the methanol synthesis.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Influence of pH on electrophoretic behavior of phenothiazines and determination of pKa values by capillary zone electrophoresis

The influence of buffer pH on the electrophoretic behavior of 13 structurally related phenothiazines and determination of pK(a) values by capillary zone electrophoresis (CZE) were investigated. The results indicate that phenothiazines with a piperazine substituent behave quite differently from those with substituents having an aliphatic side chain or a piperidine moiety over the pH range studied. To separate these phenothiazines, it is preferable to select buffer pH in the range of 2.5-3.5. The pK(a) values of phenothiazines with three different types of substituents attached at the 10-position of the phenothiazine ring were determined. The determination of pK(a) values of phenothiazines allows us to rationalize the influence of buffer pH on the migration behavior of these compounds in CZE.     

Studies on the Physicochemical Properties, Structure and Antitumor Activity of an Oligosaccharide Homologue SnS-2 from the Root of Scrophularia ningpoensis Hemsh

An oligosaccharide homologue named SnS-2 was isolated from the root of Scrophularia ningpoensis Hemsl.SnS-2 was purified by means of gel-permeation chromatography and ion-exchange chromatography. Its physicochemical properties, including carbohydrate content and molecular weight were determined. The structure of SnS-2 was elucidated by chemical methods along with ^1H and ^13C NMR spectroscopy, including two-dimensional DQCOSY and H-detected ^1H, ^13C HMQC experiments. These results show that SnS-2 possesses a backbone consisting of terminal α-Galp-(1→, α-Galp-(1→6), α-Glcp-(1→6) and nonreducing end β-Fruf-(2→. The bioactive assay showed that it could inhibit the growth of Lewis pulmonary carcinoma implanted in mice.     

BDMA-catalyzed DDA-epoxy resin system: Temperature and composition effects on curing mechanism

DSC and IR data on benzyldimethylamine-catalyzed dicyandiamide-DGEBA prepolymer system have been utilized to investigate the influences of temperature and composition on the curing mechanism. Etherification as a competitive reaction is favored at lower temperature. On the other hand, the reaction pathway of dicyandiamide (DDA) varies with temperature, especially at the first stage of reaction. At 100°C, the reaction of DDA is shown to be essentially the substitution of the hydrogen atoms by ring-opening of epoxy groups, giving rise to N-alkyl cyanoguanidine. But at 140°C or 160°C, the initial reaction of DDA involves a transformation of nitrile groups to imine groups. A greater amount of BDMA and a higher amine-to-epoxy ratio favor the etherification. The glass transition temperature T_g is a complex function of these different mechanisms; higher T_g could be reached with a amino-to-epoxy ratio equal to 0.6 and after a curing cycle including a precure at 100°C.